Make use of do_reset() in the bus reset handler in atari_NCR5380.c. The
version in NCR5380.c already does so. Keep them in sync.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
Tested-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
Tested-by: Michael Schmitz <schmitzmic@xxxxxxxxx>
---
Bus reset handlers in both core drivers still have serious problems for
EH purposes. Those problems are addressed later in this series.
---
drivers/scsi/NCR5380.c | 20 +++++++++++---------
drivers/scsi/atari_NCR5380.c | 30 ++++++++++++------------------
2 files changed, 23 insertions(+), 27 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:12.000000000 +1100
@@ -668,7 +668,7 @@ static void prepare_info(struct Scsi_Hos
* Locks: called functions disable irqs
*/
-static void NCR5380_print_status(struct Scsi_Host *instance)
+static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
{
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
@@ -2693,24 +2693,26 @@ static int NCR5380_abort(struct scsi_cmn
}
-/*
- * Function : int NCR5380_bus_reset (struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS
+/**
+ * NCR5380_bus_reset - reset the SCSI bus
+ * @cmd: SCSI command undergoing EH
*
- * Locks: host lock taken by caller
+ * Returns SUCCESS
*/
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
+ spin_lock_irq(instance->host_lock);
+
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
NCR5380_print_status(instance);
+#endif
- spin_lock_irq(instance->host_lock);
do_reset(instance);
+
spin_unlock_irq(instance->host_lock);
return SUCCESS;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:12.000000000 +1100
@@ -719,7 +719,7 @@ static void lprint_Scsi_Cmnd(struct scsi
printk("\n");
}
-static void NCR5380_print_status(struct Scsi_Host *instance)
+static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
struct scsi_cmnd *ptr;
@@ -2982,13 +2982,11 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
}
-/*
- * Function : int NCR5380_reset (struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS or FAILURE
+/**
+ * NCR5380_bus_reset - reset the SCSI bus
+ * @cmd: SCSI command undergoing EH
*
+ * Returns SUCCESS
*/
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
@@ -2998,22 +2996,19 @@ static int NCR5380_bus_reset(struct scsi
int i;
unsigned long flags;
+ local_irq_save(flags);
+
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
NCR5380_print_status(instance);
+#endif
+
+ do_reset(instance);
- /* get in phase */
- NCR5380_write(TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
- /* assert RST */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- udelay(40);
/* reset NCR registers */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
- /* ++roman: reset interrupt condition! otherwise no interrupts don't get
- * through anymore ... */
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
/* After the reset, there are no more connected or disconnected commands
* and no busy units; so clear the low-level status here to avoid
@@ -3028,7 +3023,6 @@ static int NCR5380_bus_reset(struct scsi
if (hostdata->disconnected_queue)
dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
- local_irq_save(flags);
hostdata->issue_queue = NULL;
hostdata->connected = NULL;
hostdata->disconnected_queue = NULL;
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
