From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Allow device tree probing.
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxx>
Cc: <linux-serial@xxxxxxxxxxxxxxx>
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Signed-off-by: Subodh Nijsure <snijsure@xxxxxxxxxxxx>
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
.../bindings/tty/serial/fsl-mxs-auart.txt | 27 +++++++++++++
drivers/tty/serial/mxs-auart.c | 42 +++++++++++++++++++-
2 files changed, 67 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
new file mode 100644
index 0000000..2ee903f
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+ imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
+};
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec56d83..2e341b8 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
#include <asm/cacheflush.h>
@@ -675,6 +676,30 @@ static struct uart_driver auart_driver = {
#endif
};
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np)
+ /* no device tree device */
+ return 1;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+ return ret;
+ }
+ s->port.line = ret;
+
+ return 0;
+}
+
static int __devinit mxs_auart_probe(struct platform_device *pdev)
{
struct mxs_auart_port *s;
@@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
goto out;
}
+ ret = serial_mxs_probe_dt(s, pdev);
+ if (ret > 0)
+ s->port.line = pdev->id < 0 ? 0 : pdev->id;
+ else if (ret < 0)
+ goto out_free;
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
@@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
- s->port.line = pdev->id < 0 ? 0 : pdev->id;
s->port.fifosize = 16;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
@@ -728,7 +758,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, s);
- auart_port[pdev->id] = s;
+ auart_port[s->port.line] = s;
mxs_auart_reset(&s->port);
@@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
return 0;
}
+static struct of_device_id mxs_auart_dt_ids[] = {
+ { .compatible = "fsl,imx23-auart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = __devexit_p(mxs_auart_remove),
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
+ .of_match_table = mxs_auart_dt_ids,
},
};
@@ -807,3 +844,4 @@ module_init(mxs_auart_init);
module_exit(mxs_auart_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Freescale MXS application uart driver");
+MODULE_ALIAS("platform:mxs-auart");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
