Hi,
On Thu, Mar 07, 2013 at 10:28:37AM +0800, Ley Foon Tan wrote:
> diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
> index 0efc815..661096d 100644
> --- a/drivers/tty/serial/8250/8250.c
> +++ b/drivers/tty/serial/8250/8250.c
> @@ -301,7 +301,28 @@ static const struct serial8250_config uart_config[] = {
> },
> [PORT_8250_CIR] = {
> .name = "CIR port"
> - }
> + },
> + [PORT_ALTR_16550_F32] = {
> + .name = "Altera 16550 FIFO32",
> + .fifo_size = 32,
> + .tx_loadsz = 32,
> + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
> + .flags = UART_CAP_FIFO | UART_CAP_AFE,
> + },
> + [PORT_ALTR_16550_F64] = {
> + .name = "Altera 16550 FIFO64",
> + .fifo_size = 64,
> + .tx_loadsz = 64,
> + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
> + .flags = UART_CAP_FIFO | UART_CAP_AFE,
> + },
> + [PORT_ALTR_16550_F128] = {
> + .name = "Altera 16550 FIFO128",
> + .fifo_size = 128,
> + .tx_loadsz = 128,
> + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
> + .flags = UART_CAP_FIFO | UART_CAP_AFE,
> + },
Adding three new types for what are basically the same UART, just with
different fifosizes, feels a bit silly to me, so in the future the
fifosize should be delivered as DT property. The following patches
fill uart_port.fifosize with the value from the property. I can see
the fifosize property is already used with some uarts, at least under
arch/arm/boot/dts/, but I guess not for of_serial.c driver.
Maybe there should also be DT property for auto flow control. It seems
to be quite common feature. Then in this case the type could just be
PORT_16550A.
--
heikki
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
