On Tue, 2015-12-01 at 10:16 +0100, Hannes Reinecke wrote:
> Most sense code is already handled in the generic
> code, so we shouldn't be adding special cases here.
> However, when doing so we need to check for
> unit attention whenever we're sending an internal
> command.
>
> Reviewed-by: Ewan Milne <emilne@xxxxxxxxxx>
> Reviewed-by: Christoph Hellwig <hch@xxxxxx>
> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
> ---
> drivers/scsi/device_handler/scsi_dh_alua.c | 45 +++++++++++-----------------
> --
> 1 file changed, 17 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c
> b/drivers/scsi/device_handler/scsi_dh_alua.c
> index c9751c9..abf05b4 100644
> --- a/drivers/scsi/device_handler/scsi_dh_alua.c
> +++ b/drivers/scsi/device_handler/scsi_dh_alua.c
> @@ -85,7 +85,6 @@ struct alua_dh_data {
> #define ALUA_POLICY_SWITCH_ALL 1
>
> static char print_alua_state(int);
> -static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *);
>
> static int realloc_buffer(struct alua_dh_data *h, unsigned len)
> {
> @@ -189,8 +188,13 @@ static void stpg_endio(struct request *req, int error)
>
> if (scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
> &sense_hdr)) {
> - err = alua_check_sense(h->sdev, &sense_hdr);
> - if (err == ADD_TO_MLQUEUE) {
> + if (sense_hdr.sense_key == NOT_READY &&
> + sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) {
> + /* ALUA state transition already in progress */
> + err = SCSI_DH_OK;
> + goto done;
> + }
> + if (sense_hdr.sense_key == UNIT_ATTENTION) {
> err = SCSI_DH_RETRY;
> goto done;
> }
> @@ -399,28 +403,6 @@ static int alua_check_sense(struct scsi_device *sdev,
> * LUN Not Accessible - ALUA state transition
> */
> return ADD_TO_MLQUEUE;
> - if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
> - /*
> - * LUN Not Accessible -- Target port in standby
> state
> - */
> - return SUCCESS;
> - if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c)
> - /*
> - * LUN Not Accessible -- Target port in unavailable
> state
> - */
> - return SUCCESS;
> - if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12)
> - /*
> - * LUN Not Ready -- Offline
> - */
> - return SUCCESS;
> - if (sdev->allow_restart &&
> - sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02)
> - /*
> - * if the device is not started, we need to wake
> - * the error handler to start the motor
> - */
> - return FAILED;
> break;
> case UNIT_ATTENTION:
> if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
> @@ -517,9 +499,16 @@ static int alua_rtpg(struct scsi_device *sdev, struct
> alua_dh_data *h, int wait_
> h->flags |= ALUA_RTPG_EXT_HDR_UNSUPP;
> goto retry;
> }
> -
> - err = alua_check_sense(sdev, &sense_hdr);
> - if (err == ADD_TO_MLQUEUE && time_before(jiffies, expiry)) {
> + /*
> + * Retry on ALUA state transition or if any
> + * UNIT ATTENTION occurred.
> + */
> + if (sense_hdr.sense_key == NOT_READY &&
> + sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
> + err = SCSI_DH_RETRY;
> + else if (sense_hdr.sense_key == UNIT_ATTENTION)
> + err = SCSI_DH_RETRY;
> + if (err == SCSI_DH_RETRY && time_before(jiffies, expiry)) {
> sdev_printk(KERN_ERR, sdev, "%s: rtpg retry\n",
> ALUA_DH_NAME);
> scsi_print_sense_hdr(sdev, ALUA_DH_NAME,
> &sense_hdr);
Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
