[PATCH v7 15/17] scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some UFS devices (and may be host) have issues if LCC is
enabled. So we are setting PA_Local_TX_LCC_Enable to 0
before link startup which will make sure that both host
and device TX LCC are disabled once link startup is
completed.

Reviewed-by: Gilad Broner <gbroner@xxxxxxxxxxxxxx>
Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>

---
 drivers/scsi/ufs/ufs-qcom.c | 27 ++++++++++++++++++++-------
 drivers/scsi/ufs/unipro.h   |  1 +
 2 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index ed57729..966bacf 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -16,8 +16,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
-
 #include <linux/phy/phy-qcom-ufs.h>
+
 #include "ufshcd.h"
 #include "ufshcd-pltfrm.h"
 #include "unipro.h"
@@ -106,9 +106,11 @@ static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
 	if (!host->is_lane_clks_enabled)
 		return;
 
-	clk_disable_unprepare(host->tx_l1_sync_clk);
+	if (host->hba->lanes_per_direction > 1)
+		clk_disable_unprepare(host->tx_l1_sync_clk);
 	clk_disable_unprepare(host->tx_l0_sync_clk);
-	clk_disable_unprepare(host->rx_l1_sync_clk);
+	if (host->hba->lanes_per_direction > 1)
+		clk_disable_unprepare(host->rx_l1_sync_clk);
 	clk_disable_unprepare(host->rx_l0_sync_clk);
 
 	host->is_lane_clks_enabled = false;
@@ -272,9 +274,8 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
 
 	if (ret) {
-		dev_err(hba->dev,
-		"%s: ufs_qcom_phy_calibrate_phy()failed, ret = %d\n",
-		__func__, ret);
+		dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
+			__func__, ret);
 		goto out;
 	}
 
@@ -524,6 +525,18 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 			err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
 									  150);
 
+		/*
+		 * Some UFS devices (and may be host) have issues if LCC is
+		 * enabled. So we are setting PA_Local_TX_LCC_Enable to 0
+		 * before link startup which will make sure that both host
+		 * and device TX LCC are disabled once link startup is
+		 * completed.
+		 */
+		if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
+			err = ufshcd_dme_set(hba,
+					UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE),
+					0);
+
 		break;
 	case POST_CHANGE:
 		ufs_qcom_link_startup_post_change(hba);
@@ -1542,7 +1555,7 @@ static int ufs_qcom_probe(struct platform_device *pdev)
  * ufs_qcom_remove - set driver_data of the device to NULL
  * @pdev: pointer to platform device handle
  *
- * Always return 0
+ * Always returns 0
  */
 static int ufs_qcom_remove(struct platform_device *pdev)
 {
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 8082020..e2854e4 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -75,6 +75,7 @@
 #define PA_MAXRXSPEEDFAST	0x1541
 #define PA_MAXRXSPEEDSLOW	0x1542
 #define PA_TXLINKSTARTUPHS	0x1544
+#define PA_LOCAL_TX_LCC_ENABLE	0x155E
 #define PA_TXSPEEDFAST		0x1565
 #define PA_TXSPEEDSLOW		0x1566
 #define PA_REMOTEVERINFO	0x15A0
-- 
1.8.5.2

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux