Re: [PATCH v2] fusion-mptbase: handle failed allocation for workqueue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2016-02-18 at 10:00 +0100, Johannes Thumshirn wrote:
> On Wed, Feb 17, 2016 at 11:40:59PM -0500, Insu Yun wrote:
> > the failure of ioc->reset_work_q is checked,
> > but not ioc->fw_event_q.
> > 
> > Signed-off-by: Insu Yun <wuninsu@xxxxxxxxx>
> > ---
> >  drivers/message/fusion/mptbase.c | 44 ++++++++++++++++++++++++----------------
> >  1 file changed, 27 insertions(+), 17 deletions(-)
> > 
> > diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
> > index 5dcc031..53a5015 100644
> > --- a/drivers/message/fusion/mptbase.c
> > +++ b/drivers/message/fusion/mptbase.c
> > @@ -1871,9 +1871,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
> >  	if (!ioc->reset_work_q) {
> >  		printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
> >  		    ioc->name);
> > -		pci_release_selected_regions(pdev, ioc->bars);
> > -		kfree(ioc);
> > -		return -ENOMEM;
> > +		r = -ENOMEM;
> > +		goto err3;
> >  	}
> >  
> >  	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
> > @@ -1996,24 +1995,16 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
> >  	snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
> >  	ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
> >  
> > +	if (!ioc->fw_event_q) {
> > +		r = -ENOMEM;
> > +		goto err2;
> > +	}
> > +
> >  	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
> >  	    CAN_SLEEP)) != 0){
> >  		printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
> >  		    ioc->name, r);
> > -
> > -		list_del(&ioc->list);
> > -		if (ioc->alt_ioc)
> > -			ioc->alt_ioc->alt_ioc = NULL;
> > -		iounmap(ioc->memmap);
> > -		if (r != -5)
> > -			pci_release_selected_regions(pdev, ioc->bars);
> > -
> > -		destroy_workqueue(ioc->reset_work_q);
> > -		ioc->reset_work_q = NULL;
> > -
> > -		kfree(ioc);
> > -		pci_set_drvdata(pdev, NULL);
> > -		return r;
> > +		goto err1;
> >  	}
> >  
> >  	/* call per device driver probe entry point */
> > @@ -2040,6 +2031,25 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
> >  			msecs_to_jiffies(MPT_POLLING_INTERVAL));
> >  
> >  	return 0;
> > +
> > +err1:
> > +		destroy_workqueue(ioc->fw_event_q);
> > +		ioc->fw_event_q = NULL;
> > +err2::
> > +		destroy_workqueue(ioc->reset_work_q);
> > +		ioc->reset_work_q = NULL;
> > +
> > +		list_del(&ioc->list);
> > +		if (ioc->alt_ioc)
> > +			ioc->alt_ioc->alt_ioc = NULL;
> > +		iounmap(ioc->memmap);
> > +		pci_set_drvdata(pdev, NULL);
> > +err3:
> > +		if (r != -5)
> > +			pci_release_selected_regions(pdev, ioc->bars);
> > +		kfree(ioc);
> > +		return r;
> > +
> >  }
> 
> Please no. Not err1, err2 and err3.
> 
> err1 could be "goto destroy_fw_event_q", err2 "destroy_reset_workq", err3
> goto "free_ioc".

It also appears to me upon further inspection that the existing code has
other problems.  In particular, once mpt_mapresources() has returned
with a nonzero error code, it looks like iounmap() should be called, but
it is not in the case of a failed allocation of reset_work_q.  I'm also
not sure why pci_release_selected_regions() is only called for the case
of mpt_do_ioc_recovery() returning != -5 when it is called whenever
there is a failed allocation of reset_work_q.

Consider the attached patch (untested, because I don't have hardware):
It shows what I would do for labels & error handling.  If the rc != -5
case of return from mpt_do_ioc_recovery() could be eliminated, then
another label "out_free_fw_event_q:" could be added prior to the other
error cases at the end, and all the code after the printk() in that path
could be replaced by "goto out_free_fw_event_q;"

	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
	    CAN_SLEEP)) != 0){
		printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
		    ioc->name, r);
		goto out_free_fw_event_q;
	}
...

out_free_fw_event_q:
	destroy_workqueue(ioc->fw_event_q);
	ioc->fw_event_q = NULL;

out_remove_ioc:
...

However I do not know if that change is legitimate.

-Ewan

> >  
> >  /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
> > -- 
> > 1.9.1
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

>From 83f117b81d58d01bfe7e01e04e4f2f2a602e2c9f Mon Sep 17 00:00:00 2001
From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
Date: Thu, 18 Feb 2016 11:24:02 -0500
Subject: [PATCH RFC] mptbase: fixup error handling paths in mpt_attach()

mpt_attach() was not checking for the failure to create fw_event_q.
Also, iounmap() was not being called in all error cases after ioremap()
had been called by mpt_mapresources().
---
 drivers/message/fusion/mptbase.c | 37 +++++++++++++++++++++++++++++++------
 1 file changed, 31 insertions(+), 6 deletions(-)

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5dcc031..1fdc882 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1801,8 +1801,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ioc->pcidev = pdev;
 	if (mpt_mapresources(ioc)) {
-		kfree(ioc);
-		return r;
+		goto out_free_ioc;
 	}
 
 	/*
@@ -1871,9 +1870,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!ioc->reset_work_q) {
 		printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
 		    ioc->name);
-		pci_release_selected_regions(pdev, ioc->bars);
-		kfree(ioc);
-		return -ENOMEM;
+		r = -ENOMEM;
+		goto out_unmap_resources;
 	}
 
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
@@ -1995,12 +1993,21 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&ioc->fw_event_lock);
 	snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
 	ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+	if (!ioc->reset_work_q) {
+		printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
+		    ioc->name);
+		r = -ENOMEM;
+		goto out_remove_ioc;
+	}
 
 	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
 	    CAN_SLEEP)) != 0){
 		printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
 		    ioc->name, r);
 
+		destroy_workqueue(ioc->fw_event_q);
+		ioc->fw_event_q = NULL;
+
 		list_del(&ioc->list);
 		if (ioc->alt_ioc)
 			ioc->alt_ioc->alt_ioc = NULL;
@@ -2040,6 +2047,24 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 			msecs_to_jiffies(MPT_POLLING_INTERVAL));
 
 	return 0;
+
+out_remove_ioc:
+	list_del(&ioc->list);
+	if (ioc->alt_ioc)
+		ioc->alt_ioc->alt_ioc = NULL;
+	pci_set_drvdata(ioc->pcidev, NULL);
+
+	destroy_workqueue(ioc->reset_work_q);
+	ioc->reset_work_q = NULL;
+
+out_unmap_resources:
+	iounmap(ioc->memmap);
+	pci_release_selected_regions(pdev, ioc->bars);
+
+out_free_ioc:
+	kfree(ioc);
+
+	return r;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -6229,7 +6254,7 @@ mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
 	memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
 	memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
 
-	out:
+out:
 
 	if (pbuf)
 		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
-- 
2.1.0


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux