[PATCH 16/22] ncr5380: Fix register decoding for debugging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Decode all bits in the chip registers. They are all useful at times.
Fix printk severity so that this output can be suppressed along with
the other debugging output.

Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>

---
 drivers/scsi/NCR5380.c |   42 +++++++++++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 17 deletions(-)

Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c	2016-03-14 15:26:48.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c	2016-03-14 15:26:50.000000000 +1100
@@ -256,12 +256,20 @@ static struct {
 	{0, NULL}
 },
 basrs[] = {
+	{BASR_END_DMA_TRANSFER, "END OF DMA"},
+	{BASR_DRQ, "DRQ"},
+	{BASR_PARITY_ERROR, "PARITY ERROR"},
+	{BASR_IRQ, "IRQ"},
+	{BASR_PHASE_MATCH, "PHASE MATCH"},
+	{BASR_BUSY_ERROR, "BUSY ERROR"},
 	{BASR_ATN, "ATN"},
 	{BASR_ACK, "ACK"},
 	{0, NULL}
 },
 icrs[] = {
 	{ICR_ASSERT_RST, "ASSERT RST"},
+	{ICR_ARBITRATION_PROGRESS, "ARB. IN PROGRESS"},
+	{ICR_ARBITRATION_LOST, "LOST ARB."},
 	{ICR_ASSERT_ACK, "ASSERT ACK"},
 	{ICR_ASSERT_BSY, "ASSERT BSY"},
 	{ICR_ASSERT_SEL, "ASSERT SEL"},
@@ -270,14 +278,14 @@ icrs[] = {
 	{0, NULL}
 },
 mrs[] = {
-	{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
-	{MR_TARGET, "MODE TARGET"},
-	{MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
-	{MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
-	{MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
-	{MR_MONITOR_BSY, "MODE MONITOR BSY"},
-	{MR_DMA_MODE, "MODE DMA"},
-	{MR_ARBITRATE, "MODE ARBITRATION"},
+	{MR_BLOCK_DMA_MODE, "BLOCK DMA MODE"},
+	{MR_TARGET, "TARGET"},
+	{MR_ENABLE_PAR_CHECK, "PARITY CHECK"},
+	{MR_ENABLE_PAR_INTR, "PARITY INTR"},
+	{MR_ENABLE_EOP_INTR, "EOP INTR"},
+	{MR_MONITOR_BSY, "MONITOR BSY"},
+	{MR_DMA_MODE, "DMA MODE"},
+	{MR_ARBITRATE, "ARBITRATE"},
 	{0, NULL}
 };
 
@@ -298,23 +306,23 @@ static void NCR5380_print(struct Scsi_Ho
 	icr = NCR5380_read(INITIATOR_COMMAND_REG);
 	basr = NCR5380_read(BUS_AND_STATUS_REG);
 
-	printk("STATUS_REG: %02x ", status);
+	printk(KERN_DEBUG "SR =   0x%02x : ", status);
 	for (i = 0; signals[i].mask; ++i)
 		if (status & signals[i].mask)
-			printk(",%s", signals[i].name);
-	printk("\nBASR: %02x ", basr);
+			printk(KERN_CONT "%s, ", signals[i].name);
+	printk(KERN_CONT "\nBASR = 0x%02x : ", basr);
 	for (i = 0; basrs[i].mask; ++i)
 		if (basr & basrs[i].mask)
-			printk(",%s", basrs[i].name);
-	printk("\nICR: %02x ", icr);
+			printk(KERN_CONT "%s, ", basrs[i].name);
+	printk(KERN_CONT "\nICR =  0x%02x : ", icr);
 	for (i = 0; icrs[i].mask; ++i)
 		if (icr & icrs[i].mask)
-			printk(",%s", icrs[i].name);
-	printk("\nMODE: %02x ", mr);
+			printk(KERN_CONT "%s, ", icrs[i].name);
+	printk(KERN_CONT "\nMR =   0x%02x : ", mr);
 	for (i = 0; mrs[i].mask; ++i)
 		if (mr & mrs[i].mask)
-			printk(",%s", mrs[i].name);
-	printk("\n");
+			printk(KERN_CONT "%s, ", mrs[i].name);
+	printk(KERN_CONT "\n");
 }
 
 static struct {


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux