On Thu, 2015-08-27 at 14:41 +0200, Hannes Reinecke wrote:
> The SCSI device now has the VPD page 0x83 information attached,
> so there is no need to query it again.
>
> Reviewed-by: Christoph Hellwig <hch@xxxxxx>
> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
> ---
> drivers/scsi/device_handler/scsi_dh_alua.c | 83 +++++-------------------------
> 1 file changed, 13 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
> index 7d01ef0..f15b977 100644
> --- a/drivers/scsi/device_handler/scsi_dh_alua.c
> +++ b/drivers/scsi/device_handler/scsi_dh_alua.c
> @@ -131,43 +131,6 @@ static struct request *get_alua_req(struct scsi_device *sdev,
> }
>
> /*
> - * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
> - * @sdev: sdev the command should be sent to
> - */
> -static int submit_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
> -{
> - struct request *rq;
> - int err = SCSI_DH_RES_TEMP_UNAVAIL;
> -
> - rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
> - if (!rq)
> - goto done;
> -
> - /* Prepare the command. */
> - rq->cmd[0] = INQUIRY;
> - rq->cmd[1] = 1;
> - rq->cmd[2] = 0x83;
> - rq->cmd[4] = h->bufflen;
> - rq->cmd_len = COMMAND_SIZE(INQUIRY);
> -
> - rq->sense = h->sense;
> - memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
> - rq->sense_len = h->senselen = 0;
> -
> - err = blk_execute_rq(rq->q, NULL, rq, 1);
> - if (err == -EIO) {
> - sdev_printk(KERN_INFO, sdev,
> - "%s: evpd inquiry failed with %x\n",
> - ALUA_DH_NAME, rq->errors);
> - h->senselen = rq->sense_len;
> - err = SCSI_DH_IO;
> - }
> - blk_put_request(rq);
> -done:
> - return err;
> -}
> -
> -/*
> * submit_rtpg - Issue a REPORT TARGET GROUP STATES command
> * @sdev: sdev the command should be sent to
> */
> @@ -359,43 +322,24 @@ static int alua_check_tpgs(struct scsi_device *sdev, struct alua_dh_data *h)
> }
>
> /*
> - * alua_vpd_inquiry - Evaluate INQUIRY vpd page 0x83
> + * alua_check_vpd - Evaluate INQUIRY vpd page 0x83
> * @sdev: device to be checked
> *
> * Extract the relative target port and the target port group
> * descriptor from the list of identificators.
> */
> -static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
> +static int alua_check_vpd(struct scsi_device *sdev, struct alua_dh_data *h)
> {
> - int len;
> - unsigned err;
> unsigned char *d;
>
> - retry:
> - err = submit_vpd_inquiry(sdev, h);
> -
> - if (err != SCSI_DH_OK)
> - return err;
> -
> - /* Check if vpd page exceeds initial buffer */
> - len = (h->buff[2] << 8) + h->buff[3] + 4;
> - if (len > h->bufflen) {
> - /* Resubmit with the correct length */
> - if (realloc_buffer(h, len)) {
> - sdev_printk(KERN_WARNING, sdev,
> - "%s: kmalloc buffer failed\n",
> - ALUA_DH_NAME);
> - /* Temporary failure, bypass */
> - return SCSI_DH_DEV_TEMP_BUSY;
> - }
> - goto retry;
> - }
> + if (!sdev->vpd_pg83)
> + return SCSI_DH_DEV_UNSUPP;
>
> /*
> - * Now look for the correct descriptor.
> + * Look for the correct descriptor.
> */
> - d = h->buff + 4;
> - while (d < h->buff + len) {
> + d = sdev->vpd_pg83 + 4;
> + while (d < sdev->vpd_pg83 + sdev->vpd_pg83_len) {
> switch (d[1] & 0xf) {
> case 0x4:
> /* Relative target port */
> @@ -422,14 +366,13 @@ static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
> ALUA_DH_NAME);
> h->state = TPGS_STATE_OPTIMIZED;
> h->tpgs = TPGS_MODE_NONE;
> - err = SCSI_DH_DEV_UNSUPP;
> - } else {
> - sdev_printk(KERN_INFO, sdev,
> - "%s: port group %02x rel port %02x\n",
> - ALUA_DH_NAME, h->group_id, h->rel_port);
> + return SCSI_DH_DEV_UNSUPP;
> }
> + sdev_printk(KERN_INFO, sdev,
> + "%s: port group %02x rel port %02x\n",
> + ALUA_DH_NAME, h->group_id, h->rel_port);
>
> - return err;
> + return 0;
> }
>
> static char print_alua_state(int state)
> @@ -692,7 +635,7 @@ static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h)
> if (err != SCSI_DH_OK)
> goto out;
>
> - err = alua_vpd_inquiry(sdev, h);
> + err = alua_check_vpd(sdev, h);
> if (err != SCSI_DH_OK)
> goto out;
>
Reviewed-by: Ewan D. Milne <emilne@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
