On 09/17/2015 04:45 AM, Alim Akhtar wrote:
> From: Seungwon Jeon <essuuj@xxxxxxxxx>
>
> This patch introduces Exynos UFS PHY driver. This driver
> supports to deal with phy calibration and power control
> according to UFS host driver's behavior.
>
> Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx>
> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> .../devicetree/bindings/phy/samsung-phy.txt | 22 ++
It is preferred to put the binding in a separate patch.
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-exynos-ufs.c | 262 ++++++++++++++++++++
> drivers/phy/phy-exynos-ufs.h | 85 +++++++
> drivers/phy/phy-exynos7-ufs.h | 89 +++++++
> include/linux/phy/phy-exynos-ufs.h | 107 ++++++++
> 7 files changed, 573 insertions(+)
> create mode 100644 drivers/phy/phy-exynos-ufs.c
> create mode 100644 drivers/phy/phy-exynos-ufs.h
> create mode 100644 drivers/phy/phy-exynos7-ufs.h
> create mode 100644 include/linux/phy/phy-exynos-ufs.h
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> index 60c6f2a..1abe2c4 100644
> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> @@ -174,3 +174,25 @@ Example:
> usbdrdphy0 = &usb3_phy0;
> usbdrdphy1 = &usb3_phy1;
> };
> +
> +Samsung Exynos7 soc serise UFS PHY Controller
s/serise/series/
> +---------------------------------------------
> +
> +UFS PHY nodes are defined to describe on-chip UFS Physical layer controllers.
> +Each UFS PHY controller should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains "samsung,exynos7-ufs-phy"
> +- reg : offset and length of the UFS PHY register set;
> +- reg-names : reg name(s) must be 'phy-pma';
> +- #phy-cells : must be zero
> +- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
How about samsung,pmu-syscon as syscon can mean a variety of things?
> +
> +Example:
> + ufs_phy: ufs-phy@0x15571800 {
> + compatible = "samsung,exynos7-ufs-phy";
> + reg = <0x15571800 0x240>;
> + reg-names = "phy-pma";
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + #phy-cells = <0>;
> + };
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 6b8dd16..7449376 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -358,4 +358,11 @@ config PHY_BRCMSTB_SATA
> Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>
> +config PHY_EXYNOS_UFS
> + tristate "EXYNOS SoC series UFS PHY driver"
> + depends on OF && ARCH_EXYNOS
|| COMPILE_TEST
> + select GENERIC_PHY
> + help
> + Support for UFS PHY on Samsung EXYNOS chipsets.
> +
> endmenu
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
