Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kevin,
On Friday 19 April 2013 08:22 PM, Kevin Hilman wrote:
Sourav Poddar<sourav.poddar@xxxxxx>  writes:

[...]

Yes, got your point. omap_device_idle should not be called only
for console uart.

Just did a quick testing by including the following hunk on top of my
patch series..

diff --git a/arch/arm/mach-omap2/omap_device.c
b/arch/arm/mach-omap2/omap_device.c
index c226946..7480e87 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -617,8 +617,10 @@ static int _od_suspend_noirq(struct device *dev)
         ret = pm_generic_suspend_noirq(dev);

         if (!ret&&  !pm_runtime_status_suspended(dev)) {
-               if (pm_generic_runtime_suspend(dev) == 0)
+               if (pm_generic_runtime_suspend(dev) == 0) {
+                       omap_device_idle(pdev);
                         od->flags |= OMAP_DEVICE_SUSPENDED;
+               }
         }

         return ret;
@@ -631,6 +633,7 @@ static int _od_resume_noirq(struct device *dev)

         if ((od->flags&  OMAP_DEVICE_SUSPENDED)&&
             !pm_runtime_status_suspended(dev)) {
+               omap_device_enable(pdev);
                 od->flags&= ~OMAP_DEVICE_SUSPENDED;
                 pm_generic_runtime_resume(dev);
         }
And found the wakeup from UART is no more functional.
So, the omap_device_idle gets called for console UART also, thereby
preventing the "no_idle_on_suspend" theory.

Hence, merely putting prepare/complete callback the way I did is not
helping.
We need to delete omap_device_idle also, which I agree is not correct.
So, we need a way to bypass this "omap_device_idle"
call for console UART. ?
OK, I see what's happening now.

How about this: rather than using prepare/complete callbacks, can you
use the runtime_suspend callback to return an error code during suspend?
Yes, that can be done.
(only for the console, and only when no_console_suspend is enabled, and
only during suspend)

Since _od_suspend_noirq checks to be sure the drivers ->runtime_suspend
callback succeeds before it calls omap_device_idle(), if you report a
failure, omap_device_idle will not be called.

True.

~Sourav
Kevin



--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux