On Tue, Jan 19, 2016 at 11:58:06AM +0000, Singhal, Maneesh wrote: > Hello, > Kindly review the following patch for the following driver to be added in SCSI subsystem - > > Regards > Maneesh > > ---------------------------------------------------------------------------- > >From f3c4b836d6f130b1d7ded618002c8164f8f4a06d Mon Sep 17 00:00:00 2001 > From: "maneesh.singhal" <maneesh.singhal@xxxxxxx> > Date: Tue, 19 Jan 2016 06:39:35 -0500 > Subject: [PATCH] [PATCH] drivers/scsi/emcctd: Client driver implementation for > EMC-Symmetrix GuestOS emulated Cut-Through Device. > > The patch is a driver implementation EMC-Symmetrix GuestOS emulated Cut-Through > Device. The Cut-Through Device PCI emulation is implemented for GuestOS > environments in the HyperMax OS. GuestOS environments allows loading of > any x86 compliant operating systems like Linux/FreeBSD etc. > > The client driver is a SCSI HBA implementation which interfaces with SCSI > midlayer in the north-bound interfaces and connects with the emulated PCI device > on the south side. > > The PCI vendor ID:product ID for emulated Cut-Through Device is 0x1120:0x1B00. > > Signed-off-by: maneesh.singhal <maneesh.singhal@xxxxxxx> > --- > Documentation/scsi/emcctd.txt | 57 + > MAINTAINERS | 9 + > drivers/scsi/Kconfig | 1 + > drivers/scsi/Makefile | 1 + > drivers/scsi/emcctd/Kconfig | 7 + > drivers/scsi/emcctd/Makefile | 1 + > drivers/scsi/emcctd/README | 10 + > drivers/scsi/emcctd/emc_ctd_interface.h | 386 +++++ > drivers/scsi/emcctd/emcctd.c | 2840 +++++++++++++++++++++++++++++++ > drivers/scsi/emcctd/emcctd.h | 232 +++ > 10 files changed, 3544 insertions(+) > create mode 100644 Documentation/scsi/emcctd.txt > create mode 100644 drivers/scsi/emcctd/Kconfig > create mode 100644 drivers/scsi/emcctd/Makefile > create mode 100644 drivers/scsi/emcctd/README > create mode 100644 drivers/scsi/emcctd/emc_ctd_interface.h > create mode 100644 drivers/scsi/emcctd/emcctd.c > create mode 100644 drivers/scsi/emcctd/emcctd.h > > diff --git a/Documentation/scsi/emcctd.txt b/Documentation/scsi/emcctd.txt > new file mode 100644 > index 0000000..bcafc87 > --- /dev/null > +++ b/Documentation/scsi/emcctd.txt > @@ -0,0 +1,56 @@ > +This file contains brief information about the EMC Cut-Through Driver (emcctd). > +The driver is currently maintained by Singhal, Maneesh (maneesh.singhal@xxxxxxx) > + > +Last modified: Mon Jan 18 2016 by Maneesh Singhal > + > +BASICS > + > +Its a client driver implementation for EMC-Symmetrix GuestOS emulated > +Cut-Through Device. The Cut-Through Device PCI emulation is implemented for > +GuestOS environments in the HyperMax OS. GuestOS environments allows loading of > +any x86 compliant operating systems like Linux/FreeBSD etc. > + > +The client driver is a SCSI HBA implementation which interfaces with SCSI > +midlayer in the north-bound interfaces and connects with the emulated PCI device > +on the south side. > + > +The PCI vendor ID:product ID for emulated Cut-Through Device is 0x1120:0x1B00. > + > +VERSIONING > + > +The Version of the driver is maintained as 2.0.0.X, where 2 refers to the CTD > +protocol in use, and X refers to the ongoing version of the driver. > + > + > +SYSFS SUPPORT > + > +The driver creates the directory /sys/module/emcctd and populates it with > +version file and a directory for various parameters as described in MODULE > +PARAMETERS section. > + > +PROCFS SUPPORT > + > +The driver creates the directory /proc/emc and creates files emcctd_stats_x > +where 'x' refers to the PCI emulation number this client driver connected to. > +These files cotains WWN information and IO statistics for the particular PCI > +emulation. No, no driver should be adding proc files, please use sysfs or debugfs for debugging things. > +MODULE PARAMETERS No driver should be using module parameters anymore, again, please use the correct interfaces. > + > +The supported parameters which could add debuggability or change the runtime > +behavior of the driver are as following: > + > +ctd_debug=0 | 1 Enable driver debug messages(0=off, 1=on) Use the dynamic debugging interface, don't make a custom one just for your tiny, single, driver. > + > +max_luns=xx Specify the maximum number of LUN's per > + host(default=16384) Why can't this be dynamic? Why do you need a static number? > + > +cmd_per_lun=xx Specify the maximum commands per lun(default=16) Why do you need to change this? Why can't it be dynamic? > + > +DEBUGGING HINTS > + > +Debugging code is now compiled in by default but debugging is turned off > +with the kernel module parameter debug_flag defaulting to 0. Again, no, use the dynamic debug interface, don't make something "special" just for a single driver, we spent a lot of time trying to unify everything, don't go backwards. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
