Tested on a custom MPC5200B-board using some fancy industrial protocol.
Verified that MPC512x has identical bits, so should work there as well.
Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
Cc: Anatolij Gustschin <agust@xxxxxxx>
Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/mpc52xx_uart.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index bedac0d..f19d04e 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -775,11 +775,15 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
}
if (new->c_cflag & PARENB) {
+ if (new->c_cflag & CMSPAR)
+ mr1 |= MPC52xx_PSC_MODE_PARFORCE;
+
+ /* With CMSPAR, PARODD also means high parity (same as termios) */
mr1 |= (new->c_cflag & PARODD) ?
MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
- } else
+ } else {
mr1 |= MPC52xx_PSC_MODE_PARNONE;
-
+ }
mr2 = 0;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
