it works currently since Microblaze and Power are both BE.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
drivers/serial/of_serial.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 2af8fd1..012ef07 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -31,8 +31,8 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
{
struct resource resource;
struct device_node *np = ofdev->dev.of_node;
- const unsigned int *clk, *spd;
- const u32 *prop;
+ const __be32 *clk, *spd;
+ const __be32 *prop;
int ret, prop_size;
memset(port, 0, sizeof *port);
@@ -55,24 +55,24 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
/* Check for shifted address mapping */
prop = of_get_property(np, "reg-offset", &prop_size);
if (prop && (prop_size == sizeof(u32)))
- port->mapbase += *prop;
+ port->mapbase += be32_to_cpup(prop);
/* Check for registers offset within the devices address range */
prop = of_get_property(np, "reg-shift", &prop_size);
if (prop && (prop_size == sizeof(u32)))
- port->regshift = *prop;
+ port->regshift = be32_to_cpup(prop);
port->irq = irq_of_parse_and_map(np, 0);
port->iotype = UPIO_MEM;
port->type = type;
- port->uartclk = *clk;
+ port->uartclk = be32_to_cpup(clk);
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->dev = &ofdev->dev;
/* If current-speed was set, then try not to change it. */
if (spd)
- port->custom_divisor = *clk / (16 * (*spd));
-
+ port->custom_divisor = be32_to_cpup(clk) /
+ (16 * (be32_to_cpup(spd)));
return 0;
}
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
