[PATCH 10/21] hpsa: simplify update scsi devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kevin Barnett <kevin.barnett@xxxxxxxx>

remove repeated calculation that checks for physical
or logical devices.

Reviewed-by: Scott Teel <scott.teel@xxxxxxxx>
Reviewed-by: Justin Lindley <justin.lindley@xxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxx>
---
 drivers/scsi/hpsa.c |   23 ++++++++++++++---------
 drivers/scsi/hpsa.h |    1 +
 2 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 7d109bc..1598573 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3745,6 +3745,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	int ncurrent = 0;
 	int i, n_ext_target_devs, ndevs_to_allocate;
 	int raid_ctlr_position;
+	bool physical_device;
 	DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
 
 	currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
@@ -3805,16 +3806,17 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		int rc = 0;
 		int phys_dev_index = i - (raid_ctlr_position == 0);
 
+		physical_device = i < nphysicals + (raid_ctlr_position == 0);
+
 		/* Figure out where the LUN ID info is coming from */
 		lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
 			i, nphysicals, nlogicals, physdev_list, logdev_list);
 
 		/* skip masked non-disk devices */
-		if (MASKED_DEVICE(lunaddrbytes))
-			if (i < nphysicals + (raid_ctlr_position == 0) &&
-				(physdev_list->
-				LUN[phys_dev_index].device_flags & 0x01))
-				continue;
+		if (physical_device &&
+			MASKED_DEVICE(lunaddrbytes) &&
+			(physdev_list->LUN[phys_dev_index].device_flags & 0x01))
+			continue;
 
 		/* Get device type, vendor, model, device id */
 		rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
@@ -3850,10 +3852,13 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		}
 
 		*this_device = *tmpdevice;
+		this_device->physical_device = physical_device;
 
-		/* do not expose masked devices */
-		if (MASKED_DEVICE(lunaddrbytes) &&
-			i < nphysicals + (raid_ctlr_position == 0))
+		/*
+		 * Expose all devices except for physical devices that
+		 * are masked.
+		 */
+		if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device)
 			this_device->expose_device = 0;
 		else
 			this_device->expose_device = 1;
@@ -3871,7 +3876,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 				ncurrent++;
 			break;
 		case TYPE_DISK:
-			if (i < nphysicals + (raid_ctlr_position == 0)) {
+			if (this_device->physical_device) {
 				/* The disk is in HBA mode. */
 				/* Never use RAID mapper in HBA mode. */
 				this_device->offload_enabled = 0;
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index aab722a..4248522 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -37,6 +37,7 @@ struct hpsa_scsi_dev_t {
 	int devtype;
 	int bus, target, lun;		/* as presented to the OS */
 	unsigned char scsi3addr[8];	/* as presented to the HW */
+	u8 physical_device;
 	u8 expose_device;
 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
 	unsigned char device_id[16];    /* from inquiry pg. 0x83 */

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux