On Tue, Oct 15, 2013 at 11:19:18AM +0200, Nicolas Ferre wrote:
> On 14/10/2013 15:59, Jean-Christophe PLAGNIOL-VILLARD :
> >On 10:43 Thu 10 Oct , Nicolas Ferre wrote:
> >>On older SoC, the "name" field is not filled in the register map.
> >>Fix the way to figure out if the serial port is an uart or an usart for these
> >>older products (with corresponding properties).
> >>
> >>Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> >>---
> >> drivers/tty/serial/atmel_serial.c | 19 ++++++++++++++++++-
> >> include/linux/atmel_serial.h | 1 +
> >> 2 files changed, 19 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> >>index 6b0f75e..c7d99af 100644
> >>--- a/drivers/tty/serial/atmel_serial.c
> >>+++ b/drivers/tty/serial/atmel_serial.c
> >>@@ -99,6 +99,7 @@ static void atmel_stop_rx(struct uart_port *port);
> >> #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
> >> #define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
> >> #define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
> >>+#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
> >>
> >> /* PDC registers */
> >> #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
> >>@@ -1503,6 +1504,7 @@ static void atmel_get_ip_name(struct uart_port *port)
> >> {
> >> struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
> >> int name = UART_GET_IP_NAME(port);
> >>+ u32 version;
> >> int usart, uart;
> >> /* usart and uart ascii */
> >> usart = 0x55534152;
> >>@@ -1517,7 +1519,22 @@ static void atmel_get_ip_name(struct uart_port *port)
> >> dev_dbg(port->dev, "This is uart\n");
> >> atmel_port->is_usart = false;
> >> } else {
> >>- dev_err(port->dev, "Not supported ip name, set to uart\n");
> >>+ /* fallback for older SoCs: use version field */
> >>+ version = UART_GET_IP_VERSION(port);
> >>+ switch (version) {
> >>+ case 0x302:
> >>+ case 0x10213:
> >>+ dev_dbg(port->dev, "This version is usart\n");
> >>+ atmel_port->is_usart = true;
> >>+ break;
> >>+ case 0x203:
> >>+ case 0x10202:
> >>+ dev_dbg(port->dev, "This version is uart\n");
> >>+ atmel_port->is_usart = false;
> >>+ break;
> >>+ default:
> >>+ dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
> >
> >it's not really an error a dev_warn is more oppropriate
>
> As we are already in -rc5 and that these fixes are critical for at91
> platforms, I will not re-spin another patch just for this.
>
> Moreover, I have the feeling that if we end up in this case, it
> means that we are in big troubles because the usart/uart included in
> the product triggering this log is not known (I recall that newer
> products do not have to hit these lines of code).
>
> With these 2 reasons, I prefer to keep my patch like it is.
>
> Greg, can you consider taking these two patches as regression fixes
> for 3.12 (with Tested-by tag from Thomas)?
Is this really a regression from 3.11? What's the worry about waiting
for 3.13-rc1, getting this correct, and then backporting them to the
3.12-stable trees?
I'd prefer that, so, please clean this up properly and resend it, with
the tested-by: lines and I'll queue them up for 3.13-rc1.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
