On 05/26/2016 04:38 AM, Mike Snitzer wrote:
On Thu, Apr 28 2016 at 11:40am -0400,
James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote:
On Thu, 2016-04-28 at 08:11 -0400, Mike Snitzer wrote:
Full disclosure: I'll be looking at reinstating bio-based DM multipath to
regain efficiencies that now really matter when issuing IO to extremely
fast devices (e.g. NVMe). bio cloning is now very cheap (due to
immutable biovecs), coupled with the emerging multipage biovec work that
will help construct larger bios, so I think it is worth pursuing to at
least keep our options open.
Please see the 4 topmost commits I've published here:
https://git.kernel.org/cgit/linux/kernel/git/device-mapper/linux-dm.git/log/?h=dm-4.8
All request-based DM multipath support/advances have been completly
preserved. I've just made it so that we can now have bio-based DM
multipath too.
All of the various modes have been tested using mptest:
https://github.com/snitm/mptest
OK, but remember the reason we moved from bio to request was partly to
be nearer to the device but also because at that time requests were
accumulations of bios which had to be broken out, go back up the stack
individually and be re-elevated, which adds to the inefficiency. In
theory the bio splitting work will mean that we only have one or two
split bios per request (because they were constructed from a split up
huge bio), but when we send them back to the top to be reconstructed as
requests there's no guarantee that the split will be correct a second
time around and we might end up resplitting the already split bios. If
you do reassembly into the huge bio again before resend down the next
queue, that's starting to look like quite a lot of work as well.
I've not even delved into the level you're laser-focused on here.
But I'm struggling to grasp why multipath is any different than any
other bio-based device...
Actually, _failover_ is not the primary concern. This is on a (relative)
slow path so any performance degradation during failover is acceptable.
No, the real issue is load-balancing.
If you have several paths you have to schedule I/O across all paths,
_and_ you should be feeding these paths efficiently.
With the original (bio-based) layout you had to schedule on the bio
level, causing the requests to be inefficiently assembled.
Hence the 'rr_min_io' parameter, which were changing paths after
rr_min_io _bios_. I did some experimenting a while back (I even had a
presentation on LSF at one point ...), and figuring that you would get a
performance degradation once the rr_min_io parameter went below 100.
But this means that paths will be switched after every 100 bios,
irrespective of into how many requests they'll be assembled.
It also means that we have a rather 'choppy' load-balancing behaviour,
and cannot achieve 'true' load balancing as the I/O scheduler on the bio
level doesn't have any idea when a new request will be assembled.
I was sort-of hoping that with the large bio work from Shaohua we could
build bio which would not require any merging, ie building bios which
would be assembled into a single request per bio.
Then the above problem wouldn't exist anymore and we _could_ do
scheduling on bio level.
But from what I've gathered this is not always possible (eg for btrfs
with delayed allocation).
Have you found another way of addressing this problem?
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@xxxxxxx +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
