Currently, if you set SERIAL8250_CONFIG_RUNTIME_UARTS
to 0, you cannot get any working ports. This change
will enable serial8250_register_port to successfully
register a port even if SERIAL8250_CONFIG_RUNTIME_UARTS
is 0. If you need legacy ports, you will set the
SERIAL8250_CONFIG_RUNTIME_UARTS to the number of legacy
ports you need created at boot time.
Signed-off-by: Karthik Manamcheri <karthik.manamcheri@xxxxxx>
---
drivers/tty/serial/8250/8250.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index cf6a538..65f1478 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void)
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
- for (i = 0; i < nr_uarts; i++) {
+ for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
struct uart_port *port = &up->port;
@@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options)
* if so, search for the first available port that does have
* console support.
*/
- if (co->index >= nr_uarts)
+ if (co->index >= UART_NR)
co->index = 0;
port = &serial8250_ports[co->index].port;
if (!port->iobase && !port->membase)
@@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p)
int line;
struct uart_port *port;
- for (line = 0; line < nr_uarts; line++) {
+ for (line = 0; line < UART_NR; line++) {
port = &serial8250_ports[line].port;
if (uart_match_port(p, port))
return line;
@@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev)
{
int i;
- for (i = 0; i < nr_uarts; i++) {
+ for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
if (up->port.dev == &dev->dev)
@@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
/*
* First, find a port entry which matches.
*/
- for (i = 0; i < nr_uarts; i++)
+ for (i = 0; i < UART_NR; i++)
if (uart_match_port(&serial8250_ports[i].port, port))
return &serial8250_ports[i];
@@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
* free entry. We look for one which hasn't been previously
* used (indicated by zero iobase).
*/
- for (i = 0; i < nr_uarts; i++)
+ for (i = 0; i < UART_NR; i++)
if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
serial8250_ports[i].port.iobase == 0)
return &serial8250_ports[i];
@@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
* That also failed. Last resort is to find any entry which
* doesn't have a real port associated with it.
*/
- for (i = 0; i < nr_uarts; i++)
+ for (i = 0; i < UART_NR; i++)
if (serial8250_ports[i].port.type == PORT_UNKNOWN)
return &serial8250_ports[i];
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
