[PATCHv6 11/23] scsi_dh_alua: move optimize_stpg evaluation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When the optimize_stpg module option is set we should just set it
once during port_group allocation. Doing so allows us to override
it later with device specific settings.

Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Hannes Reinecke <hare@xxxxxxxx>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 61c67e6..0212aee 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -64,6 +64,10 @@
 #define ALUA_OPTIMIZE_STPG		1
 #define ALUA_RTPG_EXT_HDR_UNSUPP	2
 
+static uint optimize_stpg;
+module_param(optimize_stpg, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(optimize_stpg, "Allow use of a non-optimized path, rather than sending a STPG, when implicit TPGS is supported (0=No,1=Yes). Default is 0.");
+
 static LIST_HEAD(port_group_list);
 static DEFINE_SPINLOCK(port_group_lock);
 
@@ -219,6 +223,8 @@ struct alua_port_group *alua_alloc_pg(struct scsi_device *sdev,
 	pg->group_id = group_id;
 	pg->tpgs = tpgs;
 	pg->state = TPGS_STATE_OPTIMIZED;
+	if (optimize_stpg)
+		pg->flags |= ALUA_OPTIMIZE_STPG;
 	kref_init(&pg->kref);
 
 	spin_lock(&port_group_lock);
@@ -680,10 +686,6 @@ static int alua_set_params(struct scsi_device *sdev, const char *params)
 	return result;
 }
 
-static uint optimize_stpg;
-module_param(optimize_stpg, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(optimize_stpg, "Allow use of a non-optimized path, rather than sending a STPG, when implicit TPGS is supported (0=No,1=Yes). Default is 0.");
-
 /*
  * alua_activate - activate a path
  * @sdev: device on the path to be activated
@@ -705,9 +707,6 @@ static int alua_activate(struct scsi_device *sdev,
 
 	kref_get(&h->pg->kref);
 
-	if (optimize_stpg)
-		h->pg->flags |= ALUA_OPTIMIZE_STPG;
-
 	err = alua_rtpg(sdev, h->pg);
 	if (err != SCSI_DH_OK) {
 		kref_put(&h->pg->kref, release_port_group);
-- 
1.8.5.6

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux