On 03/15/2016 12:48 PM, Steffen Maier wrote:
> On 03/15/2016 12:28 PM, Hannes Reinecke wrote:
>> On 03/15/2016 12:03 PM, Steffen Maier wrote:
>>> On 03/15/2016 08:19 AM, Hannes Reinecke wrote:
>>>> On larger installations it is useful to disable automatic LUN
>>>> scanning, and only add the required LUNs via udev rules.
>>>> This can speed up bootup dramatically.
>>>>
>>>> This patch introduces a new scan module parameter value 'manual',
>>>> which works like 'none', but can be overriden by setting the
>>>> 'rescan'
>>>> value from scsi_scan_target to 'SCSI_SCAN_MANUAL'.
>>>> And it updates all relevant callers to set the 'rescan' value
>>>> to 'SCSI_SCAN_MANUAL' if invoked via the 'scan' option in sysfs.
>>>>
>>>> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
>
>>> In particular, the following might be necessary in order not to
>>> break zfcp manual LUN addition (as long as zfcp still has its own
>>> unit_add sysfs interface; completely replacing it with the solution
>>> here is not easy because it breaks the zfcp sysfs user interface):
>>>
>>>> void zfcp_unit_scsi_scan(struct zfcp_unit *unit)
>>>> {
>>>> struct fc_rport *rport = unit->port->rport;
>>>> u64 lun;
>>>>
>>>> lun = scsilun_to_int((struct scsi_lun *) &unit->fcp_lun);
>>>>
>>>> if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
>>>> - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
>>>> lun, 1);
>>>> + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
>>>> lun,
>>>> + SCSI_SCAN_MANUAL);
>>>> }
>
>> As for zfcp: it also relies on the 'user_scan' callback from
>> scsi_transport_fc, so it will fall under the same rules as any
>> 'normal' FC HBA.
>
> I'm not sure, since zfcp needs to continue to support HBA hardware
> virtualization without NPIV.
>
> The zfcp unit_add sysfs interface is kind of a peer of your common
> code scsi scan interface interface. I think, for zfcp users, a
> unit_add needs to be sufficient. It would be strange to additionally
> have them also write the same LUN into the Scsi_Host's scan sysfs
> attribute, i.e. having to double configure things.
>
Hmm. Good point. So yeah, if auto LUN scan is disabled we should be
overriding any setting from the 'scan' parameter.
Let's see if I can come up with a patch here.
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@xxxxxxx +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
