I left the log of the failure to partition out
Here it is
# mt -f /dev/nst0 mkpartition 1
/dev/nst0: Input/output error
[ 5499.341648] st 0:0:0:0: [st0] Block limits 1 - 16777215 bytes.
[ 5499.342903] st 0:0:0:0: [st0] Mode sense. Length 11, medium 0, WBS 10, BLL 8
[ 5499.343523] st 0:0:0:0: [st0] Density 58, tape length: 0, drv buffer: 1
[ 5499.344114] st 0:0:0:0: [st0] Block size: 512, buffer size: 4096 (8 blocks).
[ 5499.344702] st 0:0:0:0: [st0] Loading tape.
[ 5499.359733] st 0:0:0:0: [st0] Block limits 1 - 16777215 bytes.
[ 5499.360970] st 0:0:0:0: [st0] Mode sense. Length 11, medium 0, WBS 10, BLL 8
[ 5499.361584] st 0:0:0:0: [st0] Density 58, tape length: 0, drv buffer: 1
[ 5499.362165] st 0:0:0:0: [st0] Block size: 512, buffer size: 4096 (8 blocks).
[ 5499.363851] st 0:0:0:0: [st0] Partition page length is 10 bytes.
[ 5499.364468] st 0:0:0:0: [st0] PP: max 0, add 0, xdp 0, psum 03, pofmetc 0,rec 03, units 09, sizes: 1541 65535
[ 5499.365074] st 0:0:0:0: [st0] MP: 11 08 00 00 18 03 09 00 06 05 ff ff
[ 5499.365658] st 0:0:0:0: [st0] psd_cnt 2, max.parts 0, nbr_parts 0
[ 5499.366246] st 0:0:0:0: [st0] Formatting tape with two partitions (FDP).
[ 5499.366826] st 0:0:0:0: [st0] Sent partition page length is 12 bytes. needs_format: 0
[ 5499.367424] st 0:0:0:0: [st0] PP: max 0, add 1, xdp 4, psum 03, pofmetc 0 rec 03, units 00, sizes: 65535 65535
[ 5499.368024] st 0:0:0:0: [st0] MP: 11 0a 00 01 98 03 00 00 ff ff ff ff
[ 5499.369842] st 0:0:0:0: [st0] Error: 8000002, cmd: 15 10 0 0 18 0
[ 5499.370495] st 0:0:0:0: [st0] Sense Key : Illegal Request [current]
[ 5499.371109] st 0:0:0:0: [st0] Add. Sense: Invalid field in parameter list
[ 5499.371714] st 0:0:0:0: [st0] Partitioning of tape failed.
Laurence Oberman
Principal Software Maintenance Engineer
Red Hat Global Support Services
----- Original Message -----
From: "Laurence Oberman" <loberman@xxxxxxxxxx>
To: "Emmanuel Florac" <eflorac@xxxxxxxxxxxxxx>
Cc: "Laurence Oberman" <oberman.l@xxxxxxxxx>, "Kai Makisara" <Kai.Makisara@xxxxxxxxxxx>, linux-scsi@xxxxxxxxxxxxxxx
Sent: Wednesday, January 6, 2016 10:23:34 AM
Subject: Re: st driver doesn't seem to grok LTO partitioning
Hello Emanuel
I am using this device, its an Ultrium 5 (LTO5)
Its an older changer and I am unable to update the firmware, still working on that.
What version of mt are you using, as I am testing using a RHEL7.2 base and the upstream patched kernel.
Linux example.redhat.com 4.3.3 #1 SMP Tue Jan 5 15:58:47 EST 2016 x86_64 x86_64 x86_64 GNU/Linux
# tapeinfo -f /dev/st0
Product Type: Tape Drive
Vendor ID: 'QUANTUM '
Product ID: 'ULTRIUM 5 '
Revision: '3060'
Attached Changer API: No
SerialNumber: 'HU1023AKHE'
MinBlock: 1
MaxBlock: 16777215
SCSI ID: 0
SCSI LUN: 0
Ready: yes
BufferedMode: yes
Medium Type: Not Loaded
Density Code: 0x58
BlockSize: 512
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0x1
DeCompType: 0x1
BOP: yes
Block Position: 0
Partition 0 Remaining Kbytes: 1541692
Partition 0 Size in Kbytes: 1541692
ActivePartition: 0
EarlyWarningSize: 0
NumPartitions: 0
MaxPartitions: 0
Drive is working fine,
# mt -f /dev/st0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 512 bytes. Density code 0x58 (no translation).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
This is what I get when I try and partition and I believe this may be a firmware issue for me.
mt -f /dev/st0 stsetoption can-partitions
[ 5343.620005] st 0:0:0:0: [st0] Block limits 1 - 16777215 bytes.
[ 5343.621424] st 0:0:0:0: [st0] Mode sense. Length 11, medium 0, WBS 10, BLL 8
[ 5343.622005] st 0:0:0:0: [st0] Density 58, tape length: 0, drv buffer: 1
[ 5343.622606] st 0:0:0:0: [st0] Block size: 512, buffer size: 4096 (8 blocks).
[ 5343.623208] st 0:0:0:0: [st0] Mode 0 options: buffer writes: 1, async writes: 1, read ahead: 1
[ 5343.623810] st 0:0:0:0: [st0] can bsr: 1, two FMs: 0, fast mteom: 0, auto lock: 0,
[ 5343.624413] st 0:0:0:0: [st0] defs for wr: 0, no block limits: 0, partitions: 1, s2 log: 0
[ 5343.625011] st 0:0:0:0: [st0] sysv: 0 nowait: 0 sili: 0 nowait_filemark: 0
[ 5343.625623] st 0:0:0:0: [st0] debugging: 1
[ 5343.626222] st 0:0:0:0: [st0] Rewinding tape.
# mt -f /dev/nst0 mkpartition 1
/dev/nst0: Input/output error
Laurence Oberman
Principal Software Maintenance Engineer
Red Hat Global Support Services
----- Original Message -----
From: "Emmanuel Florac" <eflorac@xxxxxxxxxxxxxx>
To: "Laurence Oberman" <loberman@xxxxxxxxxx>
Cc: "Laurence Oberman" <oberman.l@xxxxxxxxx>, "Kai Makisara" <Kai.Makisara@xxxxxxxxxxx>, linux-scsi@xxxxxxxxxxxxxxx
Sent: Wednesday, January 6, 2016 10:10:49 AM
Subject: Re: st driver doesn't seem to grok LTO partitioning
Le Tue, 5 Jan 2016 16:55:04 -0500 (EST)
Laurence Oberman <loberman@xxxxxxxxxx> écrivait:
> mt -f /dev/nst0 mkpartition 1
>
What is the type of drive exactly? I still couldn't test with the LTO-5
drive as the machine it's connected to is being reinstalled.
--
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <eflorac@xxxxxxxxxxxxxx>
| +33 1 78 94 84 02
------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
