Intermittently it is found that when multiple SATA
disks are directly connected to the host that some
disks are not detected.
The problem is that all set bitfields in ENT_INT_SRC1
are cleared for all phys in sata_int_v2_hw() - it
should clear the set bit for the phy being serviced.
Also unnecessary double-write to ENT_INT_SRC1 and
ENT_INT_SRC_MSK1 is removed (remaining writes are
done at end label).
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index f462fc4..5a7f709 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2003,12 +2003,10 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no);
ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1);
- ent_tmp = ent_int;
+ ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF * phy_no));
ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4);
if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) {
dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no);
- hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
- hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
res = IRQ_NONE;
goto end;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
