These aren't necessary after switch and while blocks.
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/tty/nozomi.c | 6 +++---
drivers/tty/serial/bfin_uart.c | 4 ++--
drivers/tty/serial/ip22zilog.c | 2 +-
drivers/tty/serial/max310x.c | 2 +-
drivers/tty/serial/pmac_zilog.c | 2 +-
drivers/tty/serial/sunsab.c | 2 +-
drivers/tty/serial/sunsu.c | 2 +-
drivers/tty/serial/sunzilog.c | 6 +++---
drivers/tty/serial/ucc_uart.c | 2 +-
9 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index d6080c3..cd04293 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -959,7 +959,7 @@ static int receive_flow_control(struct nozomi *dc)
dev_err(&dc->pdev->dev,
"ERROR: flow control received for non-existing port\n");
return 0;
- };
+ }
DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl),
*((u16 *)&ctrl_dl));
@@ -1025,7 +1025,7 @@ static enum ctrl_port_type port2ctrl(enum port_type port,
dev_err(&dc->pdev->dev,
"ERROR: send flow control " \
"received for non-existing port\n");
- };
+ }
return CTRL_ERROR;
}
@@ -1805,7 +1805,7 @@ static int ntty_ioctl(struct tty_struct *tty,
default:
DBG1("ERR: 0x%08X, %d", cmd, cmd);
break;
- };
+ }
return rval;
}
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 3c75e8e..99653e7 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -680,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port)
default:
uart_dma_ch_rx = uart_dma_ch_tx = 0;
break;
- };
+ }
if (uart_dma_ch_rx &&
request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
@@ -765,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
break;
default:
break;
- };
+ }
#endif
free_irq(uart->rx_irq, uart);
free_irq(uart->tx_irq, uart);
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index cb3c81e..1d94205 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -832,7 +832,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
up->curregs[5] |= Tx8;
up->parity_mask = 0xff;
break;
- };
+ }
up->curregs[4] &= ~0x0c;
if (cflag & CSTOPB)
up->curregs[4] |= SB2;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index b2e707a..8d71e40 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -690,7 +690,7 @@ static void max310x_handle_tx(struct uart_port *port)
max310x_port_write(port, MAX310X_THR_REG,
xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- };
+ }
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index f87f1a0..95917ce 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1072,7 +1072,7 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
uap->curregs[5] |= Tx8;
uap->parity_mask = 0xff;
break;
- };
+ }
uap->curregs[4] &= ~(SB_MASK);
if (cflag & CSTOPB)
uap->curregs[4] |= SB2;
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 5d6136b..380fb53 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -894,7 +894,7 @@ static int sunsab_console_setup(struct console *con, char *options)
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
- };
+ }
/*
* Temporary fix.
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 699cc1b..db79b76 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -522,7 +522,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
serio_interrupt(&up->serio, ch, 0);
#endif
break;
- };
+ }
}
} while (serial_in(up, UART_LSR) & UART_LSR_DR);
}
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 135a152..45a8c6a 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -319,7 +319,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
serio_interrupt(&up->serio, ch, 0);
#endif
break;
- };
+ }
}
}
@@ -897,7 +897,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
up->curregs[R5] |= Tx8;
up->parity_mask = 0xff;
break;
- };
+ }
up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB)
up->curregs[R4] |= SB2;
@@ -1239,7 +1239,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
default: case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
- };
+ }
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 8831748..2fd1e17 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -269,7 +269,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
return 1;
bdp++;
- };
+ }
}
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
