Re: kernel BUG at drivers/scsi/scsi_lib.c:1096!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/23/2015 10:21 AM, Ming Lei wrote:
On Mon, 23 Nov 2015 10:46:20 +0800
Ming Lei <ming.lei@xxxxxxxxxxxxx> wrote:

Hi Mark,

On Mon, Nov 23, 2015 at 9:50 AM, Mark Salter <msalter@xxxxxxxxxx> wrote:
On Mon, 2015-11-23 at 08:36 +0800, Ming Lei wrote:
On Mon, Nov 23, 2015 at 7:20 AM, Mark Salter <msalter@xxxxxxxxxx> wrote:
On Sun, 2015-11-22 at 00:56 +0800, Ming Lei wrote:
On Sat, 21 Nov 2015 12:30:14 +0100
Laurent Dufour <ldufour@xxxxxxxxxxxxxxxxxx> wrote:

On 20/11/2015 13:10, Michael Ellerman wrote:
On Thu, 2015-11-19 at 00:23 -0800, Christoph Hellwig wrote:

It's pretty much guaranteed a block layer bug, most likely in the
merge bios to request infrastucture where we don't obey the merging
limits properly.

Does either of you have a known good and first known bad kernel?

Not me, I've only hit it one or two times. All I can say is I have hit it in
4.4-rc1.

Laurent, can you narrow it down at all?

It seems that the panic is triggered by the commit bdced438acd8 ("block:
setup bi_phys_segments after splitting") which has been pulled by the
merge d9734e0d1ccf ("Merge branch 'for-4.4/core' of
git://git.kernel.dk/linux-block").

My system is panicing promptly when running a kernel built at
d9734e0d1ccf, while reverting the commit bdced438acd8, it can run hours
without panicing.

This being said, I can't explain what's going wrong.

May Ming shed some light here ?

Laurent, looks there is one bug in blk_bio_segment_split(), would you
mind testing the following patch to see if it fixes your issue?

---
 From 6fc701231dcc000bc8bc4b9105583380d9aa31f4 Mon Sep 17 00:00:00 2001
From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
Date: Sun, 22 Nov 2015 00:47:13 +0800
Subject: [PATCH] block: fix segment split

Inside blk_bio_segment_split(), previous bvec pointer('bvprvp')
always points to the iterator local variable, which is obviously
wrong, so fix it by pointing to the local variable of 'bvprv'.

Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxxxxx>
---
  block/blk-merge.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/block/blk-merge.c b/block/blk-merge.c
index de5716d8..f2efe8a 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -98,7 +98,7 @@ static struct bio *blk_bio_segment_split(struct request_queue *q,

                       seg_size += bv.bv_len;
                       bvprv = bv;
-                     bvprvp = &bv;
+                     bvprvp = &bvprv;
                       sectors += bv.bv_len >> 9;
                       continue;
               }
@@ -108,7 +108,7 @@ new_segment:

               nsegs++;
               bvprv = bv;
-             bvprvp = &bv;
+             bvprvp = &bvprv;
               seg_size = bv.bv_len;
               sectors += bv.bv_len >> 9;
       }

I'm still hitting the BUG even with this patch applied on top of 4.4-rc1.

OK, looks there are still other bugs, care to share us how to reproduce
it on arm64?

thanks,
Ming

Unfortunately, the best reproducer I have is to boot the platform. I have seen the
BUG a few times post-boot, but I don't have a consistant reproducer. I am using
upstream 4.4-rc1 with this config:

   http://people.redhat.com/msalter/fh_defconfig

With 4.4-rc1 on an APM Mustang platform, I see the BUG about once every 6-7 boots.
On an AMD Seattle platform, about every 9 boots.

Thanks for the input, and I will try to reproduce the issue on mustang with
your kernel config.

I can reproduce the issue on mustang, and looks I may understand the story now.

When 64K page size is used on arm64, and the default segment size of block
is 65536, then one segment should only include one page at most.

Commit bdced438acd83a(block: setup bi_phys_segments after splitting) does not
compute bio->bi_seg_front_size and bio->bi_seg_back_size, then one less segment
may be obtained because blk_phys_contig_segment() thought the last bvec in 1st
bio and the 1st bvec in the 2nd bio is in one physical segment, so cause the
regression.

Looks the following patch can fix the issue by figuring bio->bi_seg_front_size
and bio->bi_seg_back_size in blk_bio_segment_split().

Mark, thanks again for providing the reproduction steps, and could you run your
test to see if it can fix your issue?

---
 From 86b5f33d48715c1150fdcfd9a76e495e7aa913aa Mon Sep 17 00:00:00 2001
From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
Date: Mon, 23 Nov 2015 20:27:23 +0800
Subject: [PATCH 2/2] blk-merge: fix blk_bio_segment_split

Commit bdced438acd83a(block: setup bi_phys_segments after
splitting) introduces function of computing bio->bi_phys_segments
during bio splitting.

Unfortunately both bio->bi_seg_front_size and bio->bi_seg_back_size
arn't computed, so too many physical segments may be obtained
for one request since both the two are used to check if one segment
across two bios can be possible.

This patch fixes the issue by computing the two variables in
blk_bio_segment_split().

Reported-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Reported-by: Mark Salter <msalter@xxxxxxxxxx>
Fixes: bdced438acd83a(block: setup bi_phys_segments after splitting)
Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxxxxx>
---
  block/blk-merge.c | 22 +++++++++++++++++++---
  1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/block/blk-merge.c b/block/blk-merge.c
index f2efe8a..50793cd 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -76,6 +76,9 @@ static struct bio *blk_bio_segment_split(struct request_queue *q,
  	struct bio_vec bv, bvprv, *bvprvp = NULL;
  	struct bvec_iter iter;
  	unsigned seg_size = 0, nsegs = 0, sectors = 0;
+	unsigned front_seg_size = bio->bi_seg_front_size;
+	bool do_split = true;
+	struct bio *new = NULL;

  	bio_for_each_segment(bv, bio, iter) {
  		if (sectors + (bv.bv_len >> 9) > queue_max_sectors(q))
@@ -111,13 +114,26 @@ new_segment:
  		bvprvp = &bvprv;
  		seg_size = bv.bv_len;
  		sectors += bv.bv_len >> 9;
+
+		if (nsegs == 1 && seg_size > front_seg_size)
+			front_seg_size = seg_size;
  	}

-	*segs = nsegs;
-	return NULL;
+	do_split = false;
  split:
  	*segs = nsegs;
-	return bio_split(bio, sectors, GFP_NOIO, bs);
+
+	if (do_split) {
+		new = bio_split(bio, sectors, GFP_NOIO, bs);
+		if (new)
+			bio = new;
+	}
+
+	bio->bi_seg_front_size = front_seg_size;
+	if (seg_size > bio->bi_seg_back_size)
+		bio->bi_seg_back_size = seg_size;
+
+	return do_split ? new : NULL;
  }

  void blk_queue_split(struct request_queue *q, struct bio **bio,


I applied both your patches and tested on Overdrive 3000. This fixes the issue for me.

Added linux-arm-kernel, since arm64 triggers this issue.

Thanks Ming and testers for your hard work on this.

Tested-by: Alan Ott <alan@xxxxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux