From: Jitendra <jitendra.bhivare@xxxxxxxxxxxxx>
Async link event provides port_speed info. Use the same to report in
ISCSI_HOST_PARAM_PORT_SPEED query. Removed link status query IOCTL used
to do the same.
25G and 40G are defined in kernel enum iscsi_port_speed.
Fixed get_nic_conf structure definition. Removed rsvd[23] field in
be_cmd_get_nic_conf_resp.
Signed-off-by: Jitendra <jitendra.bhivare@xxxxxxxxxxxxx>
---
drivers/scsi/be2iscsi/be_cmds.c | 47 ++++++++++++-------------
drivers/scsi/be2iscsi/be_cmds.h | 65 ++++++++++------------------------
drivers/scsi/be2iscsi/be_iscsi.c | 41 +++++----------------
drivers/scsi/be2iscsi/be_main.h | 1 +
drivers/scsi/be2iscsi/be_mgmt.c | 28 ---------------
drivers/scsi/scsi_transport_iscsi.c | 2 +
include/scsi/iscsi_if.h | 2 +
7 files changed, 57 insertions(+), 129 deletions(-)
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 3dbf6af..498eba2 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -402,31 +402,31 @@ void beiscsi_fail_session(struct iscsi_cls_session *cls_session)
iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
}
-static void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
- struct be_async_event_link_state *evt)
+static void beiscsi_process_async_link(struct beiscsi_hba *phba,
+ struct be_mcc_compl *compl)
{
- if ((evt->port_link_status == ASYNC_EVENT_LINK_DOWN) ||
- ((evt->port_link_status & ASYNC_EVENT_LOGICAL) &&
- (evt->port_fault != BEISCSI_PHY_LINK_FAULT_NONE))) {
- phba->state = BE_ADAPTER_LINK_DOWN;
+ struct be_async_event_link_state *evt;
- beiscsi_log(phba, KERN_ERR,
- BEISCSI_LOG_CONFIG | BEISCSI_LOG_INIT,
- "BC_%d : Link Down on Port %d\n",
- evt->physical_port);
+ evt = (struct be_async_event_link_state *)compl;
- iscsi_host_for_each_session(phba->shost,
- beiscsi_fail_session);
- } else if ((evt->port_link_status & ASYNC_EVENT_LINK_UP) ||
- ((evt->port_link_status & ASYNC_EVENT_LOGICAL) &&
- (evt->port_fault == BEISCSI_PHY_LINK_FAULT_NONE))) {
+ phba->port_speed = evt->port_speed;
+ /**
+ * Check logical link status in ASYNC event.
+ * This has been newly introduced in SKH-R Firmware 10.0.338.45.
+ **/
+ if (evt->port_link_status & BE_ASYNC_LINK_UP_MASK) {
phba->state = BE_ADAPTER_LINK_UP | BE_ADAPTER_CHECK_BOOT;
phba->get_boot = BE_GET_BOOT_RETRIES;
-
- beiscsi_log(phba, KERN_ERR,
- BEISCSI_LOG_CONFIG | BEISCSI_LOG_INIT,
- "BC_%d : Link UP on Port %d\n",
- evt->physical_port);
+ __beiscsi_log(phba, KERN_ERR,
+ "BC_%d : Link Up on Port %d tag 0x%x\n",
+ evt->physical_port, evt->event_tag);
+ } else {
+ phba->state = BE_ADAPTER_LINK_DOWN;
+ __beiscsi_log(phba, KERN_ERR,
+ "BC_%d : Link Down on Port %d tag 0x%x\n",
+ evt->physical_port, evt->event_tag);
+ iscsi_host_for_each_session(phba->shost,
+ beiscsi_fail_session);
}
}
@@ -503,8 +503,7 @@ void beiscsi_process_async_event(struct beiscsi_hba *phba,
evt_code &= ASYNC_TRAILER_EVENT_CODE_MASK;
switch (evt_code) {
case ASYNC_EVENT_CODE_LINK_STATE:
- beiscsi_async_link_state_process(phba,
- (struct be_async_event_link_state *)compl);
+ beiscsi_process_async_link(phba, compl);
break;
case ASYNC_EVENT_CODE_ISCSI:
phba->state |= BE_ADAPTER_CHECK_BOOT;
@@ -520,8 +519,8 @@ void beiscsi_process_async_event(struct beiscsi_hba *phba,
}
beiscsi_log(phba, sev, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
- "BC_%d : ASYNC Event: status 0x%08x flags 0x%08x\n",
- compl->status, compl->flags);
+ "BC_%d : ASYNC Event %x: status 0x%08x flags 0x%08x\n",
+ evt_code, compl->status, compl->flags);
}
int beiscsi_process_mcc(struct beiscsi_hba *phba)
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 6411f7b..3b9bc2e 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -142,7 +142,6 @@ struct be_async_event_trailer {
enum {
ASYNC_EVENT_LINK_DOWN = 0x0,
ASYNC_EVENT_LINK_UP = 0x1,
- ASYNC_EVENT_LOGICAL = 0x2
};
/**
@@ -152,13 +151,26 @@ enum {
struct be_async_event_link_state {
u8 physical_port;
u8 port_link_status;
+/**
+ * ASYNC_EVENT_LINK_DOWN 0x0
+ * ASYNC_EVENT_LINK_UP 0x1
+ * ASYNC_EVENT_LINK_LOGICAL_DOWN 0x2
+ * ASYNC_EVENT_LINK_LOGICAL_UP 0x3
+ */
+#define BE_ASYNC_LINK_UP_MASK 0x01
u8 port_duplex;
u8 port_speed;
-#define BEISCSI_PHY_LINK_FAULT_NONE 0x00
-#define BEISCSI_PHY_LINK_FAULT_LOCAL 0x01
-#define BEISCSI_PHY_LINK_FAULT_REMOTE 0x02
+/* BE2ISCSI_LINK_SPEED_ZERO 0x00 - no link */
+#define BE2ISCSI_LINK_SPEED_10MBPS 0x01
+#define BE2ISCSI_LINK_SPEED_100MBPS 0x02
+#define BE2ISCSI_LINK_SPEED_1GBPS 0x03
+#define BE2ISCSI_LINK_SPEED_10GBPS 0x04
+#define BE2ISCSI_LINK_SPEED_25GBPS 0x06
+#define BE2ISCSI_LINK_SPEED_40GBPS 0x07
u8 port_fault;
- u8 rsvd0[7];
+ u8 event_reason;
+ u16 qos_link_speed;
+ u32 event_tag;
struct be_async_event_trailer trailer;
} __packed;
@@ -675,20 +687,6 @@ struct be_cmd_req_modify_eq_delay {
/******************** Get MAC ADDR *******************/
-#define ETH_ALEN 6
-
-struct be_cmd_get_nic_conf_req {
- struct be_cmd_req_hdr hdr;
- u32 nic_port_count;
- u32 speed;
- u32 max_speed;
- u32 link_state;
- u32 max_frame_size;
- u16 size_of_structure;
- u8 mac_address[ETH_ALEN];
- u32 rsvd[23];
-};
-
struct be_cmd_get_nic_conf_resp {
struct be_cmd_resp_hdr hdr;
u32 nic_port_count;
@@ -697,9 +695,8 @@ struct be_cmd_get_nic_conf_resp {
u32 link_state;
u32 max_frame_size;
u16 size_of_structure;
- u8 mac_address[6];
- u32 rsvd[23];
-};
+ u8 mac_address[ETH_ALEN];
+} __packed;
#define BEISCSI_ALIAS_LEN 32
@@ -711,29 +708,6 @@ struct be_cmd_hba_name {
u8 initiator_alias[BEISCSI_ALIAS_LEN];
} __packed;
-struct be_cmd_ntwk_link_status_req {
- struct be_cmd_req_hdr hdr;
- u32 rsvd0;
-} __packed;
-
-/*** Port Speed Values ***/
-#define BE2ISCSI_LINK_SPEED_ZERO 0x00
-#define BE2ISCSI_LINK_SPEED_10MBPS 0x01
-#define BE2ISCSI_LINK_SPEED_100MBPS 0x02
-#define BE2ISCSI_LINK_SPEED_1GBPS 0x03
-#define BE2ISCSI_LINK_SPEED_10GBPS 0x04
-struct be_cmd_ntwk_link_status_resp {
- struct be_cmd_resp_hdr hdr;
- u8 phys_port;
- u8 mac_duplex;
- u8 mac_speed;
- u8 mac_fault;
- u8 mgmt_mac_duplex;
- u8 mgmt_mac_speed;
- u16 qos_link_speed;
- u32 logical_link_speed;
-} __packed;
-
int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
struct be_queue_info *eq, int eq_delay);
@@ -752,7 +726,6 @@ int be_poll_mcc(struct be_ctrl_info *ctrl);
int mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
struct beiscsi_hba *phba);
unsigned int be_cmd_get_initname(struct beiscsi_hba *phba);
-unsigned int be_cmd_get_port_speed(struct beiscsi_hba *phba);
void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag);
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 3545721..9eef68b 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -758,7 +758,7 @@ static void beiscsi_get_port_state(struct Scsi_Host *shost)
struct beiscsi_hba *phba = iscsi_host_priv(shost);
struct iscsi_cls_host *ihost = shost->shost_data;
- ihost->port_state = (phba->state == BE_ADAPTER_LINK_UP) ?
+ ihost->port_state = (phba->state & BE_ADAPTER_LINK_UP) ?
ISCSI_PORT_STATE_UP : ISCSI_PORT_STATE_DOWN;
}
@@ -766,34 +766,13 @@ static void beiscsi_get_port_state(struct Scsi_Host *shost)
* beiscsi_get_port_speed - Get the Port Speed from Adapter
* @shost : pointer to scsi_host structure
*
- * returns Success/Failure
*/
-static int beiscsi_get_port_speed(struct Scsi_Host *shost)
+static void beiscsi_get_port_speed(struct Scsi_Host *shost)
{
- int rc;
- unsigned int tag;
- struct be_mcc_wrb *wrb;
- struct be_cmd_ntwk_link_status_resp *resp;
struct beiscsi_hba *phba = iscsi_host_priv(shost);
struct iscsi_cls_host *ihost = shost->shost_data;
- tag = be_cmd_get_port_speed(phba);
- if (!tag) {
- beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
- "BS_%d : Getting Port Speed Failed\n");
-
- return -EBUSY;
- }
- rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
- if (rc) {
- beiscsi_log(phba, KERN_ERR,
- BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
- "BS_%d : Port Speed MBX Failed\n");
- return rc;
- }
- resp = embedded_payload(wrb);
-
- switch (resp->mac_speed) {
+ switch (phba->port_speed) {
case BE2ISCSI_LINK_SPEED_10MBPS:
ihost->port_speed = ISCSI_PORT_SPEED_10MBPS;
break;
@@ -806,10 +785,15 @@ static int beiscsi_get_port_speed(struct Scsi_Host *shost)
case BE2ISCSI_LINK_SPEED_10GBPS:
ihost->port_speed = ISCSI_PORT_SPEED_10GBPS;
break;
+ case BE2ISCSI_LINK_SPEED_25GBPS:
+ ihost->port_speed = ISCSI_PORT_SPEED_25GBPS;
+ break;
+ case BE2ISCSI_LINK_SPEED_40GBPS:
+ ihost->port_speed = ISCSI_PORT_SPEED_40GBPS;
+ break;
default:
ihost->port_speed = ISCSI_PORT_SPEED_UNKNOWN;
}
- return 0;
}
/**
@@ -859,12 +843,7 @@ int beiscsi_get_host_param(struct Scsi_Host *shost,
status = sprintf(buf, "%s\n", iscsi_get_port_state_name(shost));
break;
case ISCSI_HOST_PARAM_PORT_SPEED:
- status = beiscsi_get_port_speed(shost);
- if (status) {
- beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
- "BS_%d : Retreiving Port Speed Failed\n");
- return status;
- }
+ beiscsi_get_port_speed(shost);
status = sprintf(buf, "%s\n", iscsi_get_port_speed_name(shost));
break;
default:
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index fabade3..41c708c 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -427,6 +427,7 @@ struct beiscsi_hba {
bool mac_addr_set;
u8 mac_address[ETH_ALEN];
u8 port_name;
+ u8 port_speed;
char fw_ver_str[BEISCSI_VER_STRLEN];
char wq_name[20];
struct workqueue_struct *wq; /* The actuak work queue */
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 15f7ad7..5c66f44 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1382,34 +1382,6 @@ unsigned int be_cmd_get_initname(struct beiscsi_hba *phba)
return tag;
}
-unsigned int be_cmd_get_port_speed(struct beiscsi_hba *phba)
-{
- unsigned int tag = 0;
- struct be_mcc_wrb *wrb;
- struct be_cmd_ntwk_link_status_req *req;
- struct be_ctrl_info *ctrl = &phba->ctrl;
-
- if (mutex_lock_interruptible(&ctrl->mbox_lock))
- return 0;
- tag = alloc_mcc_tag(phba);
- if (!tag) {
- mutex_unlock(&ctrl->mbox_lock);
- return tag;
- }
-
- wrb = wrb_from_mccq(phba);
- req = embedded_payload(wrb);
- wrb->tag0 |= tag;
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_LINK_STATUS_QUERY,
- sizeof(*req));
-
- be_mcc_notify(phba);
- mutex_unlock(&ctrl->mbox_lock);
- return tag;
-}
-
/**
* be_mgmt_get_boot_shandle()- Get the session handle
* @phba: device priv structure instance
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index e4b3d8f..4414816 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -4308,6 +4308,8 @@ static const struct {
{ISCSI_PORT_SPEED_100MBPS, "100 Mbps" },
{ISCSI_PORT_SPEED_1GBPS, "1 Gbps" },
{ISCSI_PORT_SPEED_10GBPS, "10 Gbps" },
+ {ISCSI_PORT_SPEED_25GBPS, "25 Gbps" },
+ {ISCSI_PORT_SPEED_40GBPS, "40 Gbps" },
};
char *iscsi_get_port_speed_name(struct Scsi_Host *shost)
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index 95ed942..d66c070 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -724,6 +724,8 @@ enum iscsi_port_speed {
ISCSI_PORT_SPEED_100MBPS = 0x4,
ISCSI_PORT_SPEED_1GBPS = 0x8,
ISCSI_PORT_SPEED_10GBPS = 0x10,
+ ISCSI_PORT_SPEED_25GBPS = 0x20,
+ ISCSI_PORT_SPEED_40GBPS = 0x40,
};
/* iSCSI port state */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
