Re: [PATCH] qla2xxx: Fix NULL pointer deref in QLA interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bruno Prémont wrote on 30.06.2016 17:00:
> In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL
> pointer dereference when rsp->msix is NULL:
> […]
> The affected code was introduced by commit cdb898c52d1dfad4b4800b83a58b3fe5d352edde
> (qla2xxx: Add irq affinity notification).
> 
> Only dereference rsp->msix when it has been set so the machine can boot
> fine. Possibly rsp->msix is unset because:
> [    3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k.
> [    3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000.
> [    3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3).
> [    3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258.
> [    3.890145] scsi host0: qla2xxx
> [    3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA.
> [    3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496).
> [    5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps).

Bruno: Does that mean you actually tested that patch and it fixed the
problem for you? It looks like it, but there is some confusion about it;
that's one of the reasons why this patch didn't get any further yet
afaics, so a quick clarification might help to finally get this fixed
properly in mainline and stable.

Himanshu: While at it: Can you confirm this patch should get merged to
mainline? Seems Quinn is on PTO and his out-of-office reply mentioned
you as one point of contact.

Cheers, your regression tracker for Linux 4.7
 Thorsten

> CC: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
> ---
> diff --git a/drivers/scsi/qla2xxx/qla_isr.c
> b/drivers/scsi/qla2xxx/qla_isr.c index 5649c20..a92a62d 100644
> --- a/drivers/scsi/qla2xxx/qla_isr.c
> +++ b/drivers/scsi/qla2xxx/qla_isr.c
> @@ -2548,7 +2548,7 @@ void qla24xx_process_response_queue(struct
> scsi_qla_host *vha, if (!vha->flags.online)
>  		return;
>  
> -	if (rsp->msix->cpuid != smp_processor_id()) {
> +	if (rsp->msix && rsp->msix->cpuid != smp_processor_id()) {
>  		/* if kernel does not notify qla of IRQ's CPU change,
>  		 * then set it here.
>  		 */
> 
> http://news.gmane.org/find-root.php?message_id=20160630170032.6dbaf496%40pluto.restena.lu 
> http://mid.gmane.org/20160630170032.6dbaf496%40pluto.restena.lu
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux