DELL PERC5 controller's(device ID- 0x0015) firmware does not expose TAPE drives to driver in response of DCMD- MR_DCMD_PD_LIST_QUERY and it causes TAPE drives not be exposed to OS when connected behind PERC5 controller. This patch will unblock scanning of TAPE drives connected behind PERC5 controller by exposing non TYPE_DISK unconditionally. This patch should be applied on top of last 2 patch series submitted by me. Here is the links for those series- http://marc.info/?l=linux-scsi&m=144489694505390&w=2 and http://marc.info/?l=linux-scsi&m=144102204225400&w=2 Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxxxxxxxx> Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxxx> --- drivers/scsi/megaraid/megaraid_sas.h | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 20 +++++++++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 9b918ab..86572ee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -1790,6 +1790,7 @@ struct megasas_instance { u8 UnevenSpanSupport; u8 supportmax256vd; + u8 allow_fw_scan; u16 fw_supported_vd_count; u16 fw_supported_pd_count; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index f8d5455..dfe1a3a 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1760,6 +1760,20 @@ static void megasas_set_dma_alignment(struct scsi_device *sdev) static int megasas_slave_configure(struct scsi_device *sdev) { + u16 pd_index = 0; + struct megasas_instance *instance; + + instance = megasas_lookup_instance(sdev->host->host_no); + if (instance->allow_fw_scan) { + if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && + sdev->type == TYPE_DISK) { + pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + + sdev->id; + if (instance->pd_list[pd_index].driveState != + MR_PD_STATE_SYSTEM) + return -ENXIO; + } + } megasas_set_dma_alignment(sdev); /* * The RAID firmware may require extended timeouts. @@ -1783,9 +1797,8 @@ static int megasas_slave_alloc(struct scsi_device *sdev) pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id; - if ((instance->pd_list[pd_index].driveState == - MR_PD_STATE_SYSTEM) || - (instance->pd_list[pd_index].driveType != TYPE_DISK)) { + if ((instance->allow_fw_scan || instance->pd_list[pd_index].driveState == + MR_PD_STATE_SYSTEM)) { return 0; } return -ENXIO; @@ -4699,6 +4712,7 @@ static int megasas_init_fw(struct megasas_instance *instance) case PCI_DEVICE_ID_DELL_PERC5: default: instance->instancet = &megasas_instance_template_xscale; + instance->allow_fw_scan = 1; break; } -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
