This patch has the goal to add support for DesignWare UFS Controller specific operations and to add specific platform and pci drivers. Signed-off-by: Joao Pinto <jpinto@xxxxxxxxxxxx> --- Changes v5->v6: - Patch bad format fixed Changes v4->v5 (Akinobu Mita): - All functions used only locally in ufshcd-dwc are now declared as static - ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify function (ufshcd_dwc_link_startup_notify) was created to deal with the DWC specific init routines - 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected and 40-bit is not then it assumes a 20-bit config Changes v3->v4 (Arnd Bergmann and Mark Rutland): - SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT or SCSI_UFS_DWC_PCI - Compatibility string has the ufs core version for info purposes since the driver is capable of getting the controller version from its registers - Created ufs-dwc-pci glue driver with specific DWC data - MPHY configuration remains in the ufshcd-dwc since it is unipro attribute writting only not following the a linux phy framework logic Changes v2->v3 (Julian Calaby): - Implement a common DWC code to be used by the platform and pci glue drivers - Synopsys ID & Class added to the existing pci driver and specific DWC was also added to the pci driver Changes v1->v2 (Akinobu Mita): - Implement a platform driver that uses the existing UFS core driver - Add DWC specific code to the existing UFS core driver Documentation/devicetree/bindings/ufs/ufs-dwc.txt | 17 + MAINTAINERS | 6 + drivers/scsi/ufs/Kconfig | 41 ++ drivers/scsi/ufs/Makefile | 3 + drivers/scsi/ufs/ufs-dwc-pci.c | 180 ++++++ drivers/scsi/ufs/ufs-dwc.c | 102 +++ drivers/scsi/ufs/ufshcd-dwc.c | 736 ++++++++++++++++++++++ drivers/scsi/ufs/ufshcd-dwc.h | 18 + drivers/scsi/ufs/ufshcd.c | 50 +- drivers/scsi/ufs/ufshcd.h | 13 + drivers/scsi/ufs/ufshci-dwc.h | 42 ++ drivers/scsi/ufs/ufshci.h | 1 + drivers/scsi/ufs/unipro.h | 39 ++ 13 files changed, 1231 insertions(+), 17 deletions(-) create mode 100644 Documentation/devicetree/bindings/ufs/ufs-dwc.txt create mode 100644 drivers/scsi/ufs/ufs-dwc-pci.c create mode 100644 drivers/scsi/ufs/ufs-dwc.c create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h create mode 100644 drivers/scsi/ufs/ufshci-dwc.h diff --git a/Documentation/devicetree/bindings/ufs/ufs-dwc.txt b/Documentation/devicetree/bindings/ufs/ufs-dwc.txt new file mode 100644 index 0000000..f38a3f5 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-dwc.txt @@ -0,0 +1,17 @@ +* Universal Flash Storage (UFS) DesignWare Host Controller + +DWC_UFSHC nodes are defined to describe on-chip UFS host controllers. +Each UFS controller instance should have its own node. + +Required properties: +- compatible : compatible string ("snps,ufshcd-1.0", "snps,ufshcd-1.1" + or "snps,ufshcd-2.0") +- reg : <registers mapping> +- interrupts : <interrupt mapping for UFS host controller IRQ> + +Example: + dwc_ufshcd@0xD0000000 { + compatible = "snps,ufshcd-2.0"; + reg = < 0xD0000000 0x10000 >; + interrupts = < 24 >; + }; diff --git a/MAINTAINERS b/MAINTAINERS index d2f94e2..3db3c4c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11006,6 +11006,12 @@ S: Supported F: Documentation/scsi/ufs.txt F: drivers/scsi/ufs/ +UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS +M: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx> +L: linux-scsi@xxxxxxxxxxxxxxx +S: Supported +F: drivers/scsi/ufs/*dwc* + UNSORTED BLOCK IMAGES (UBI) M: Artem Bityutskiy <dedekind1@xxxxxxxxx> M: Richard Weinberger <richard@xxxxxx> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 5f45307..b4c353c 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -83,3 +83,44 @@ config SCSI_UFS_QCOM Select this if you have UFS controller on QCOM chipset. If unsure, say N. + +config SCSI_UFS_DWC_HOOKS + bool + +config SCSI_UFS_DWC_PLAT + tristate "DesignWare UFS controller platform glue driver" + depends on SCSI_UFSHCD_PLATFORM + select SCSI_UFS_DWC_HOOKS + help + This selects the DesignWare UFS host controller platform glue driver. + + Select this if you have a DesignWare UFS controller on Platform bus. + If unsure, say N. + +config SCSI_UFS_DWC_PCI + tristate "DesignWare UFS controller pci glue driver" + depends on SCSI_UFSHCD_PCI + select SCSI_UFS_DWC_HOOKS + help + This selects the DesignWare UFS host controller pci glue driver. + + Select this if you have a DesignWare UFS controller on pci bus. + If unsure, say N. + +config SCSI_UFS_DWC_MPHY_TC + bool "Support for the Synopsys MPHY Test Chip" + depends on SCSI_UFS_DWC_HOOKS && (SCSI_UFSHCD_PCI || SCSI_UFS_DWC_PLAT) + ---help--- + This selects the support for the Synopsys MPHY Test Chip. + + Select this if you have a Synopsys MPHY Test Chip. + If unsure, say N. + +config SCSI_UFS_DWC_40BIT_RMMI + bool "40-bit RMMI MPHY" + depends on SCSI_UFS_DWC_MPHY_TC + ---help--- + This specifies that the Synopsys MPHY supports 40-bit RMMI operations. + + Select this if you are using a 40-bit RMMI Synopsys MPHY. + If unsure, say N. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index 8303bcc..bab8c05 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,4 +1,7 @@ # UFSHCD makefile +obj-$(CONFIG_SCSI_UFS_DWC_HOOKS) += ufshcd-dwc.o +obj-$(CONFIG_SCSI_UFS_DWC_PLAT) += ufs-dwc.o +obj-$(CONFIG_SCSI_UFS_DWC_PCI) += ufs-dwc-pci.o obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o diff --git a/drivers/scsi/ufs/ufs-dwc-pci.c b/drivers/scsi/ufs/ufs-dwc-pci.c new file mode 100644 index 0000000..3432466 --- /dev/null +++ b/drivers/scsi/ufs/ufs-dwc-pci.c @@ -0,0 +1,180 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "ufshcd.h" +#include "ufshcd-dwc.h" + +#include <linux/pci.h> +#include <linux/pm_runtime.h> + +#ifdef CONFIG_PM +/** + * ufs_dw_pci_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns 0 if successful + * Returns non-zero otherwise + */ +static int ufs_dw_pci_suspend(struct device *dev) +{ + return ufshcd_system_suspend(dev_get_drvdata(dev)); +} + +/** + * ufs_dw_pci_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns 0 if successful + * Returns non-zero otherwise + */ +static int ufs_dw_pci_resume(struct device *dev) +{ + return ufshcd_system_resume(dev_get_drvdata(dev)); +} + +static int ufs_dw_pci_runtime_suspend(struct device *dev) +{ + return ufshcd_runtime_suspend(dev_get_drvdata(dev)); +} +static int ufs_dw_pci_runtime_resume(struct device *dev) +{ + return ufshcd_runtime_resume(dev_get_drvdata(dev)); +} +static int ufs_dw_pci_runtime_idle(struct device *dev) +{ + return ufshcd_runtime_idle(dev_get_drvdata(dev)); +} +#else /* !CONFIG_PM */ +#define ufs_dw_pci_suspend NULL +#define ufs_dw_pci_resume NULL +#define ufs_dw_pci_runtime_suspend NULL +#define ufs_dw_pci_runtime_resume NULL +#define ufs_dw_pci_runtime_idle NULL +#endif /* CONFIG_PM */ + +/** + * struct ufs_hba_dwc_vops - UFS DWC specific variant operations + */ +static struct ufs_hba_variant_ops ufs_dwc_pci_hba_vops = { + .name = "ufshcd-dwc-pci", + .link_startup_notify = ufshcd_dwc_link_startup_notify, +}; + +/** + * ufs_dw_pci_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufs_dw_pci_shutdown(struct pci_dev *pdev) +{ + ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +/** + * ufs_dw_pci_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufs_dw_pci_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + pm_runtime_forbid(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + ufshcd_remove(hba); +} + +/** + * ufs_dw_pci_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int +ufs_dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ufs_hba *hba; + void __iomem *mmio_base; + int err; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pcim_enable_device failed\n"); + return err; + } + + pci_set_master(pdev); + + err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request and iomap failed\n"); + return err; + } + + mmio_base = pcim_iomap_table(pdev)[0]; + + err = ufshcd_alloc_host(&pdev->dev, &hba); + if (err) { + dev_err(&pdev->dev, "Allocation failed\n"); + return err; + } + + INIT_LIST_HEAD(&hba->clk_list_head); + + hba->vops = &ufs_dwc_pci_hba_vops; + + err = ufshcd_init(hba, mmio_base, pdev->irq); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + return err; + } + + pci_set_drvdata(pdev, hba); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_allow(&pdev->dev); + + return 0; +} + +static const struct dev_pm_ops ufs_dw_pci_pm_ops = { + .suspend = ufs_dw_pci_suspend, + .resume = ufs_dw_pci_resume, + .runtime_suspend = ufs_dw_pci_runtime_suspend, + .runtime_resume = ufs_dw_pci_runtime_resume, + .runtime_idle = ufs_dw_pci_runtime_idle, +}; + +static const struct pci_device_id ufs_dw_pci_tbl[] = { + { PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufs_dw_pci_tbl); + +static struct pci_driver ufs_dw_pci_driver = { + .name = UFSHCD, + .id_table = ufs_dw_pci_tbl, + .probe = ufs_dw_pci_probe, + .remove = ufs_dw_pci_remove, + .shutdown = ufs_dw_pci_shutdown, + .driver = { + .pm = &ufs_dw_pci_pm_ops + }, +}; + +module_pci_driver(ufs_dw_pci_driver); + +MODULE_AUTHOR("Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>"); +MODULE_DESCRIPTION("DesignWare UFS host controller PCI glue driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/scsi/ufs/ufs-dwc.c b/drivers/scsi/ufs/ufs-dwc.c new file mode 100644 index 0000000..7b2fc91 --- /dev/null +++ b/drivers/scsi/ufs/ufs-dwc.c @@ -0,0 +1,102 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/delay.h> + +#include "ufshcd-pltfrm.h" +#include "ufshcd-dwc.h" + +/** + * struct ufs_hba_dwc_vops - UFS DWC specific variant operations + * + */ +static struct ufs_hba_variant_ops ufs_dwc_hba_vops = { + .name = "ufshcd-dwc", + .link_startup_notify = ufshcd_dwc_link_startup_notify, +}; + +/** + * ufs_dwc_probe() + * @pdev: pointer to platform device structure + * + */ +static int ufs_dwc_probe(struct platform_device *pdev) +{ + int err; + struct device *dev = &pdev->dev; + + /* Perform generic probe */ + err = ufshcd_pltfrm_init(pdev, &ufs_dwc_hba_vops); + if (err) + dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err); + + return err; +} + +/** + * ufs_dwc_remove() + * @pdev: pointer to platform device structure + * + */ +static int ufs_dwc_remove(struct platform_device *pdev) +{ + struct ufs_hba *hba = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&(pdev)->dev); + ufshcd_remove(hba); + + return 0; +} + +static const struct of_device_id ufs_dwc_match[] = { + { + .compatible = "snps,ufshcd-2.0" + }, + { + .compatible = "snps,ufshcd-1.1" + }, + { + .compatible = "snps,ufshcd-1.0" + }, + { }, +}; +MODULE_DEVICE_TABLE(of, ufs_dwc_match); + +static const struct dev_pm_ops ufs_dwc_pm_ops = { + .suspend = ufshcd_pltfrm_suspend, + .resume = ufshcd_pltfrm_resume, + .runtime_suspend = ufshcd_pltfrm_runtime_suspend, + .runtime_resume = ufshcd_pltfrm_runtime_resume, + .runtime_idle = ufshcd_pltfrm_runtime_idle, +}; + +static struct platform_driver ufs_dwc_driver = { + .probe = ufs_dwc_probe, + .remove = ufs_dwc_remove, + .shutdown = ufshcd_pltfrm_shutdown, + .driver = { + .name = "ufshcd-dwc", + .pm = &ufs_dwc_pm_ops, + .of_match_table = of_match_ptr(ufs_dwc_match), + }, +}; + +module_platform_driver(ufs_dwc_driver); + +MODULE_ALIAS("platform:ufshcd-dwc"); +MODULE_DESCRIPTION("DesignWare UFS Host platform glue driver"); +MODULE_AUTHOR("Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c new file mode 100644 index 0000000..5740159 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-dwc.c @@ -0,0 +1,736 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "ufshcd.h" +#include "unipro.h" + +#include "ufshcd-dwc.h" +#include "ufshci-dwc.h" + +/** + * ufshcd_dwc_program_clk_div() + * This function programs the clk divider value. This value is needed to + * provide 1 microsecond tick to unipro layer. + * @hba: Private Structure pointer + * @divider_val: clock divider value to be programmed + * + */ +static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val) +{ + ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV); +} + +/** + * ufshcd_dwc_link_is_up() + * Check if link is up + * @hba: private structure poitner + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dwc_link_is_up(struct ufs_hba *hba) +{ + int dme_result = 0; + + ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result); + + if (dme_result == UFSHCD_LINK_IS_UP) { + ufshcd_set_link_active(hba); + return 0; + } + + return 1; +} + +/** + * ufshcd_dwc_connection_setup() + * This function configures both the local side (host) and the peer side + * (device) unipro attributes to establish the connection to application/ + * cport. + * This function is not required if the hardware is properly configured to + * have this connection setup on reset. But invoking this function does no + * harm and should be fine even working with any ufs device. + * + * @hba: pointer to drivers private data + * + * Returns 0 on success non-zero value on failure + */ +static int ufshcd_dwc_connection_setup(struct ufs_hba *hba) +{ + int ret = 0; + + /* Local side Configuration */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 0); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID), 0); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), 0); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), 1); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERCPORTID), 0); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), 0); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), 0x6); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTMODE), 1); + if (ret) + goto out; + + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 1); + if (ret) + goto out; + + + /* Peer side Configuration */ + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 0); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(N_DEVICEID), 1); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), 1); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), 1); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_PEERCPORTID), 0); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), 0); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), 0x6); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CPORTMODE), 1); + if (ret) + goto out; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 1); + if (ret) + goto out; + +out: + return ret; +} + +#ifdef CONFIG_SCSI_UFS_DWC_40BIT_RMMI +/** + * ufshcd_dwc_setup_40bit_rmmi() + * This function configures Synopsys MPHY specific atributes (40-bit RMMI) + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int ufshcd_dwc_setup_40bit_rmmi(struct ufs_hba *hba) +{ + int ret = 0; + + /* Common block Tx Global Hibernate Exit */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00); + if (ret) + goto out; + + /* Common block Reference Clock Mode 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(REFCLKMODE), 0x01); + if (ret) + goto out; + + /* Common block DCO Target Frequency MAX PWM G1:7Mpbs */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CDIRECTCTRL6), 0x80); + if (ret) + goto out; + + /* Common block TX and RX Div Factor is 4 7Mbps/40 = 175KHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDIVFACTOR), 0x08); + if (ret) + goto out; + + /* Common Block DC0 Ctrl 5*/ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDCOCTRL5), 0x64); + if (ret) + goto out; + + /* Common Block Program Tunning*/ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGTUNING), 0x09); + if (ret) + goto out; + + /* Common Block Real Time Observe Select - for debugging */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(RTOBSERVESELECT), 0x00); + if (ret) + goto out; + + /* Lane 0 configuration*/ + + /* TX Reference Clock 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ, + SELIND_LN0_TX), 0x01); + if (ret) + goto out; + + /* TX Configuration Clock Frequency Val; Divider setting */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, + SELIND_LN0_TX), 0x19); + if (ret) + goto out; + + /* TX 40-bit RMMI Interface */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR, + SELIND_LN0_TX), 0x14); + if (ret) + goto out; + + /* TX dither configuration */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2, + SELIND_LN0_TX), 0xd6); + if (ret) + goto out; + + /* RX Reference Clock 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ, + SELIND_LN0_RX), 0x01); + if (ret) + goto out; + + /* RX Configuration Clock Frequency Val; Divider setting */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, + SELIND_LN0_RX), 0x19); + if (ret) + goto out; + + /* RX 40-bit RMMI Interface */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN, + SELIND_LN0_RX), 4); + if (ret) + goto out; + + /* RX Squelch Detector output is routed to RX hibern8 exit signal */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8, + SELIND_LN0_RX), 0x80); + if (ret) + goto out; + + /* RX Squelch Detector output is routed to RX hibern8 exit signal */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8, + SELIND_LN0_RX), 0x80); + if (ret) + goto out; + + /* Common block Direct Control 10 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL10), 0x04); + if (ret) + goto out; + + /* Common block Direct Control 19 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL19), 0x02); + if (ret) + goto out; + + /* RX Squelch Detector output is routed to RX hibern8 exit signal */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8, + SELIND_LN0_RX), 0x80); + if (ret) + goto out; + + /* ENARXDIRECTCFG4 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, + SELIND_LN0_RX), 0x03); + if (ret) + goto out; + + /* CFGRXOVR8 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8, + SELIND_LN0_RX), 0x16); + if (ret) + goto out; + + /* RXDIRECTCTRL2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2, + SELIND_LN0_RX), 0x42); + if (ret) + goto out; + + /* ENARXDIRECTCFG3 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, + SELIND_LN0_RX), 0xa4); + if (ret) + goto out; + + /* RXCALCTRL */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL, + SELIND_LN0_RX), 0x01); + if (ret) + goto out; + + /* ENARXDIRECTCFG2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, + SELIND_LN0_RX), 0x01); + if (ret) + goto out; + + /* CFGOVR4 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4, + SELIND_LN0_RX), 0x28); + if (ret) + goto out; + + /* RXSQCTRL */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL, + SELIND_LN0_RX), 0x1E); + if (ret) + goto out; + + /* CFGOVR6 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6, + SELIND_LN0_RX), 0x2f); + if (ret) + goto out; + + /* CBPRGPLL2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGPLL2), 0x00); + if (ret) + goto out; + +out: + return ret; +} + +#else + +/** + * ufshcd_dwc_setup_20bit_rmmi_lane0() + * This function configures Synopsys MPHY 20-bit RMMI Lane 0 + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int ufshcd_dwc_setup_20bit_rmmi_lane0(struct ufs_hba *hba) +{ + int ret = 0; + + /* TX Reference Clock 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ, + SELIND_LN0_TX), 0x01); + if (ret) + goto out; + + /* TX Configuration Clock Frequency Val; Divider setting */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, + SELIND_LN0_TX), 0x19); + if (ret) + goto out; + + /* RX Configuration Clock Frequency Val; Divider setting */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, + SELIND_LN0_RX), 0x19); + if (ret) + goto out; + + /* TX 20-bit RMMI Interface */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR, + SELIND_LN0_TX), 0x12); + if (ret) + goto out; + + /* TX dither configuration */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2, + SELIND_LN0_TX), 0xd6); + if (ret) + goto out; + + /* RX Reference Clock 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ, + SELIND_LN0_RX), 0x01); + if (ret) + goto out; + + /* RX 20-bit RMMI Interface */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN, + SELIND_LN0_RX), 2); + if (ret) + goto out; + + /* RX Squelch Detector output is routed to RX hibern8 exit signal */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8, + SELIND_LN0_RX), 0x80); + if (ret) + goto out; + + /* Common block Direct Control 10 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL10), 0x04); + if (ret) + goto out; + + /* Common block Direct Control 19 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL19), 0x02); + if (ret) + goto out; + + /* ENARXDIRECTCFG4 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, + SELIND_LN0_RX), 0x03); + if (ret) + goto out; + + /* CFGRXOVR8 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8, + SELIND_LN0_RX), 0x16); + if (ret) + goto out; + + /* RXDIRECTCTRL2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2, + SELIND_LN0_RX), 0x42); + + if (ret) + goto out; + + /* ENARXDIRECTCFG3 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, + SELIND_LN0_RX), 0xa4); + + if (ret) + goto out; + + /* RXCALCTRL */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL, + SELIND_LN0_RX), 0x01); + if (ret) + goto out; + + /* ENARXDIRECTCFG2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, + SELIND_LN0_RX), 0x01); + if (ret) + goto out; + + /* CFGOVR4 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4, + SELIND_LN0_RX), 0x28); + if (ret) + goto out; + + /* RXSQCTRL */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL, + SELIND_LN0_RX), 0x1E); + if (ret) + goto out; + + /* CFGOVR6 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6, + SELIND_LN0_RX), 0x2f); + if (ret) + goto out; + + /* CBPRGPLL2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGPLL2), 0x00); + +out: + return ret; +} + +/** + * ufshcd_dwc_setup_20bit_rmmi_lane1() + * This function configures Synopsys MPHY 20-bit RMMI Lane 1 + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int ufshcd_dwc_setup_20bit_rmmi_lane1(struct ufs_hba *hba) +{ + int connected_rx_lanes = 0; + int connected_tx_lanes = 0; + int ret = 0; + + /* Get the available lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), + &connected_rx_lanes); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &connected_tx_lanes); + + if (connected_tx_lanes == 2) { + + /* TX Reference Clock 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ, + SELIND_LN1_TX), 0x0d); + if (ret) + goto out; + + /* TX Configuration Clock Frequency Val; Divider setting */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, + SELIND_LN1_TX), 0x19); + if (ret) + goto out; + + /* TX 20-bit RMMI Interface */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR, + SELIND_LN1_TX), 0x12); + if (ret) + goto out; + + /* TX dither configuration */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2, + SELIND_LN0_TX), 0xd6); + if (ret) + goto out; + } + + if (connected_rx_lanes == 2) { + + /* RX Reference Clock 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ, + SELIND_LN1_RX), 0x01); + if (ret) + goto out; + + /* RX Configuration Clock Frequency Val; Divider setting */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, + SELIND_LN1_RX), 0x19); + if (ret) + goto out; + + /* RX 20-bit RMMI Interface */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN, + SELIND_LN1_RX), 2); + if (ret) + goto out; + + /* RX Squelch Detector output is routed to RX hibern8 exit + * signal + */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8, + SELIND_LN1_RX), 0x80); + if (ret) + goto out; + + /* ENARXDIRECTCFG4 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, + SELIND_LN1_RX), 0x03); + if (ret) + goto out; + + /* CFGRXOVR8 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8, + SELIND_LN1_RX), 0x16); + if (ret) + goto out; + + /* RXDIRECTCTRL2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2, + SELIND_LN1_RX), 0x42); + if (ret) + goto out; + + /* ENARXDIRECTCFG3 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, + SELIND_LN1_RX), 0xa4); + if (ret) + goto out; + + /* RXCALCTRL */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL, + SELIND_LN1_RX), 0x01); + if (ret) + goto out; + + /* ENARXDIRECTCFG2 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, + SELIND_LN1_RX), 0x01); + if (ret) + goto out; + + /* CFGOVR4 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4, + SELIND_LN1_RX), 0x28); + if (ret) + goto out; + + /* RXSQCTRL */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL, + SELIND_LN1_RX), 0x1E); + if (ret) + goto out; + + /* CFGOVR6 */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6, + SELIND_LN1_RX), 0x2f); + if (ret) + goto out; + } + +out: + return ret; +} + +/** + * ufshcd_dwc_setup_20bit_rmmi() + * This function configures Synopsys MPHY specific atributes (20-bit RMMI) + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int ufshcd_dwc_setup_20bit_rmmi(struct ufs_hba *hba) +{ + int ret = 0; + + /* Common block Tx Global Hibernate Exit */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00); + if (ret) + goto out; + + /* Common block Reference Clock Mode 26MHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(REFCLKMODE), 0x01); + if (ret) + goto out; + + /* Common block DCO Target Frequency MAX PWM G1:9Mpbs */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CDIRECTCTRL6), 0xc0); + if (ret) + goto out; + + /* Common block TX and RX Div Factor is 4 7Mbps/20 = 350KHz */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDIVFACTOR), 0x44); + if (ret) + goto out; + + /* Common Block DC0 Ctrl 5*/ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDCOCTRL5), 0x64); + if (ret) + goto out; + + /* Common Block Program Tunning*/ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGTUNING), 0x09); + if (ret) + goto out; + + /* Common Block Real Time Observe Select - for debugging */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(RTOBSERVESELECT), 0x00); + if (ret) + goto out; + + /* Lane 0 configuration*/ + ret = ufshcd_dwc_setup_20bit_rmmi_lane0(hba); + if (ret) + goto out; + + /* Lane 1 configuration*/ + ret = ufshcd_dwc_setup_20bit_rmmi_lane1(hba); + if (ret) + goto out; + +out: + return ret; +} +#endif + +/** + * ufshcd_dwc_setup_mphy() + * This function configures Local (host) Synopsys MPHY specific attributes + * + * @hba: Pointer to drivers structure + * + * Returns 0 on success non-zero value on failure + */ +static int ufshcd_dwc_setup_mphy(struct ufs_hba *hba) +{ + int ret = 0; + +#ifdef CONFIG_SCSI_UFS_DWC_40BIT_RMMI + dev_info(hba->dev, "Configuring MPHY 40-bit RMMI"); + ret = ufshcd_dwc_setup_40bit_rmmi(hba); + if (ret) { + dev_err(hba->dev, "40-bit RMMI configuration failed"); + goto out; + } +#else + dev_info(hba->dev, "Configuring MPHY 20-bit RMMI"); + ret = ufshcd_dwc_setup_20bit_rmmi(hba); + if (ret) { + dev_err(hba->dev, "20-bit RMMI configuration failed"); + goto out; + } +#endif + /* To write Shadow register bank to effective configuration block */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01); + if (ret) + goto out; + + /* To configure Debug OMC */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01); + +out: + return ret; +} + +/** + * ufshcd_dwc_link_startup_notify() + * UFS Host DWC specific link startup sequence + * @hba: private structure poitner + * @status: Callback notify status + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + int err = 0; + + if (status == PRE_CHANGE) { + ufshcd_dwc_program_clk_div(hba, UFSHCD_CLK_DIV_125); +#ifdef CONFIG_SCSI_UFS_DWC_MPHY_TC + err = ufshcd_dwc_setup_mphy(hba); + if (err) { + dev_err(hba->dev, "MPHY configuration failed (%d)", + err); + goto out; + } +#endif + } else { /* POST_CHANGE */ + err = ufshcd_dwc_link_is_up(hba); + if (err) { + dev_err(hba->dev, "Link is not up"); + goto out; + } + + err = ufshcd_dwc_connection_setup(hba); + if (err) + dev_err(hba->dev, "Connection setup failed (%d)", err); + } + +out: + return err; +} +EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify); diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/scsi/ufs/ufshcd-dwc.h new file mode 100644 index 0000000..ca65ee1 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-dwc.h @@ -0,0 +1,18 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _UFSHCD_DWC_H +#define _UFSHCD_DWC_H + +int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status); +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 85cd256..f0a985f 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -104,13 +104,6 @@ enum { UFSHCD_CAN_QUEUE = 32, }; -/* UFSHCD states */ -enum { - UFSHCD_STATE_RESET, - UFSHCD_STATE_ERROR, - UFSHCD_STATE_OPERATIONAL, -}; - /* UFSHCD error handling flags */ enum { UFSHCD_EH_IN_PROGRESS = (1 << 0), @@ -138,8 +131,6 @@ enum { #define ufshcd_clear_eh_in_progress(h) \ (h->eh_flags &= ~UFSHCD_EH_IN_PROGRESS) -#define ufshcd_set_ufs_dev_active(h) \ - ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) #define ufshcd_set_ufs_dev_sleep(h) \ ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) #define ufshcd_set_ufs_dev_poweroff(h) \ @@ -1223,6 +1214,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) ret = -EINVAL; } break; + case UTP_CMD_TYPE_UFS_STORAGE: case UTP_CMD_TYPE_DEV_MANAGE: ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE); if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) @@ -1287,6 +1279,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) struct ufshcd_lrb *lrbp; struct ufs_hba *hba; unsigned long flags; + u32 upiu_flags; int tag; int err = 0; @@ -1343,10 +1336,23 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) lrbp->task_tag = tag; lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun); lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false; - lrbp->command_type = UTP_CMD_TYPE_SCSI; + + if (hba->ufs_version == UFSHCI_VERSION_20) + lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE; + else + lrbp->command_type = UTP_CMD_TYPE_SCSI; /* form UPIU before issuing the command */ - ufshcd_compose_upiu(hba, lrbp); + if (hba->ufs_version == UFSHCI_VERSION_20) { + if (likely(lrbp->cmd)) { + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, + lrbp->cmd->sc_data_direction); + ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags); + } else + err = -EINVAL; + } else + ufshcd_compose_upiu(hba, lrbp); + err = ufshcd_map_sg(lrbp); if (err) { lrbp->cmd = NULL; @@ -1371,7 +1377,12 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, lrbp->sense_buffer = NULL; lrbp->task_tag = tag; lrbp->lun = 0; /* device management cmd is not specific to any LUN */ - lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE; + + if (hba->ufs_version == UFSHCI_VERSION_20) + lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE; + else + lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE; + lrbp->intr_cmd = true; /* No interrupt aggregation */ hba->dev_cmd.type = cmd_type; @@ -2063,7 +2074,7 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba) * * Returns 0 on success, non-zero value on failure */ -static int ufshcd_dme_link_startup(struct ufs_hba *hba) +int ufshcd_dme_link_startup(struct ufs_hba *hba) { struct uic_command uic_cmd = {0}; int ret; @@ -2076,6 +2087,7 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba) "dme-link-startup: error code %d\n", ret); return ret; } +EXPORT_SYMBOL_GPL(ufshcd_dme_link_startup); static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba) { @@ -2511,7 +2523,7 @@ static int ufshcd_config_pwr_mode(struct ufs_hba *hba, * * Set fDeviceInit flag and poll until device toggles it. */ -static int ufshcd_complete_dev_init(struct ufs_hba *hba) +int ufshcd_complete_dev_init(struct ufs_hba *hba) { int i, retries, err = 0; bool flag_res = 1; @@ -2555,6 +2567,7 @@ static int ufshcd_complete_dev_init(struct ufs_hba *hba) out: return err; } +EXPORT_SYMBOL_GPL(ufshcd_complete_dev_init); /** * ufshcd_make_hba_operational - Make UFS controller operational @@ -2568,7 +2581,7 @@ out: * * Returns 0 on success, non-zero value on failure */ -static int ufshcd_make_hba_operational(struct ufs_hba *hba) +int ufshcd_make_hba_operational(struct ufs_hba *hba) { int err = 0; u32 reg; @@ -2609,6 +2622,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba) out: return err; } +EXPORT_SYMBOL_GPL(ufshcd_make_hba_operational); /** * ufshcd_hba_enable - initialize the controller @@ -2784,7 +2798,7 @@ out: * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations. */ -static int ufshcd_verify_dev_init(struct ufs_hba *hba) +int ufshcd_verify_dev_init(struct ufs_hba *hba) { int err = 0; int retries; @@ -2807,6 +2821,7 @@ static int ufshcd_verify_dev_init(struct ufs_hba *hba) dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); return err; } +EXPORT_SYMBOL_GPL(ufshcd_verify_dev_init); /** * ufshcd_set_queue_depth - set lun queue depth @@ -3187,7 +3202,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba) /* Do not touch lrbp after scsi done */ cmd->scsi_done(cmd); __ufshcd_release(hba); - } else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) { + } else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE || + lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) { if (hba->dev_cmd.complete) complete(hba->dev_cmd.complete); } diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 2570d94..e03ea36 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -76,6 +76,13 @@ enum dev_cmd_type { DEV_CMD_TYPE_QUERY = 0x1, }; +/* UFSHCD states */ +enum { + UFSHCD_STATE_RESET, + UFSHCD_STATE_ERROR, + UFSHCD_STATE_OPERATIONAL, +}; + /** * struct uic_command - UIC command structure * @command: UIC command @@ -124,6 +131,8 @@ enum uic_link_state { UIC_LINK_ACTIVE_STATE) #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \ UIC_LINK_HIBERN8_STATE) +#define ufshcd_set_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) /* * UFS Power management levels. @@ -634,6 +643,10 @@ extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, u8 attr_set, u32 mib_val, u8 peer); extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, u32 *mib_val, u8 peer); +int ufshcd_dme_link_startup(struct ufs_hba *hba); +int ufshcd_make_hba_operational(struct ufs_hba *hba); +int ufshcd_verify_dev_init(struct ufs_hba *hba); +int ufshcd_complete_dev_init(struct ufs_hba *hba); /* UIC command interfaces for DME primitives */ #define DME_LOCAL 0 diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h new file mode 100644 index 0000000..08ae0ef --- /dev/null +++ b/drivers/scsi/ufs/ufshci-dwc.h @@ -0,0 +1,42 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _UFSHCI_DWC_H +#define _UFSHCI_DWC_H + +/* DWC HC UFSHCI specific Registers */ +enum dwc_specific_registers { + DWC_UFS_REG_HCLKDIV = 0xFC, +}; + +/* Link Status*/ +enum link_status { + UFSHCD_LINK_IS_DOWN = 1, + UFSHCD_LINK_IS_UP = 2, +}; + +/* Clock Divider Values: Hex equivalent of frequency in MHz */ +enum clk_div_values { + UFSHCD_CLK_DIV_62_5 = 0x3e, + UFSHCD_CLK_DIV_125 = 0x7d, + UFSHCD_CLK_DIV_200 = 0xc8, +}; + +/* Selector Index */ +enum selector_index { + SELIND_LN0_TX = 0x00, + SELIND_LN1_TX = 0x01, + SELIND_LN0_RX = 0x04, + SELIND_LN1_RX = 0x05, +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index 0ae0967..8dba0e7 100644 --- a/drivers/scsi/ufs/ufshci.h +++ b/drivers/scsi/ufs/ufshci.h @@ -273,6 +273,7 @@ enum { UTP_CMD_TYPE_SCSI = 0x0, UTP_CMD_TYPE_UFS = 0x1, UTP_CMD_TYPE_DEV_MANAGE = 0x2, + UTP_CMD_TYPE_UFS_STORAGE = 0x11, }; enum { diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h index 816a8a4..da16254 100644 --- a/drivers/scsi/ufs/unipro.h +++ b/drivers/scsi/ufs/unipro.h @@ -35,6 +35,10 @@ #define TX_LCC_SEQUENCER 0x0032 #define TX_MIN_ACTIVATETIME 0x0033 #define TX_PWM_G6_G7_SYNC_LENGTH 0x0034 +#define TX_REFCLKFREQ 0x00EB +#define TX_CFGCLKFREQVAL 0x00EC +#define CFGEXTRATTR 0x00F0 +#define DITHERCTRL2 0x00F1 /* * M-RX Configuration Attributes @@ -48,8 +52,38 @@ #define RX_ENTER_HIBERN8 0x00A7 #define RX_BYPASS_8B10B_ENABLE 0x00A8 #define RX_TERMINATION_FORCE_ENABLE 0x0089 +#define RX_REFCLKFREQ 0x00EB +#define RX_CFGCLKFREQVAL 0x00EC +#define CFGWIDEINLN 0x00F0 +#define CFGRXCDR8 0x00BA +#define ENARXDIRECTCFG4 0x00F2 +#define CFGRXOVR8 0x00BD +#define RXDIRECTCTRL2 0x00C7 +#define ENARXDIRECTCFG3 0x00F3 +#define RXCALCTRL 0x00B4 +#define ENARXDIRECTCFG2 0x00F4 +#define CFGRXOVR4 0x00E9 +#define RXSQCTRL 0x00B5 +#define CFGRXOVR6 0x00BF #define is_mphy_tx_attr(attr) (attr < RX_MODE) + +/* + * Common Block Attributes + */ +#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B) +#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF) +#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD) +#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6) +#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA) +#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0) +#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1) +#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3) +#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8) +#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB) + +#define UNIPRO_CB_OFFSET(x) (0x8000 | x) + /* * PHY Adpater attributes */ @@ -110,6 +144,11 @@ #define PA_STALLNOCONFIGTIME 0x15A3 #define PA_SAVECONFIGTIME 0x15A4 +/*Other attributes*/ +#define VS_MPHYCFGUPDT 0xD085 +#define VS_DEBUGOMC 0xD09E +#define VS_POWERSTATE 0xD083 + /* PA power modes */ enum { FAST_MODE = 1, -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html