From: Tomoya MORINAGA <tomoya-linux@xxxxxxxxxxxxxxx>
Currently, auto-flow control setting processing is not set correctly.
This patch fixes the issue.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/tty/serial/pch_uart.c | 19 +++++++++++++------
1 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 1898861..0c95051 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -218,6 +218,7 @@ struct eg20t_port {
struct pch_uart_buffer rxbuf;
unsigned int dmsr;
unsigned int fcr;
+ unsigned int mcr;
unsigned int use_dma;
unsigned int use_dma_flag;
struct dma_async_tx_descriptor *desc_tx;
@@ -1007,7 +1008,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port)
static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
u32 mcr = 0;
- unsigned int dat;
struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
if (mctrl & TIOCM_DTR)
@@ -1017,11 +1017,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
- if (mctrl) {
- dat = pch_uart_get_mctrl(port);
- dat |= mcr;
- iowrite8(dat, priv->membase + UART_MCR);
- }
+ if (priv->mcr & UART_MCR_AFE)
+ mcr |= UART_MCR_AFE;
+
+ if (mctrl)
+ iowrite8(mcr, priv->membase + UART_MCR);
}
static void pch_uart_stop_tx(struct uart_port *port)
@@ -1215,6 +1215,13 @@ static void pch_uart_set_termios(struct uart_port *port,
} else {
parity = PCH_UART_HAL_PARITY_NONE;
}
+
+ /* Only UART0 has auto hardware flow function */
+ if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
+ priv->mcr |= UART_MCR_AFE;
+ else
+ priv->mcr &= ~UART_MCR_AFE;
+
termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
