From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
Add I/O register mapping for NCR53C400A and enable PDMA mode to
improve performance and fix non-working IRQ.
Tested with HP C2502 (and user-space enabler).
Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
---
Changes to Ondrej's version:
- An 'if' statement is now a 'switch' statement.
- Throw an error if MMIO register locations are not known.
---
drivers/scsi/g_NCR5380.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:51.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:53.000000000 +1100
@@ -323,7 +323,7 @@ static int __init generic_NCR5380_detect
#endif
break;
case BOARD_NCR53C400A:
- flags = FLAG_NO_PSEUDO_DMA;
+ flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
break;
case BOARD_DTC3181E:
@@ -405,27 +405,42 @@ static int __init generic_NCR5380_detect
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
* the base address.
*/
- if (overrides[current_override].board == BOARD_NCR53C400) {
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
instance->io_port += 8;
hostdata->c400_ctl_status = 0;
hostdata->c400_blk_cnt = 1;
hostdata->c400_host_buf = 4;
+ break;
+ case BOARD_NCR53C400A:
+ hostdata->c400_ctl_status = 9;
+ hostdata->c400_blk_cnt = 10;
+ hostdata->c400_host_buf = 8;
+ break;
}
#else
instance->base = overrides[current_override].NCR5380_map_name;
hostdata->iomem = iomem;
- if (overrides[current_override].board == BOARD_NCR53C400) {
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
hostdata->c400_ctl_status = 0x100;
hostdata->c400_blk_cnt = 0x101;
hostdata->c400_host_buf = 0x104;
+ break;
+ case BOARD_NCR53C400A:
+ pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
+ goto out_unregister;
}
#endif
if (NCR5380_init(instance, flags))
goto out_unregister;
- if (overrides[current_override].board == BOARD_NCR53C400)
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
+ case BOARD_NCR53C400A:
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ }
NCR5380_maybe_reset_bus(instance);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
