From: Kevin Barnett <kevin.barnett@xxxxxxxx>
setup for sas transport. Need to set the
bus and target accordingly.
Reviewed-by: Scott Teel <scott.teel@xxxxxxxx>
Reviewed-by: Justin Lindley <justin.lindley@xxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxx>
---
drivers/scsi/hpsa.c | 25 ++++++++++++-------------
drivers/scsi/hpsa.h | 5 +++++
2 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 54c816a..2c26f1c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3503,38 +3503,37 @@ static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
return 0;
}
-/* Helper function to assign bus, target, lun mapping of devices.
- * Puts non-external target logical volumes on bus 0, external target logical
- * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
+/*
+ * Helper function to assign bus, target, lun mapping of devices.
* Logical drive target and lun are assigned at this time, but
* physical device lun and target assignment are deferred (assigned
* in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
- */
+*/
static void figure_bus_target_lun(struct ctlr_info *h,
u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device)
{
- u32 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
+ u32 lunid = get_unaligned_le32(lunaddrbytes);
if (!is_logical_dev_addr_mode(lunaddrbytes)) {
/* physical device, target and lun filled in later */
if (is_hba_lunid(lunaddrbytes))
- hpsa_set_bus_target_lun(device, 3, 0, lunid & 0x3fff);
+ hpsa_set_bus_target_lun(device,
+ HPSA_HBA_BUS, 0, lunid & 0x3fff);
else
/* defer target, lun assignment for physical devices */
- hpsa_set_bus_target_lun(device, 2, -1, -1);
+ hpsa_set_bus_target_lun(device,
+ HPSA_PHYSICAL_DEVICE_BUS, -1, -1);
return;
}
/* It's a logical device */
if (is_ext_target(h, device)) {
- /* external target way, put logicals on bus 1
- * and match target/lun numbers box
- * reports, other smart array, bus 0, target 0, match lunid
- */
hpsa_set_bus_target_lun(device,
- 1, (lunid >> 16) & 0x3fff, lunid & 0x00ff);
+ HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
+ lunid & 0x00ff);
return;
}
- hpsa_set_bus_target_lun(device, 0, 0, lunid & 0x3fff);
+ hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS,
+ 0, lunid & 0x3fff);
}
/*
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 4248522..c50fc5d 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -367,6 +367,11 @@ struct offline_device_entry {
#define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0
#define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4
+#define HPSA_PHYSICAL_DEVICE_BUS 0
+#define HPSA_RAID_VOLUME_BUS 1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS 2
+#define HPSA_HBA_BUS 3
+
/*
Send the command to the hardware
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
