On Wed, Mar 23, 2016 at 09:49:26PM -0400, David Bond wrote:
>
> Some ethernet adapter vendors are supplying products which support optional
> (payed license) features. On some adapters this includes a hardware iscsi
> initiator. The same adapters in a normal (no extra licenses) mode of
> operation can be used as a software iscsi initiator. In addition, software
> iscsi boot initiators are becoming a standard part of many vendors uefi
> implementations. This is creating difficulties during early boot/install
> determining the proper configuration method for these adapters when they
> are used as a boot device.
>
> The attached patch creates sysfs entries to expose information from the
> acpi header of the ibft table. This information allows for a method to
> easily determining if an ibft table was created by a ethernet card's
> firmware or the system uefi/bios. In the case of a hardware initiator this
> information in combination with the pci vendor and device id can be used
> to ascertain any vendor specific behaviors that need to be accommodated.
Heya!
Is there an patch in iscsiadm for this as well? Or is this
>
> Reviewed-by: Lee Duncan <lduncan@xxxxxxxx>
> Signed-off-by: David Bond <dbond@xxxxxxxx>
> ---
> Documentation/ABI/testing/sysfs-ibft | 10 ++++++
> drivers/firmware/iscsi_ibft.c | 64 +++++++++++++++++++++++++++++++++++-
> drivers/scsi/iscsi_boot_sysfs.c | 62 ++++++++++++++++++++++++++++++++++
> include/linux/iscsi_boot_sysfs.h | 13 ++++++++
> 4 files changed, 148 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-ibft b/Documentation/ABI/testing/sysfs-ibft
> index cac3930..7d6725f 100644
> --- a/Documentation/ABI/testing/sysfs-ibft
> +++ b/Documentation/ABI/testing/sysfs-ibft
> @@ -21,3 +21,13 @@ Contact: Konrad Rzeszutek <ketuzsezr@xxxxxxxxxx>
> Description: The /sys/firmware/ibft/ethernetX directory will contain
> files that expose the iSCSI Boot Firmware Table NIC data.
> Usually this contains the IP address, MAC, and gateway of the NIC.
> +
> +What: /sys/firmware/ibft/acpi_header
> +Date: March 2016
> +Contact: David Bond <dbond@xxxxxxxx>
> +Description: The /sys/firmware/ibft/acpi_header directory will contain files
> + that expose the SIGNATURE, OEM_ID, and OEM_TABLE_ID fields of the
> + acpi table header of the iBFT structure. This will allow for
> + identification of the creator of the table which is useful in
> + determining quirks associated with some adapters when used in
> + hardware vs software iscsi initiator mode.
> diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
> index 81037e5..2b1900b 100644
> --- a/drivers/firmware/iscsi_ibft.c
> +++ b/drivers/firmware/iscsi_ibft.c
> @@ -418,6 +418,31 @@ static ssize_t ibft_attr_show_target(void *data, int type, char *buf)
> return str - buf;
> }
>
> +static ssize_t ibft_attr_show_acpitbl(void *data, int type, char *buf)
> +{
> + struct ibft_kobject *entry = data;
> + char *str = buf;
> +
> + switch (type) {
> + case ISCSI_BOOT_ACPITBL_SIGNATURE:
> + str += sprintf_string(str, ACPI_NAME_SIZE,
> + entry->header->header.signature);
> + break;
> + case ISCSI_BOOT_ACPITBL_OEM_ID:
> + str += sprintf_string(str, ACPI_OEM_ID_SIZE,
> + entry->header->header.oem_id);
> + break;
> + case ISCSI_BOOT_ACPITBL_OEM_TABLE_ID:
> + str += sprintf_string(str, ACPI_OEM_TABLE_ID_SIZE,
> + entry->header->header.oem_table_id);
> + break;
> + default:
> + break;
> + }
> +
> + return str - buf;
> +}
> +
> static int __init ibft_check_device(void)
> {
> int len;
> @@ -576,6 +601,24 @@ static umode_t __init ibft_check_initiator_for(void *data, int type)
> return rc;
> }
>
> +static umode_t __init ibft_check_acpitbl_for(void *data, int type)
> +{
> +
> + umode_t rc = 0;
> +
> + switch (type) {
> + case ISCSI_BOOT_ACPITBL_SIGNATURE:
> + case ISCSI_BOOT_ACPITBL_OEM_ID:
> + case ISCSI_BOOT_ACPITBL_OEM_TABLE_ID:
> + rc = S_IRUGO;
> + break;
> + default:
> + break;
> + }
> +
> + return rc;
> +}
> +
> static void ibft_kobj_release(void *data)
> {
> kfree(data);
> @@ -699,6 +742,8 @@ free_ibft_obj:
> static int __init ibft_register_kobjects(struct acpi_table_ibft *header)
> {
> struct ibft_control *control = NULL;
> + struct iscsi_boot_kobj *boot_kobj;
> + struct ibft_kobject *ibft_kobj;
> void *ptr, *end;
> int rc = 0;
> u16 offset;
> @@ -727,6 +772,23 @@ static int __init ibft_register_kobjects(struct acpi_table_ibft *header)
> }
> }
>
What about the rc earlier (from the loop)? You end up ignoring it.
Should we have:
if (rc)
return rc;
?
> + ibft_kobj = kzalloc(sizeof(*ibft_kobj), GFP_KERNEL);
> + if (!ibft_kobj)
> + return -ENOMEM;
> +
> + ibft_kobj->header = header;
> + ibft_kobj->hdr = NULL; /*for ibft_unregister*/
> +
> + boot_kobj = iscsi_boot_create_acpitbl(boot_kset, 0,
> + ibft_kobj,
> + ibft_attr_show_acpitbl,
> + ibft_check_acpitbl_for,
> + ibft_kobj_release);
There something off with the offset here, but I presume it is just the
tabs and them not showing up properly in my editor.
> + if (!boot_kobj) {
> + kfree(ibft_kobj);
> + rc = -ENOMEM;
> + }
> +
> return rc;
> }
>
> @@ -738,7 +800,7 @@ static void ibft_unregister(void)
> list_for_each_entry_safe(boot_kobj, tmp_kobj,
> &boot_kset->kobj_list, list) {
> ibft_kobj = boot_kobj->data;
> - if (ibft_kobj->hdr->id == id_nic)
> + if (ibft_kobj->hdr && ibft_kobj->hdr->id == id_nic)
> sysfs_remove_link(&boot_kobj->kobj, "device");
> };
> }
> diff --git a/drivers/scsi/iscsi_boot_sysfs.c b/drivers/scsi/iscsi_boot_sysfs.c
> index 8f0ea97..b472f56 100644
> --- a/drivers/scsi/iscsi_boot_sysfs.c
> +++ b/drivers/scsi/iscsi_boot_sysfs.c
> @@ -306,6 +306,42 @@ static struct attribute_group iscsi_boot_initiator_attr_group = {
> .is_visible = iscsi_boot_ini_attr_is_visible,
> };
>
> +/* iBFT ACPI Table attributes */
> +iscsi_boot_rd_attr(acpitbl_signature, signature, ISCSI_BOOT_ACPITBL_SIGNATURE);
> +iscsi_boot_rd_attr(acpitbl_oem_id, oem_id, ISCSI_BOOT_ACPITBL_OEM_ID);
> +iscsi_boot_rd_attr(acpitbl_oem_table_id, oem_table_id,
> + ISCSI_BOOT_ACPITBL_OEM_TABLE_ID);
> +
> +static struct attribute *acpitbl_attrs[] = {
> + &iscsi_boot_attr_acpitbl_signature.attr,
> + &iscsi_boot_attr_acpitbl_oem_id.attr,
> + &iscsi_boot_attr_acpitbl_oem_table_id.attr,
> + NULL
> +};
> +
> +static umode_t iscsi_boot_acpitbl_attr_is_visible(struct kobject *kobj,
> + struct attribute *attr, int i)
> +{
> + struct iscsi_boot_kobj *boot_kobj =
> + container_of(kobj, struct iscsi_boot_kobj, kobj);
> +
> + if (attr == &iscsi_boot_attr_acpitbl_signature.attr)
> + return boot_kobj->is_visible(boot_kobj->data,
> + ISCSI_BOOT_ACPITBL_SIGNATURE);
> + if (attr == &iscsi_boot_attr_acpitbl_oem_id.attr)
> + return boot_kobj->is_visible(boot_kobj->data,
> + ISCSI_BOOT_ACPITBL_OEM_ID);
> + if (attr == &iscsi_boot_attr_acpitbl_oem_table_id.attr)
> + return boot_kobj->is_visible(boot_kobj->data,
> + ISCSI_BOOT_ACPITBL_OEM_TABLE_ID);
> + return 0;
> +}
> +
> +static struct attribute_group iscsi_boot_acpitbl_attr_group = {
> + .attrs = acpitbl_attrs,
> + .is_visible = iscsi_boot_acpitbl_attr_is_visible,
> +};
> +
> static struct iscsi_boot_kobj *
> iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset,
> struct attribute_group *attr_group,
> @@ -436,6 +472,32 @@ iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
> EXPORT_SYMBOL_GPL(iscsi_boot_create_ethernet);
>
> /**
> + * iscsi_boot_create_acpitbl() - create boot acpi table sysfs dir
> + * @boot_kset: boot kset
> + * @index: not used
> + * @data: driver specific data
> + * @show: attr show function
> + * @is_visible: attr visibility function
> + * @release: release function
> + *
> + * Note: The boot sysfs lib will free the data passed in for the caller
> + * when all refs to the acpitbl kobject have been released.
> + */
> +struct iscsi_boot_kobj *
> +iscsi_boot_create_acpitbl(struct iscsi_boot_kset *boot_kset, int index,
> + void *data,
> + ssize_t (*show)(void *data, int type, char *buf),
> + umode_t (*is_visible)(void *data, int type),
> + void (*release)(void *data))
> +{
> + return iscsi_boot_create_kobj(boot_kset,
> + &iscsi_boot_acpitbl_attr_group,
> + "acpi_header", index, data, show,
> + is_visible, release);
> +}
> +EXPORT_SYMBOL_GPL(iscsi_boot_create_acpitbl);
> +
> +/**
> * iscsi_boot_create_kset() - creates root sysfs tree
> * @set_name: name of root dir
> */
> diff --git a/include/linux/iscsi_boot_sysfs.h b/include/linux/iscsi_boot_sysfs.h
> index 548d553..10923d7 100644
> --- a/include/linux/iscsi_boot_sysfs.h
> +++ b/include/linux/iscsi_boot_sysfs.h
> @@ -64,6 +64,12 @@ enum iscsi_boot_initiator_properties_enum {
> ISCSI_BOOT_INI_END_MARKER,
> };
>
> +enum iscsi_boot_acpitbl_properties_enum {
> + ISCSI_BOOT_ACPITBL_SIGNATURE,
> + ISCSI_BOOT_ACPITBL_OEM_ID,
> + ISCSI_BOOT_ACPITBL_OEM_TABLE_ID,
> +};
> +
> struct attribute_group;
>
> struct iscsi_boot_kobj {
> @@ -127,6 +133,13 @@ iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
> umode_t (*is_visible) (void *data, int type),
> void (*release) (void *data));
>
> +struct iscsi_boot_kobj *
> +iscsi_boot_create_acpitbl(struct iscsi_boot_kset *boot_kset, int index,
> + void *data,
> + ssize_t (*show)(void *data, int type, char *buf),
> + umode_t (*is_visible)(void *data, int type),
> + void (*release)(void *data));
> +
> struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name);
> struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno);
> void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset);
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
