On Wednesday 25 November 2015 04:17:09 Finn Thain wrote:
>
> On Tue, 24 Nov 2015, Ondrej Zary wrote:
>
> > On Wednesday 18 November 2015 09:35:17 Finn Thain wrote:
> > > Linux v2.1.105 changed the algorithm for polling for the BSY signal
> > > in NCR5380_select() and NCR5380_main().
> > >
> > > Presently, this code has a bug. Back then, NCR5380_set_timer(hostdata, 1)
> > > meant reschedule main() after sleeping for 10 ms. Repeated 25 times this
> > > provided the recommended 250 ms selection time-out delay. This got broken
> > > when HZ became configurable.
> > >
> > > We could fix this but there's no need to reschedule the main loop. This
> > > BSY polling presently happens when the NCR5380_main() work queue item
> > > calls NCR5380_select(), which in turn schedules NCR5380_main(), which
> > > calls NCR5380_select() again, and so on.
> > >
> > > This algorithm is a deviation from the simpler one in atari_NCR5380.c.
> > > The extra complexity and state is pointless. There's no reason to
> > > stop selection half-way and return to to the main loop when the main
> > > loop can do nothing useful until selection completes.
> > >
> > > So just poll for BSY. We can sleep while polling now that we have a
> > > suitable workqueue.
> >
> > Bisecting slow module initialization pointed to this commit.
>
> That's disappointing. This patch removed some nasty code. Anyway, thanks
> for taking the trouble to bisect.
>
> >
> > Before this commit (2 seconds):
> > [ 60.317374] scsi host2: Generic NCR5380/NCR53C400 SCSI, io_port 0x0, n_io_port 0, base 0xd8000, irq 0, can_queue 16, cmd_per_lun 2, sg_tablesize 128, this_id 7, flags { NCR53C400 }, USLEEP_POLL 3, USLEEP_SLEEP 50, options { AUTOPROBE_IRQ PSEUDO_DMA }
> > [ 60.780715] scsi 2:0:1:0: Direct-Access QUANTUM LP240S GM240S01X 4.6 PQ: 0 ANSI: 2 CCS
> > [ 62.606260] sd 2:0:1:0: Attached scsi generic sg1 type 0
> >
> >
> > After this commit (22 seconds):
> > [ 137.511711] scsi host2: Generic NCR5380/NCR53C400 SCSI, io_port 0x0, n_io_port 0, base 0xd8000, irq 0, can_queue 16, cmd_per_lun 2, sg_tablesize 128, this_id 7, flags { NCR53C400 }, USLEEP_POLL 3, USLEEP_SLEEP 50, options { AUTOPROBE_IRQ PSEUDO_DMA }
> > [ 145.028532] clocksource: timekeeping watchdog: Marking clocksource 'tsc' as unstable because the skew is too large:
> > [ 145.029767] clocksource: 'acpi_pm' wd_now: a49738 wd_last: f4da04 mask: ffffff
> > [ 145.029828] clocksource: 'tsc' cs_now: 2ea624698e cs_last: 2c710aa17f mask: ffffffffffffffff
> > [ 145.032733] clocksource: Switched to clocksource acpi_pm
>
> I figured that it was okay to sleep from an unbound CPU-intensive
> workqueue but doing so seems to cause problems. (See also patch 66/71
> "Fix soft lockups".)
>
> Perhaps a kthread is needed instead of a workqueue? (This workqueue
> already has it's own kthread, but top shows that it doesn't accrue CPU
> time.)
>
> > [ 145.236951] scsi 2:0:1:0: Direct-Access QUANTUM LP240S GM240S01X 4.6 PQ: 0 ANSI: 2 CCS
> > [ 159.959308] sd 2:0:1:0: Attached scsi generic sg1 type 0
> >
> >
>
> This problem doesn't show up on my hardware, and I'd like to know where
> those 22 seconds are being spent. Would you please apply the entire series
> and add,
> #define NDEBUG (NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_MAIN)
> to the top of g_NCR5380.c and send me the messages logged during modprobe?
[ 397.014581] scsi host2: Generic NCR5380/NCR53C400 SCSI, io_port 0x0, n_io_port 0, base 0xd8000, irq 0, can_queue 16, cmd_per_lun 2, sg_tablesize 128, this_id 7, flags { NO_DMA_FIXUP }, options { AUTOPROBE_IRQ PSEUDO_DMA }
[ 412.099695] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 412.103625] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 412.110503] scsi 2:0:1:0: Direct-Access QUANTUM LP240S GM240S01X 4.6 PQ: 0 ANSI: 2 CCS
[ 412.110892] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 412.114154] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 412.119733] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 427.198108] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 442.276586] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 457.354592] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 472.432999] STATUS_REG: 00
BASR: 08
ICR: 00
MODE: 00
[ 487.513027] sd 2:0:1:0: Attached scsi generic sg1 type 0
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
