I've upped the value of the following sctp and udp related parameters,
in the hope that this would help:
sysctl -w net.core.rmem_max=900000000
sysctl -w net.core.wmem_max=900000000
sysctl -w net.sctp.sctp_mem="2100000000 2100000000 2100000000"
sysctl -w net.sctp.sctp_rmem="2100000000 2100000000 2100000000"
sysctl -w net.sctp.sctp_wmem="2100000000 2100000000 2100000000"
sysctl -w net.ipv4.udp_mem="5000000000 5000000000 5000000000"
sysctl -w net.ipv4.udp_mem="10000000000 10000000000 10000000000"
However, I'm still seeing rapidly incrementing rx discards reported on the NIC:
:~# ethtool -S ens4f1 | egrep -i rx_discards
[0]: rx_discards: 6390805462
[1]: rx_discards: 6659315919
[2]: rx_discards: 6542570026
[3]: rx_discards: 6431513008
[4]: rx_discards: 6436779078
[5]: rx_discards: 6665897051
[6]: rx_discards: 6167985560
[7]: rx_discards: 11340068788
rx_discards: 56634934892
Despite the fact that I've set the NIC ring buffer on the Netextreme
interface to he maximum:
:~# ethtool -g ens4f0
Ring parameters for ens4f0:
Pre-set maximums:
RX: 4078
RX Mini: 0
RX Jumbo: 0
TX: 4078
Current hardware settings:
RX: 4078
RX Mini: 0
RX Jumbo: 0
TX: 4078
I see no ip errors at the physical interface:
ethtool -S ens4f0 | egrep phy_ip_err_discard| tail -1
rx_phy_ip_err_discards: 0
Could anyone suggest alternative approaches I might take to optimising
the system's handling of SCTP traffic?
On Sat, Oct 14, 2017 at 12:35 AM, David Laight <David.Laight@xxxxxxxxxx> wrote:
> From: Traiano Welcome
>> Sent: 13 October 2017 17:04
>> On Fri, Oct 13, 2017 at 11:56 PM, David Laight <David.Laight@xxxxxxxxxx> wrote:
>> > From: Traiano Welcome
>> >
>> > (copied to netdev)
>> >> Sent: 13 October 2017 07:16
>> >> To: linux-sctp@xxxxxxxxxxxxxxx
>> >> Subject: Kernel Performance Tuning for High Volume SCTP traffic
>> >>
>> >> Hi List
>> >>
>> >> I'm running a linux server processing high volumes of SCTP traffic and
>> >> am seeing large numbers of packet overruns (ifconfig output).
>> >
>> > I'd guess that overruns indicate that the ethernet MAC is failing to
>> > copy the receive frames into kernel memory.
>> > It is probably running out of receive buffers, but might be
>> > suffering from a lack of bus bandwidth.
>> > MAC drivers usually discard receive frames if they can't get
>> > a replacement buffer - so you shouldn't run out of rx buffers.
>> >
>> > This means the errors are probably below SCTP - so changing SCTP parameters
>> > is unlikely to help.
>>
>> Does this mean that tuning UDP performance could help ? Or do you mean
>> hardware (NIC) performance could be the issue?
>
> I'd certainly check UDP performance.
>
> David
>
--
To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
