From: Scott Teel <scott.teel@xxxxxxxx>
Set reset type in device_reset_handler to do either
logical unit reset for logical devices, or physical
target reset, for physical devices.
Reviewed-by: Scott Teel <scott.teel@xxxxxxxx>
Reviewed-by: Justin Lindley <justin.lindley@xxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxx>
---
drivers/scsi/hpsa.c | 33 +++++++++++++++++++++++++++------
drivers/scsi/hpsa.h | 1 +
2 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 714bb76..0d08682 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2728,9 +2728,8 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
/* fill_cmd can't fail here, no data buffer to map. */
- (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+ (void) fill_cmd(c, reset_type, h, NULL, 0, 0,
scsi3addr, TYPE_MSG);
- c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */
rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
if (rc) {
dev_warn(&h->pdev->dev, "Failed to send reset command\n");
@@ -5200,6 +5199,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
int rc;
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
+ u8 reset_type;
char msg[48];
/* find the controller to which the command to be aborted was sent */
@@ -5238,15 +5238,22 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
if (is_hba_lunid(dev->scsi3addr))
return SUCCESS;
- hpsa_show_dev_msg(__stringify(KERN_WARNING), h, dev, "resetting");
+ if (is_logical_dev_addr_mode(dev->scsi3addr))
+ reset_type = HPSA_DEVICE_RESET_MSG;
+ else
+ reset_type = HPSA_PHYS_TARGET_RESET;
+
+ sprintf(msg, "resetting %s",
+ reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
atomic_set(&h->reset_in_progress, 1);
/* send a reset to the SCSI LUN which the command was sent to */
- rc = hpsa_do_reset(h, dev, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
+ rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type,
DEFAULT_REPLY_QUEUE);
- snprintf(msg, sizeof(msg), "reset %s",
- rc == 0 ? "completed successfully" : "failed");
+ sprintf(msg, "reset %s %s",
+ reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
+ rc == 0 ? "completed successfully" : "failed");
hpsa_show_dev_msg(__stringify(KERN_WARNING), h, dev, msg);
atomic_set(&h->reset_in_progress, 0);
return rc == 0 ? SUCCESS : FAILED;
@@ -6364,6 +6371,20 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
+ case HPSA_PHYS_TARGET_RESET:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
+ c->Request.Timeout = 0; /* Don't time out */
+ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+ c->Request.CDB[0] = HPSA_RESET;
+ c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE;
+ /* Physical target reset needs no control bytes 4-7*/
+ c->Request.CDB[4] = 0x00;
+ c->Request.CDB[5] = 0x00;
+ c->Request.CDB[6] = 0x00;
+ c->Request.CDB[7] = 0x00;
+ break;
case HPSA_DEVICE_RESET_MSG:
c->Request.CDBLen = 16;
c->Request.type_attr_dir =
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index c7c1697..fb07b70 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -285,6 +285,7 @@ struct offline_device_entry {
#define HPSA_RESET_TYPE_BUS 0x01
#define HPSA_RESET_TYPE_TARGET 0x03
#define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
#define HPSA_MSG_SEND_RETRY_LIMIT 10
#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
