From: Graf Yang <graf.yang@xxxxxxxxxx>
We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework
to monitor the TX status.
Signed-off-by: Graf Yang <graf.yang@xxxxxxxxxx>
Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
---
.../mach-bf527/include/mach/bfin_serial_5xx.h | 3 +++
.../mach-bf533/include/mach/bfin_serial_5xx.h | 2 ++
.../mach-bf537/include/mach/bfin_serial_5xx.h | 3 +++
.../mach-bf548/include/mach/bfin_serial_5xx.h | 3 +++
.../mach-bf561/include/mach/bfin_serial_5xx.h | 2 ++
drivers/serial/bfin_5xx.c | 4 ++++
6 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a23d047..75722d6 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 20471cd..815bfe5 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
# endif
#endif
+#define BFIN_UART_TX_FIFO_SIZE 2
+
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 08dfe30..b3f87e1 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 76976b1..e4cf35e 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -82,6 +82,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 6cddca4..e0ce0c1 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
# endif
#endif
+#define BFIN_UART_TX_FIFO_SIZE 2
+
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 5e20f50..a5cf0e7 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -761,6 +761,9 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
val |= UCEN;
UART_PUT_GCTL(uart, val);
+ /* Port speed changed, update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -865,6 +868,7 @@ static void __init bfin_serial_init_ports(void)
for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
+ bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
bfin_serial_ports[i].port.iotype = UPIO_MEM;
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
