----- Original Message ----- > From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx> > To: linux-scsi@xxxxxxxxxxxxxxx, kernel-janitors@xxxxxxxxxxxxxxx, "james smart" <james.smart@xxxxxxxxxxxxx>, "dick > kennedy" <dick.kennedy@xxxxxxxxxxxxx> > Sent: Sunday, September 25, 2016 11:58:41 AM > Subject: [PATCH] Fix few small typos in lpfc_scsi.c > > This patch does a cleanup and fixes few small typos in lpfc_scsi.c > > Signed-off-by: Milan P. Gandhi <mgandhi@xxxxxxxxxx> > --- > > drivers/scsi/lpfc/lpfc_scsi.c | 21 ++++++++++++--------- > 1 file changed, 12 insertions(+), 9 deletions(-) > > diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c > index d197aa1..ca56f28 100644 > --- a/drivers/scsi/lpfc/lpfc_scsi.c > +++ b/drivers/scsi/lpfc/lpfc_scsi.c > @@ -607,7 +607,7 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba, > } > > /** > - * lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a > list > + * lpfc_sli4_post_scsi_sgl_list - Post blocks of scsi buffer sgls from a > list > * @phba: pointer to lpfc hba data structure. > * @post_sblist: pointer to the scsi buffer list. > * > @@ -736,7 +736,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, > } > > /** > - * lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer > sgls > + * lpfc_sli4_repost_scsi_sgl_list - Repost all the allocated scsi buffer > sgls > * @phba: pointer to lpfc hba data structure. > * > * This routine walks the list of scsi buffers that have been allocated and > @@ -857,7 +857,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int > num_to_alloc) > psb->data, psb->dma_handle); > kfree(psb); > lpfc_printf_log(phba, KERN_ERR, LOG_FCP, > - "3368 Failed to allocated IOTAG for" > + "3368 Failed to allocate IOTAG for" > " XRI:0x%x\n", lxri); > lpfc_sli4_free_xri(phba, lxri); > break; > @@ -1136,7 +1136,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct > lpfc_scsi_buf *psb) > * > * This routine does the pci dma mapping for scatter-gather list of scsi > cmnd > * field of @lpfc_cmd for device with SLI-3 interface spec. This routine > scans > - * through sg elements and format the bdea. This routine also initializes > all > + * through sg elements and format the bde. This routine also initializes all > * IOCB fields which are dependent on scsi command request buffer. > * > * Return codes: > @@ -1269,13 +1269,16 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, > struct lpfc_scsi_buf *lpfc_cmd) > > #ifdef CONFIG_SCSI_LPFC_DEBUG_FS > > -/* Return if if error injection is detected by Initiator */ > +/* Return BG_ERR_INIT if error injection is detected by Initiator */ > #define BG_ERR_INIT 0x1 > -/* Return if if error injection is detected by Target */ > +/* Return BG_ERR_TGT if error injection is detected by Target */ > #define BG_ERR_TGT 0x2 > -/* Return if if swapping CSUM<-->CRC is required for error injection */ > +/* Return BG_ERR_SWAP if swapping CSUM<-->CRC is required for error > injection */ > #define BG_ERR_SWAP 0x10 > -/* Return if disabling Guard/Ref/App checking is required for error > injection */ > +/** > + * Return BG_ERR_CHECK if disabling Guard/Ref/App checking is required for > + * error injection > + **/ > #define BG_ERR_CHECK 0x20 > > /** > @@ -4822,7 +4825,7 @@ wait_for_cmpl: > ret = FAILED; > lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, > "0748 abort handler timed out waiting " > - "for abortng I/O (xri:x%x) to complete: " > + "for aborting I/O (xri:x%x) to complete: " > "ret %#x, ID %d, LUN %llu\n", > iocb->sli4_xritag, ret, > cmnd->device->id, cmnd->device->lun); > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Looks good to me Reviewed-by Laurence Oberman <loberman@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
