Fix various issues: Comments about bus errors are incorrect. The
PDMA asm must return the size of the memory access that faulted so the
transfer count can be adjusted accordingly. A phase change may cause a
bus error but should not be treated as failure. A bus error does not
always imply a phase change and generally the transfer may continue.
Scatter/gather doesn't seem to work with PDMA due to overruns. This is
a pity because peak throughput seems to double with SG_ALL.
Tested on a Mac LC III and a PowerBook 520.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
---
Changed since v1:
- Set the default cmd_per_lun to 4 based on test results.
Changed since v2:
- Revert the default cmd_per_lun to 2, like in the v1 patch, because
a uniform default across all ten 5380 wrapper drivers is worth more
than a tiny improvement in one particular microbenchmark on one system.
- Add 'reviewed-by' tag.
---
drivers/scsi/NCR5380.h | 2
drivers/scsi/mac_scsi.c | 210 ++++++++++++++++++++++++++----------------------
2 files changed, 118 insertions(+), 94 deletions(-)
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-03-23 21:09:53.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-03-23 21:10:05.000000000 +1100
@@ -28,7 +28,8 @@
/* Definitions for the core NCR5380 driver. */
-#define NCR5380_implementation_fields unsigned char *pdma_base
+#define NCR5380_implementation_fields unsigned char *pdma_base; \
+ int pdma_residual
#define NCR5380_read(reg) macscsi_read(instance, reg)
#define NCR5380_write(reg, value) macscsi_write(instance, reg, value)
@@ -37,7 +38,7 @@
macscsi_dma_xfer_len(instance, cmd)
#define NCR5380_dma_recv_setup macscsi_pread
#define NCR5380_dma_send_setup macscsi_pwrite
-#define NCR5380_dma_residual(instance) (0)
+#define NCR5380_dma_residual(instance) (hostdata->pdma_residual)
#define NCR5380_intr macscsi_intr
#define NCR5380_queue_command macscsi_queue_command
@@ -104,18 +105,9 @@ static int __init mac_scsi_setup(char *s
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-/*
- Pseudo-DMA: (Ove Edlund)
- The code attempts to catch bus errors that occur if one for example
- "trips over the cable".
- XXX: Since bus errors in the PDMA routines never happen on my
- computer, the bus error code is untested.
- If the code works as intended, a bus error results in Pseudo-DMA
- being disabled, meaning that the driver switches to slow handshake.
- If bus errors are NOT extremely rare, this has to be changed.
-*/
+/* Pseudo DMA asm originally by Ove Edlund */
-#define CP_IO_TO_MEM(s,d,len) \
+#define CP_IO_TO_MEM(s,d,n) \
__asm__ __volatile__ \
(" cmp.w #4,%2\n" \
" bls 8f\n" \
@@ -152,61 +144,73 @@ __asm__ __volatile__ \
" 9: \n" \
".section .fixup,\"ax\"\n" \
" .even\n" \
- "90: moveq.l #1, %2\n" \
+ "91: moveq.l #1, %2\n" \
+ " jra 9b\n" \
+ "94: moveq.l #4, %2\n" \
" jra 9b\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 4\n" \
- " .long 1b,90b\n" \
- " .long 3b,90b\n" \
- " .long 31b,90b\n" \
- " .long 32b,90b\n" \
- " .long 33b,90b\n" \
- " .long 34b,90b\n" \
- " .long 35b,90b\n" \
- " .long 36b,90b\n" \
- " .long 37b,90b\n" \
- " .long 5b,90b\n" \
- " .long 7b,90b\n" \
+ " .long 1b,91b\n" \
+ " .long 3b,94b\n" \
+ " .long 31b,94b\n" \
+ " .long 32b,94b\n" \
+ " .long 33b,94b\n" \
+ " .long 34b,94b\n" \
+ " .long 35b,94b\n" \
+ " .long 36b,94b\n" \
+ " .long 37b,94b\n" \
+ " .long 5b,94b\n" \
+ " .long 7b,91b\n" \
".previous" \
- : "=a"(s), "=a"(d), "=d"(len) \
- : "0"(s), "1"(d), "2"(len) \
+ : "=a"(s), "=a"(d), "=d"(n) \
+ : "0"(s), "1"(d), "2"(n) \
: "d0")
static int macscsi_pread(struct Scsi_Host *instance,
unsigned char *dst, int len)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- unsigned char *d;
- unsigned char *s;
-
- s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
- d = dst;
-
- /* These conditions are derived from MacOS */
-
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
- !(NCR5380_read(STATUS_REG) & SR_REQ))
- ;
-
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
- (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
- pr_err("Error in macscsi_pread\n");
- return -1;
- }
-
- CP_IO_TO_MEM(s, d, len);
-
- if (len != 0) {
- pr_notice("Bus error in macscsi_pread\n");
- return -1;
+ unsigned char *s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
+ unsigned char *d = dst;
+ int n = len;
+ int transferred;
+
+ while (!NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+ BASR_DRQ | BASR_PHASE_MATCH,
+ BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
+ CP_IO_TO_MEM(s, d, n);
+
+ transferred = d - dst - n;
+ hostdata->pdma_residual = len - transferred;
+
+ /* No bus error. */
+ if (n == 0)
+ return 0;
+
+ /* Target changed phase early? */
+ if (NCR5380_poll_politely2(instance, STATUS_REG, SR_REQ, SR_REQ,
+ BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: !REQ and !ACK\n", __func__);
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
+ return 0;
+
+ dsprintk(NDEBUG_PSEUDO_DMA, instance,
+ "%s: bus error (%d/%d)\n", __func__, transferred, len);
+ NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
+ d = dst + transferred;
+ n = len - transferred;
}
- return 0;
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: phase mismatch or !DRQ\n", __func__);
+ NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
+ return -1;
}
-#define CP_MEM_TO_IO(s,d,len) \
+#define CP_MEM_TO_IO(s,d,n) \
__asm__ __volatile__ \
(" cmp.w #4,%2\n" \
" bls 8f\n" \
@@ -243,57 +247,76 @@ __asm__ __volatile__ \
" 9: \n" \
".section .fixup,\"ax\"\n" \
" .even\n" \
- "90: moveq.l #1, %2\n" \
+ "91: moveq.l #1, %2\n" \
+ " jra 9b\n" \
+ "94: moveq.l #4, %2\n" \
" jra 9b\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 4\n" \
- " .long 1b,90b\n" \
- " .long 3b,90b\n" \
- " .long 31b,90b\n" \
- " .long 32b,90b\n" \
- " .long 33b,90b\n" \
- " .long 34b,90b\n" \
- " .long 35b,90b\n" \
- " .long 36b,90b\n" \
- " .long 37b,90b\n" \
- " .long 5b,90b\n" \
- " .long 7b,90b\n" \
+ " .long 1b,91b\n" \
+ " .long 3b,94b\n" \
+ " .long 31b,94b\n" \
+ " .long 32b,94b\n" \
+ " .long 33b,94b\n" \
+ " .long 34b,94b\n" \
+ " .long 35b,94b\n" \
+ " .long 36b,94b\n" \
+ " .long 37b,94b\n" \
+ " .long 5b,94b\n" \
+ " .long 7b,91b\n" \
".previous" \
- : "=a"(s), "=a"(d), "=d"(len) \
- : "0"(s), "1"(d), "2"(len) \
+ : "=a"(s), "=a"(d), "=d"(n) \
+ : "0"(s), "1"(d), "2"(n) \
: "d0")
static int macscsi_pwrite(struct Scsi_Host *instance,
unsigned char *src, int len)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- unsigned char *s;
- unsigned char *d;
-
- s = src;
- d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
-
- /* These conditions are derived from MacOS */
-
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
- (!(NCR5380_read(STATUS_REG) & SR_REQ) ||
- (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
- ;
-
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
- pr_err("Error in macscsi_pwrite\n");
- return -1;
+ unsigned char *s = src;
+ unsigned char *d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
+ int n = len;
+ int transferred;
+
+ while (!NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+ BASR_DRQ | BASR_PHASE_MATCH,
+ BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
+ CP_MEM_TO_IO(s, d, n);
+
+ transferred = s - src - n;
+ hostdata->pdma_residual = len - transferred;
+
+ /* Target changed phase early? */
+ if (NCR5380_poll_politely2(instance, STATUS_REG, SR_REQ, SR_REQ,
+ BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: !REQ and !ACK\n", __func__);
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
+ return 0;
+
+ /* No bus error. */
+ if (n == 0) {
+ if (NCR5380_poll_politely(instance, TARGET_COMMAND_REG,
+ TCR_LAST_BYTE_SENT,
+ TCR_LAST_BYTE_SENT, HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: Last Byte Sent timeout\n", __func__);
+ return 0;
+ }
+
+ dsprintk(NDEBUG_PSEUDO_DMA, instance,
+ "%s: bus error (%d/%d)\n", __func__, transferred, len);
+ NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
+ s = src + transferred;
+ n = len - transferred;
}
- CP_MEM_TO_IO(s, d, len);
-
- if (len != 0) {
- pr_notice("Bus error in macscsi_pwrite\n");
- return -1;
- }
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: phase mismatch or !DRQ\n", __func__);
+ NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
- return 0;
+ return -1;
}
static int macscsi_dma_xfer_len(struct Scsi_Host *instance,
@@ -301,10 +324,11 @@ static int macscsi_dma_xfer_len(struct S
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
+ if (hostdata->flags & FLAG_NO_PSEUDO_DMA ||
+ cmd->SCp.this_residual < 16)
return 0;
- return cmd->transfersize;
+ return cmd->SCp.this_residual;
}
#include "NCR5380.c"
@@ -322,7 +346,7 @@ static struct scsi_host_template mac_scs
.eh_bus_reset_handler = macscsi_bus_reset,
.can_queue = 16,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = 1,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
@@ -358,8 +382,6 @@ static int __init mac_scsi_probe(struct
mac_scsi_template.sg_tablesize = setup_sg_tablesize;
if (setup_hostid >= 0)
mac_scsi_template.this_id = setup_hostid & 7;
- if (setup_use_pdma < 0)
- setup_use_pdma = 0;
instance = scsi_host_alloc(&mac_scsi_template,
sizeof(struct NCR5380_hostdata));
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-03-23 21:10:00.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-03-23 21:10:05.000000000 +1100
@@ -292,6 +292,8 @@ static void NCR5380_reselect(struct Scsi
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
+static int NCR5380_poll_politely(struct Scsi_Host *, int, int, int, int);
+static int NCR5380_poll_politely2(struct Scsi_Host *, int, int, int, int, int, int, int);
#endif /* __KERNEL__ */
#endif /* NCR5380_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
