Hi All,
We've had a report [1] in Fedora that the nr_uarts parameter on the 8250
serial driver is no longer working. Our config hasn't changed in this
area in quite a while, and dmesg clearly shows setting 8250.nr_uarts=16
on the kernel command line results in:
[ 0.345459] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
whereas if you boot a 3.7 kernel with the same setting it prints out the
default value of 4 for ports. Fedora builds 8250 into the kernel and
not as a module, but the option is still clearly parsed in that case for
3.6.
I've looked through the commits from 3.6..3.7 in the 8250 driver and the
only one that seems relevant at all is
commit 835d844d1a28efba81d5aca7385e24c29d3a6db2
Author: Sean Young <sean@xxxxxxxx>
Date: Fri Sep 7 19:06:23 2012 +0100
8250_pnp: do pnp probe before legacy probe
but that is simply moving code around.
I ran the same test on a 3.9-rc1 kernel and it isn't being picked up
there either. Before I go off and do a bisect to track this down, has
anyone else seen or heard of this no longer working?
josh
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
