On Fri, 19 Nov 2010 12:03:25 +0800 Greg KH <greg@xxxxxxxxx> wrote: > On Fri, Nov 19, 2010 at 11:01:48AM +0800, Feng Tang wrote: > > Previous baud rate setting code only has been tested with 3.5M/9600/ > > 115200/230400/460800 bps, and recently we got a 3M bps device to > > test, which needs to modify current MUL register setting, and with > > this patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a > > MUL value scale down from 3M's. > > > > Also got some reference register setting from silicon guys for > > different baud rates, which tries to keep the pre-scalar register > > value to 16. > > > > Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx> > > Wonderful, now that's a change log entry :) > > One final question, this should go into .37, right? Is it also > applicable for .36-stable and older? This patch should be in stable git too, but don't know if it could be applied to stable tree directly. Thanks, - Feng -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
