Support for the WindRiver SBC8560 board was removed in v3.6. But there are still a few lines depending on its obsolete Kconfig macro. Remove these now. Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx> --- Not tested. drivers/tty/serial/8250/8250.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 34eb676..1ebf853 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -117,13 +117,6 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value) * is cleared, the machine locks up with endless interrupts. */ #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) -#elif defined(CONFIG_SBC8560) -/* - * WindRiver did something similarly broken on their SBC8560 board. The - * UART tristates its IRQ output while OUT2 is clear, but they pulled - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) #else #define ALPHA_KLUDGE_MCR 0 #endif -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
