Hi Heikki
Le 15/03/2013 13:56, Heikki Krogerus a écrit :
>> @@ -137,8 +140,15 @@ static int dw8250_probe_of(struct uart_port *p)
>> p->regshift = val;
>>
>> if (of_property_read_u32(np, "clock-frequency", &val)) {
>> - dev_err(p->dev, "no clock-frequency property set\n");
>> - return -EINVAL;
>> + /* Get clk rate through clk driver if present */
>> + data->clk = clk_get(p->dev, NULL);
>> + if (IS_ERR(data->clk)) {
>> + dev_err(p->dev, "clk or clock-frequency not defined\n");
>> + return -EINVAL;
>> + }
>> +
>> + clk_prepare_enable(data->clk);
>> + val = clk_get_rate(data->clk);
>
> Don't get the clk here..
>
>> }
>> p->uartclk = val;
>>
>> @@ -300,6 +310,12 @@ static int dw8250_probe(struct platform_device *pdev)
>
> Get it here so it is then handled for also others besides DT users.
> And prefer devm_clk_get(). Something like this:
>
> ...
> uart.port.membase = ioremap(regs->start, resource_size(regs));
> if (!uart.port.membase)
> return -ENOMEM;
>
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + clk_prepare_enable(data->clk);
> +
> uart.port.iotype = UPIO_MEM;
> uart.port.serial_in = dw8250_serial_in;
> uart.port.serial_out = dw8250_serial_out;
> + uart.port.private_data = data;
> + uart.port.uartclk = clk_get_rate(data->clk);
>
> dw8250_setup_port(&uart);
> ...
>
> Then in dw8250_probe_of() you need to use the "clock-frequency"
> property only when p->uartclk is 0.
Thanks for your feedback.
Emilio made a new version of this patch, I'll send it soon.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
