Most sense code is already handled in the generic
code, so we shouldn't be adding special cases here.
However, when doing so we need to check for
unit attention whenever we're sending an internal
command.
Reviewed-by: Ewan Milne <emilne@xxxxxxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 36 +++++++++---------------------
1 file changed, 10 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 5908ef2..398ea81 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -91,7 +91,6 @@ struct alua_dh_data {
#define ALUA_POLICY_SWITCH_ALL 1
static char print_alua_state(int);
-static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *);
static void release_port_group(struct kref *kref)
{
@@ -332,28 +331,6 @@ static int alua_check_sense(struct scsi_device *sdev,
* LUN Not Accessible - ALUA state transition
*/
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
- /*
- * LUN Not Accessible -- Target port in standby state
- */
- return SUCCESS;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c)
- /*
- * LUN Not Accessible -- Target port in unavailable state
- */
- return SUCCESS;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12)
- /*
- * LUN Not Ready -- Offline
- */
- return SUCCESS;
- if (sdev->allow_restart &&
- sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02)
- /*
- * if the device is not started, we need to wake
- * the error handler to start the motor
- */
- return FAILED;
break;
case UNIT_ATTENTION:
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
@@ -455,9 +432,16 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg, int w
pg->flags |= ALUA_RTPG_EXT_HDR_UNSUPP;
goto retry;
}
-
- err = alua_check_sense(sdev, &sense_hdr);
- if (err == ADD_TO_MLQUEUE && time_before(jiffies, expiry)) {
+ /*
+ * Retry on ALUA state transition or if any
+ * UNIT ATTENTION occurred.
+ */
+ if (sense_hdr.sense_key == NOT_READY &&
+ sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
+ err = SCSI_DH_RETRY;
+ else if (sense_hdr.sense_key == UNIT_ATTENTION)
+ err = SCSI_DH_RETRY;
+ if (err == SCSI_DH_RETRY && time_before(jiffies, expiry)) {
sdev_printk(KERN_ERR, sdev, "%s: rtpg retry\n",
ALUA_DH_NAME);
scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr);
--
1.8.5.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
