On 03/14/2016 05:27 AM, Finn Thain wrote:
> Standardize the DMA setup hooks so that the DMA implementation in
> atari_NCR5380.c can be reconciled with pseudo DMA implementation in
> NCR5380.c.
>
> Calls to NCR5380_dma_recv_setup() and NCR5380_dma_send_setup() return
> a negative value on failure, zero on PDMA transfer success and a positive
> byte count for DMA setup success.
>
> This convention is not entirely new, but is now applied consistently.
>
> Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
>
> ---
> drivers/scsi/NCR5380.c | 21 ++++++++++-----------
> drivers/scsi/arm/cumana_1.c | 10 ++++++++--
> drivers/scsi/arm/oak.c | 4 ++--
> drivers/scsi/atari_scsi.c | 3 ---
> 4 files changed, 20 insertions(+), 18 deletions(-)
>
> Index: linux/drivers/scsi/NCR5380.c
> ===================================================================
> --- linux.orig/drivers/scsi/NCR5380.c 2016-03-14 15:26:34.000000000 +1100
> +++ linux/drivers/scsi/NCR5380.c 2016-03-14 15:26:37.000000000 +1100
> @@ -1431,7 +1431,7 @@ static int NCR5380_transfer_dma(struct S
> register unsigned char p = *phase;
> register unsigned char *d = *data;
> unsigned char tmp;
> - int foo;
> + int result;
>
> if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
> *phase = tmp;
> @@ -1505,9 +1505,9 @@ static int NCR5380_transfer_dma(struct S
> */
>
> if (p & SR_IO) {
> - foo = NCR5380_dma_recv_setup(instance, d,
> + result = NCR5380_dma_recv_setup(instance, d,
> hostdata->flags & FLAG_DMA_FIXUP ? c - 1 : c);
> - if (!foo && (hostdata->flags & FLAG_DMA_FIXUP)) {
> + if (!result && (hostdata->flags & FLAG_DMA_FIXUP)) {
> /*
> * The workaround was to transfer fewer bytes than we
> * intended to with the pseudo-DMA read function, wait for
> @@ -1525,19 +1525,19 @@ static int NCR5380_transfer_dma(struct S
>
> if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
> BASR_DRQ, BASR_DRQ, HZ) < 0) {
> - foo = -1;
> + result = -1;
> shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n");
> }
> if (NCR5380_poll_politely(instance, STATUS_REG,
> SR_REQ, 0, HZ) < 0) {
> - foo = -1;
> + result = -1;
> shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
> }
> d[c - 1] = NCR5380_read(INPUT_DATA_REG);
> }
> } else {
> - foo = NCR5380_dma_send_setup(instance, d, c);
> - if (!foo && (hostdata->flags & FLAG_DMA_FIXUP)) {
> + result = NCR5380_dma_send_setup(instance, d, c);
> + if (!result && (hostdata->flags & FLAG_DMA_FIXUP)) {
> /*
> * Wait for the last byte to be sent. If REQ is being asserted for
> * the byte we're interested, we'll ACK it and it will go false.
> @@ -1545,7 +1545,7 @@ static int NCR5380_transfer_dma(struct S
> if (NCR5380_poll_politely2(instance,
> BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
> BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) {
> - foo = -1;
> + result = -1;
> shost_printk(KERN_ERR, instance, "PDMA write: DRQ and phase timeout\n");
> }
> }
> @@ -1555,8 +1555,7 @@ static int NCR5380_transfer_dma(struct S
> NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> *data = d + c;
> *count = 0;
> - *phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
> - return foo;
> + return result;
> }
>
> /*
Don't you miss a phase update here?
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@xxxxxxx +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
