On 03/29/16 07:42, Laurence Oberman wrote:
I have been using this jammer functionality to continue testing the SCSI F/C drivers and recovery for over a year now.
Any chance you would agree to ack this so I can get it in now.
I last posted to the list last March and it was not picked up.
I did look into moving this to upper layers but I find I use it primarily for fiber channel target testing.
Attempting to add this functionality to upper layers led to complexities and this is very solid.
This Patch diff against 4.5
I use target LIO for all my storage array test targets and customer problem resolution here at Red Hat.
This patch resulted from a requirement to mimic behavior of an expensive hardware jammer for a customer.
I have used this for some time with good success to simulate and reproduce latency and slow drain fabric issues and
for testing and validating error handling behavior
in the Emulex, Qlogic and other F/C drivers.
Works by checking new parameter jam_host if its >= 0 and matches vha->host_no , jamming is enabled when jam_host >=0
If parameter set to -1 (default) no jamming is enabled.
Hello Laurence,
Nic Bellinger is the maintainer of LIO so my recommendation is to ask
Nic first about his opinion (I have CC'd Nic). I'm not sure what Nic
thinks about this but in my opinion such functionality belongs in the
target core instead of in a target driver. But please wait until Nic has
provided his opinion before spending more time on this. The mailing list
for SCSI target patches is target-devel@xxxxxxxxxxxxxxx.
Bart.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
