This patch performs a small cleanup tty/Serial/Kconfig file by removing
unneeded ARCH dependencies. This dependencies already included in
board/type symbols.
Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx>
---
drivers/tty/serial/Kconfig | 24 ++++++++++++------------
1 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b176801..500f043 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -93,7 +93,7 @@ config SERIAL_SB1250_DUART_CONSOLE
config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
- depends on (ARM && ARCH_AT91) || AVR32
+ depends on ARCH_AT91 || AVR32
select SERIAL_CORE
help
This enables the driver for the on-chip UARTs of the Atmel
@@ -198,7 +198,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -208,14 +208,14 @@ config SERIAL_SAMSUNG
config SERIAL_SAMSUNG_UARTS_4
bool
- depends on ARM && PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG
default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
- depends on ARM && PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG
default 6 if ARCH_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
@@ -249,7 +249,7 @@ config SERIAL_SAMSUNG_CONSOLE
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
- depends on ARM && ARCH_PRIMA2
+ depends on ARCH_PRIMA2
select SERIAL_CORE
help
Support for the on-chip UART on the CSR SiRFprimaII series,
@@ -347,7 +347,7 @@ config SERIAL_ZS_CONSOLE
config SERIAL_21285
tristate "DC21285 serial port support"
- depends on ARM && FOOTBRIDGE
+ depends on FOOTBRIDGE
select SERIAL_CORE
help
If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
@@ -371,7 +371,7 @@ config SERIAL_21285_CONSOLE
config SERIAL_MPSC
bool "Marvell MPSC serial port support"
- depends on PPC32 && MV64X60
+ depends on MV64X60
select SERIAL_CORE
help
Say Y here if you want to use the Marvell MPSC serial controller.
@@ -408,7 +408,7 @@ config SERIAL_PXA_CONSOLE
config SERIAL_SA1100
bool "SA1100 serial port support"
- depends on ARM && ARCH_SA1100
+ depends on ARCH_SA1100
select SERIAL_CORE
help
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
@@ -716,7 +716,7 @@ config SERIAL_SH_SCI_DMA
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
- depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
+ depends on SOC_PNX8550 || SOC_PNX833X
select SERIAL_CORE
help
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
@@ -1013,7 +1013,7 @@ config SERIAL_SGI_IOC3
config SERIAL_MSM
bool "MSM on-chip serial port support"
- depends on ARM && ARCH_MSM
+ depends on ARCH_MSM
select SERIAL_CORE
config SERIAL_MSM_CONSOLE
@@ -1035,7 +1035,7 @@ config SERIAL_MSM_HS
config SERIAL_VT8500
bool "VIA VT8500 on-chip serial port support"
- depends on ARM && ARCH_VT8500
+ depends on ARCH_VT8500
select SERIAL_CORE
config SERIAL_VT8500_CONSOLE
@@ -1045,7 +1045,7 @@ config SERIAL_VT8500_CONSOLE
config SERIAL_NETX
tristate "NetX serial port support"
- depends on ARM && ARCH_NETX
+ depends on ARCH_NETX
select SERIAL_CORE
help
If you have a machine based on a Hilscher NetX SoC you
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
