As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
amiserial
nozomi
synclink
rocket
cyclades
moxa
mxser
isicom
bfin_jtag_comm
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/char/Kconfig | 172 --------------------------------
drivers/char/Makefile | 11 --
drivers/tty/Kconfig | 171 +++++++++++++++++++++++++++++++
drivers/tty/Makefile | 13 +++
drivers/{char => tty}/amiserial.c | 0
drivers/{char => tty}/bfin_jtag_comm.c | 0
drivers/{char => tty}/cyclades.c | 0
drivers/{char => tty}/isicom.c | 0
drivers/{char => tty}/moxa.c | 0
drivers/{char => tty}/moxa.h | 0
drivers/{char => tty}/mxser.c | 0
drivers/{char => tty}/mxser.h | 0
drivers/{char => tty}/nozomi.c | 0
drivers/{char => tty}/rocket.c | 0
drivers/{char => tty}/rocket.h | 0
drivers/{char => tty}/rocket_int.h | 0
drivers/{char => tty}/synclink.c | 0
drivers/{char => tty}/synclink_gt.c | 0
drivers/{char => tty}/synclinkmp.c | 0
19 files changed, 184 insertions(+), 183 deletions(-)
rename drivers/{char => tty}/amiserial.c (100%)
rename drivers/{char => tty}/bfin_jtag_comm.c (100%)
rename drivers/{char => tty}/cyclades.c (100%)
rename drivers/{char => tty}/isicom.c (100%)
rename drivers/{char => tty}/moxa.c (100%)
rename drivers/{char => tty}/moxa.h (100%)
rename drivers/{char => tty}/mxser.c (100%)
rename drivers/{char => tty}/mxser.h (100%)
rename drivers/{char => tty}/nozomi.c (100%)
rename drivers/{char => tty}/rocket.c (100%)
rename drivers/{char => tty}/rocket.h (100%)
rename drivers/{char => tty}/rocket_int.h (100%)
rename drivers/{char => tty}/synclink.c (100%)
rename drivers/{char => tty}/synclink_gt.c (100%)
rename drivers/{char => tty}/synclinkmp.c (100%)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 9b9ab86..1adfac6 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -15,36 +15,6 @@ config DEVKMEM
kind of kernel debugging operations.
When in doubt, say "N".
-config BFIN_JTAG_COMM
- tristate "Blackfin JTAG Communication"
- depends on BLACKFIN
- help
- Add support for emulating a TTY device over the Blackfin JTAG.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
- bool "Console on Blackfin JTAG"
- depends on BFIN_JTAG_COMM=y
-
-config SERIAL_NONSTANDARD
- bool "Non-standard serial port support"
- depends on HAS_IOMEM
- ---help---
- Say Y here if you have any non-standard serial boards -- boards
- which aren't supported using the standard "dumb" serial driver.
- This includes intelligent serial boards such as Cyclades,
- Digiboards, etc. These are usually used for systems that need many
- serial ports because they serve many terminals or dial-in
- connections.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about non-standard serial boards.
-
- Most people can say N here.
-
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -60,50 +30,6 @@ config COMPUTONE
To compile this driver as module, choose M here: the
module will be called ip2.
-config ROCKETPORT
- tristate "Comtrol RocketPort support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- help
- This driver supports Comtrol RocketPort and RocketModem PCI boards.
- These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
- modems. For information about the RocketPort/RocketModem boards
- and this driver read <file:Documentation/serial/rocket.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called rocket.
-
- If you want to compile this driver into the kernel, say Y here. If
- you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
- tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD && (PCI || ISA)
- select FW_LOADER
- ---help---
- This driver supports Cyclades Z and Y multiserial boards.
- You would need something like this to connect more than two modems to
- your Linux box, for instance in order to become a dial-in server.
-
- For information about the Cyclades-Z card, read
- <file:Documentation/serial/README.cycladesZ>.
-
- To compile this driver as a module, choose M here: the
- module will be called cyclades.
-
- If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
- bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
- depends on EXPERIMENTAL && CYCLADES
- help
- The Cyclades-Z family of multiport cards allows 2 (two) driver op
- modes: polling and interrupt. In polling mode, the driver will check
- the status of the Cyclades-Z ports every certain amount of time
- (which is called polling cycle and is configurable). In interrupt
- mode, it will use an interrupt line (IRQ) in order to check the
- status of the Cyclades-Z ports. The default op mode is polling. If
- unsure, say N.
-
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -119,94 +45,6 @@ config DIGIEPCA
To compile this driver as a module, choose M here: the
module will be called epca.
-config MOXA_INTELLIO
- tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- select FW_LOADER
- help
- Say Y here if you have a Moxa Intellio multiport serial card.
-
- To compile this driver as a module, choose M here: the
- module will be called moxa.
-
-config MOXA_SMARTIO
- tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
- help
- Say Y here if you have a Moxa SmartIO multiport serial card and/or
- want to help develop a new version of this driver.
-
- This is upgraded (1.9.1) driver from original Moxa drivers with
- changes finally resulting in PCI probing.
-
- This driver can also be built as a module. The module will be called
- mxser. If you want to do that, say M here.
-
-config ISI
- tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD && PCI
- select FW_LOADER
- help
- This is a driver for the Multi-Tech cards which provide several
- serial ports. The driver is experimental and can currently only be
- built as a module. The module will be called isicom.
- If you want to do that, choose M here.
-
-config SYNCLINK
- tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
- help
- Provides support for the SyncLink ISA and PCI multiprotocol serial
- adapters. These adapters support asynchronous and HDLC bit
- synchronous communication up to 10Mbps (PCI adapter).
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclink. If you want to do that, say M
- here.
-
-config SYNCLINKMP
- tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Enable support for the SyncLink Multiport (2 or 4 ports)
- serial adapter, running asynchronous and HDLC communications up
- to 2.048Mbps. Each ports is independently selectable for
- RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclinkmp. If you want to do that, say M
- here.
-
-config SYNCLINK_GT
- tristate "SyncLink GT/AC support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Support for SyncLink GT and SyncLink AC families of
- synchronous and asynchronous serial adapters
- manufactured by Microgate Systems, Ltd. (www.microgate.com)
-
-config N_HDLC
- tristate "HDLC line discipline support"
- depends on SERIAL_NONSTANDARD
- help
- Allows synchronous HDLC communications with tty device drivers that
- support synchronous HDLC such as the Microgate SyncLink adapter.
-
- This driver can be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called n_hdlc. If you want to do that, say M
- here.
-
-config N_GSM
- tristate "GSM MUX line discipline support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- depends on NET
- help
- This line discipline provides support for the GSM MUX protocol and
- presents the mux as a set of 61 individual tty devices.
-
config RISCOM8
tristate "SDL RISCom/8 card support"
depends on SERIAL_NONSTANDARD
@@ -296,16 +134,6 @@ config ISTALLION
To compile this driver as a module, choose M here: the
module will be called istallion.
-config NOZOMI
- tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
- depends on PCI && EXPERIMENTAL
- help
- If you have a HSDPA driver Broadband Wireless Data Card -
- Globe Trotter PCMCIA card, say Y here.
-
- To compile this driver as a module, choose M here, the module
- will be called nozomi.
-
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 5bc765d..f5dc7c9 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -5,29 +5,18 @@
obj-y += mem.o random.o
obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
-obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_ROCKETPORT) += rocket.o
obj-$(CONFIG_SERIAL167) += serial167.o
-obj-$(CONFIG_CYCLADES) += cyclades.o
obj-$(CONFIG_STALLION) += stallion.o
obj-$(CONFIG_ISTALLION) += istallion.o
-obj-$(CONFIG_NOZOMI) += nozomi.o
obj-$(CONFIG_DIGIEPCA) += epca.o
obj-$(CONFIG_SPECIALIX) += specialix.o
-obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
-obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
obj-$(CONFIG_COMPUTONE) += ip2/
obj-$(CONFIG_RISCOM8) += riscom8.o
-obj-$(CONFIG_ISI) += isicom.o
-obj-$(CONFIG_SYNCLINK) += synclink.o
-obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
-obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
-obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
obj-$(CONFIG_SX) += sx.o generic_serial.o
obj-$(CONFIG_RIO) += rio/ generic_serial.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 9cfbdb3..3fd7199 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -147,4 +147,175 @@ config LEGACY_PTY_COUNT
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
+config BFIN_JTAG_COMM
+ tristate "Blackfin JTAG Communication"
+ depends on BLACKFIN
+ help
+ Add support for emulating a TTY device over the Blackfin JTAG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+ bool "Console on Blackfin JTAG"
+ depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ depends on HAS_IOMEM
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/serial/rocket.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:Documentation/serial/README.cycladesZ>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CYCLADES
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ This driver can also be built as a module. The module will be called
+ mxser. If you want to do that, say M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config NOZOMI
+ tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you have a HSDPA driver Broadband Wireless Data Card -
+ Globe Trotter PCMCIA card, say Y here.
+
+ To compile this driver as a module, choose M here, the module
+ will be called nozomi.
+
+config ISI
+ tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && PCI
+ select FW_LOADER
+ help
+ This is a driver for the Multi-Tech cards which provide several
+ serial ports. The driver is experimental and can currently only be
+ built as a module. The module will be called isicom.
+ If you want to do that, choose M here.
+
+config N_HDLC
+ tristate "HDLC line discipline support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Allows synchronous HDLC communications with tty device drivers that
+ support synchronous HDLC such as the Microgate SyncLink adapter.
+
+ This driver can be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called n_hdlc. If you want to do that, say M
+ here.
+
+config N_GSM
+ tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on NET
+ help
+ This line discipline provides support for the GSM MUX protocol and
+ presents the mux as a set of 61 individual tty devices.
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 3962772..e549da3 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -11,3 +11,16 @@ obj-$(CONFIG_R3964) += n_r3964.o
obj-y += vt/
obj-$(CONFIG_HVC_DRIVER) += hvc/
obj-y += serial/
+
+# tty drivers
+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
+obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
+obj-$(CONFIG_CYCLADES) += cyclades.o
+obj-$(CONFIG_ISI) += isicom.o
+obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
+obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
+obj-$(CONFIG_NOZOMI) += nozomi.o
+obj-$(CONFIG_ROCKETPORT) += rocket.o
+obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
+obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
+obj-$(CONFIG_SYNCLINK) += synclink.o
diff --git a/drivers/char/amiserial.c b/drivers/tty/amiserial.c
similarity index 100%
rename from drivers/char/amiserial.c
rename to drivers/tty/amiserial.c
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
similarity index 100%
rename from drivers/char/bfin_jtag_comm.c
rename to drivers/tty/bfin_jtag_comm.c
diff --git a/drivers/char/cyclades.c b/drivers/tty/cyclades.c
similarity index 100%
rename from drivers/char/cyclades.c
rename to drivers/tty/cyclades.c
diff --git a/drivers/char/isicom.c b/drivers/tty/isicom.c
similarity index 100%
rename from drivers/char/isicom.c
rename to drivers/tty/isicom.c
diff --git a/drivers/char/moxa.c b/drivers/tty/moxa.c
similarity index 100%
rename from drivers/char/moxa.c
rename to drivers/tty/moxa.c
diff --git a/drivers/char/moxa.h b/drivers/tty/moxa.h
similarity index 100%
rename from drivers/char/moxa.h
rename to drivers/tty/moxa.h
diff --git a/drivers/char/mxser.c b/drivers/tty/mxser.c
similarity index 100%
rename from drivers/char/mxser.c
rename to drivers/tty/mxser.c
diff --git a/drivers/char/mxser.h b/drivers/tty/mxser.h
similarity index 100%
rename from drivers/char/mxser.h
rename to drivers/tty/mxser.h
diff --git a/drivers/char/nozomi.c b/drivers/tty/nozomi.c
similarity index 100%
rename from drivers/char/nozomi.c
rename to drivers/tty/nozomi.c
diff --git a/drivers/char/rocket.c b/drivers/tty/rocket.c
similarity index 100%
rename from drivers/char/rocket.c
rename to drivers/tty/rocket.c
diff --git a/drivers/char/rocket.h b/drivers/tty/rocket.h
similarity index 100%
rename from drivers/char/rocket.h
rename to drivers/tty/rocket.h
diff --git a/drivers/char/rocket_int.h b/drivers/tty/rocket_int.h
similarity index 100%
rename from drivers/char/rocket_int.h
rename to drivers/tty/rocket_int.h
diff --git a/drivers/char/synclink.c b/drivers/tty/synclink.c
similarity index 100%
rename from drivers/char/synclink.c
rename to drivers/tty/synclink.c
diff --git a/drivers/char/synclink_gt.c b/drivers/tty/synclink_gt.c
similarity index 100%
rename from drivers/char/synclink_gt.c
rename to drivers/tty/synclink_gt.c
diff --git a/drivers/char/synclinkmp.c b/drivers/tty/synclinkmp.c
similarity index 100%
rename from drivers/char/synclinkmp.c
rename to drivers/tty/synclinkmp.c
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
