Hey All,
New here. I need different backingstores / LUN's going to different
initiators. When creating a LUN under the luns section, it
automatically get's associated with any initiator created in the ACLS
list. But I need only specific single backing stores / LUN's associated
with single initiators in the ACLS list. How do I therefore structure
the create command using mapped_lun and tpg_lun to do so?
/qla2xxx/21:0...81:81:21/acls> cd 21:00:00:1b:32:00:83:b3
/qla2xxx/21:0...b:32:00:83:b3> create
Missing required parameters 'mapped_lun', 'tpg_lun'
/qla2xxx/21:0...b:32:00:83:b3> ls /
o- / ................................................ [...]
o- backstores ..................................... [...]
| o- fileio ....................................... [4 Storage Objects]
| | o- mdsesxip01-d01.img .................................... [2.0T,
/mnt/HTPCBackupXFS/san-luns-scst/mdsesxip01-d01.img, in use]
| | o- mdskvmp01-d01.img .................................. [2.0T,
/mnt/HTPCBackupXFS/san-luns-scst/mdskvmp01-d01.img, not in use]
| | o- mdskvmp02-d01.img .................................. [2.0T,
/mnt/HTPCBackupXFS/san-luns-scst/mdskvmp02-d01.img, not in use]
| | o- mdskvmp03-d01.img .................................. [2.0T,
/mnt/HTPCBackupXFS/san-luns-scst/mdskvmp03-d01.img, not in use]
| o- iblock ........................................ [0 Storage Object]
| o- pscsi ......................................... [0 Storage Object]
| o- rd_mcp ........................................ [0 Storage Object]
o- iscsi ........................................... [0 Targets]
o- loopback ........................................ [0 Targets]
o- qla2xxx ......................................... [1 Target]
| o- 21:00:00:1b:32:81:81:21 ....................... [enabled]
| o- acls ........................................ [4 ACLs]
| | o- 21:00:00:1b:32:00:83:b3 ................... [0 Mapped LUNs]
| | o- 21:03:00:1b:32:74:b6:cb ................... [0 Mapped LUNs]
| | o- 50:01:43:80:16:77:99:38 ................... [0 Mapped LUNs]
| | o- 50:01:43:80:16:77:99:70 ................... [0 Mapped LUNs]
| o- luns ........................................ [1 LUN]
| o- lun0 .. [fileio/mdsesxip01-d01.img
(/mnt/HTPCBackupXFS/san-luns-scst/mdsesxip01-d01.img)]
o- usb_gadget ...................................... [0 Targets]
/qla2xxx/21:0...b:32:00:83:b3>
I get the following on attempts that I make:
Missing required parameters 'mapped_lun', 'tpg_lun'
--
Cheers,
Tom K.
-------------------------------------------------------------------------------------
Mobile: 416 618 8456
Home: 905 857 9652
Living on earth is expensive, but it includes a free trip around the sun.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
