When we receive a unit attention code of 'ALUA state changed'
we should recheck the state, as it might be due to an implicit
ALUA state transition. This allows us to return NEEDS_RETRY
instead of ADD_TO_MLQUEUE, allowing to terminate the retries
after a certain time.
At the same time a workqueue item might already be queued, which
should be started immediately to avoid any delays.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 58 ++++++++++++++++++++++++------
1 file changed, 47 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 525449f..04a3a543 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -121,7 +121,8 @@ struct alua_queue_data {
static void alua_rtpg_work(struct work_struct *work);
static void alua_rtpg_queue(struct alua_port_group *pg,
struct scsi_device *sdev,
- struct alua_queue_data *qdata);
+ struct alua_queue_data *qdata, bool force);
+static void alua_check(struct scsi_device *sdev, bool force);
static void release_port_group(struct kref *kref)
{
@@ -386,7 +387,7 @@ static int alua_check_vpd(struct scsi_device *sdev, struct alua_dh_data *h,
rcu_assign_pointer(h->pg, pg);
pg_found = true;
}
- alua_rtpg_queue(h->pg, sdev, NULL);
+ alua_rtpg_queue(h->pg, sdev, NULL, true);
spin_unlock(&h->pg_lock);
if (pg_found)
@@ -427,18 +428,24 @@ static int alua_check_sense(struct scsi_device *sdev,
{
switch (sense_hdr->sense_key) {
case NOT_READY:
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a)
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) {
/*
* LUN Not Accessible - ALUA state transition
*/
- return ADD_TO_MLQUEUE;
+ alua_check(sdev, false);
+ return NEEDS_RETRY;
+ }
break;
case UNIT_ATTENTION:
- if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+ if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) {
/*
- * Power On, Reset, or Bus Device Reset, just retry.
+ * Power On, Reset, or Bus Device Reset.
+ * Might have obscured a state transition,
+ * so schedule a recheck.
*/
+ alua_check(sdev, true);
return ADD_TO_MLQUEUE;
+ }
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x04)
/*
* Device internal reset
@@ -449,16 +456,20 @@ static int alua_check_sense(struct scsi_device *sdev,
* Mode Parameters Changed
*/
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06)
+ if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
/*
* ALUA state changed
*/
+ alua_check(sdev, true);
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07)
+ }
+ if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
/*
* Implicit ALUA state transition failed
*/
+ alua_check(sdev, true);
return ADD_TO_MLQUEUE;
+ }
if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x03)
/*
* Inquiry data has changed
@@ -777,7 +788,7 @@ static void alua_rtpg_work(struct work_struct *work)
static void alua_rtpg_queue(struct alua_port_group *pg,
struct scsi_device *sdev,
- struct alua_queue_data *qdata)
+ struct alua_queue_data *qdata, bool force)
{
int start_queue = 0;
unsigned long flags;
@@ -797,7 +808,9 @@ static void alua_rtpg_queue(struct alua_port_group *pg,
pg->rtpg_sdev = sdev;
scsi_device_get(sdev);
start_queue = 1;
- }
+ } else if (!(pg->flags & ALUA_PG_RUN_RTPG) && force)
+ start_queue = 1;
+
spin_unlock_irqrestore(&pg->lock, flags);
if (start_queue &&
@@ -912,7 +925,7 @@ static int alua_activate(struct scsi_device *sdev,
kref_get(&pg->kref);
rcu_read_unlock();
- alua_rtpg_queue(pg, sdev, qdata);
+ alua_rtpg_queue(pg, sdev, qdata, true);
kref_put(&pg->kref, release_port_group);
out:
if (fn)
@@ -921,6 +934,29 @@ out:
}
/*
+ * alua_check - check path status
+ * @sdev: device on the path to be checked
+ *
+ * Check the device status
+ */
+static void alua_check(struct scsi_device *sdev, bool force)
+{
+ struct alua_dh_data *h = sdev->handler_data;
+ struct alua_port_group *pg;
+
+ rcu_read_lock();
+ pg = rcu_dereference(h->pg);
+ if (!pg) {
+ rcu_read_unlock();
+ return;
+ }
+ kref_get(&pg->kref);
