ICP DAS LP-8x4x is an industrial data acquision device. It is based
on PXA270 CPU. The board containsi a lot of (up to 36) standard UARTi
8250i serial ports. System console on the board is provided with
an on-chip PXA serial port. Both modules use /dev/ttyS0 by default.
To solve the collision, PXA ports could be configured with different
name and device numbers.
Signed-off-by: Sergey Yanovich <ynvich@xxxxxxxxx>
---
drivers/tty/serial/Kconfig | 14 ++++++++++++++
drivers/tty/serial/pxa.c | 22 ++++++++++++++++++----
2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 59c23d0..09cf980 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -406,6 +406,20 @@ config SERIAL_PXA_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_PXA_TTYSA_NAME
+ bool "as /dev/ttySA[0-3]"
+ depends on SERIAL_PXA
+ default N
+ help
+ If you have enabled the serial port on the Intel XScale PXA
+ CPU you can make it appear as /dev/ttySA[0-3] in the system.
+
+ If you say N here (default), the ports will use UART /dev/ttyS[0-3]
+ names and corresponding major and minor devices numbers.
+
+ If you say Y here, the ports will have SA-1100 style names and
+ numbers. It is reqired at least for one PXA based device.
+
config SERIAL_SA1100
bool "SA1100 serial port support"
depends on ARCH_SA1100
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 2764828..a7e5e40 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -619,6 +619,20 @@ serial_pxa_type(struct uart_port *port)
static struct uart_pxa_port *serial_pxa_ports[4];
static struct uart_driver serial_pxa_reg;
+#ifndef CONFIG_SERIAL_PXA_TTYSA_NAME
+
+#define PXA_TTY_NAME "ttyS"
+#define PXA_TTY_MAJOR TTY_MAJOR
+#define PXA_TTY_MINOR 64
+
+#else
+
+#define PXA_TTY_NAME "ttySA"
+#define PXA_TTY_MAJOR 204
+#define PXA_TTY_MINOR 5
+
+#endif
+
#ifdef CONFIG_SERIAL_PXA_CONSOLE
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -778,7 +792,7 @@ serial_pxa_console_setup(struct console *co, char *options)
}
static struct console serial_pxa_console = {
- .name = "ttyS",
+ .name = PXA_TTY_NAME,
.write = serial_pxa_console_write,
.device = uart_console_device,
.setup = serial_pxa_console_setup,
@@ -819,9 +833,9 @@ struct uart_ops serial_pxa_pops = {
static struct uart_driver serial_pxa_reg = {
.owner = THIS_MODULE,
.driver_name = "PXA serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
+ .dev_name = PXA_TTY_NAME
+ .major = PXA_TTY_MAJOR,
+ .minor = PXA_TTY_MINOR,
.nr = 4,
.cons = PXA_CONSOLE,
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
