Hi Amit,
On 08/26/2015 11:53 AM, amit daniel kachhap wrote:
On Fri, Aug 21, 2015 at 2:57 PM, Alim Akhtar <alim.akhtar@xxxxxxxxxxx> wrote:
From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
It can be used in the vendor's driver for the specific purpose.
more description of this log will be useful.
Will reword.
Thanks
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 5 ++---
drivers/scsi/ufs/ufshcd.h | 2 ++
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index d425ea1..8982da9 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -185,8 +185,6 @@ static int ufshcd_uic_hibern8_ctrl(struct ufs_hba *hba, bool en);
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
static irqreturn_t ufshcd_intr(int irq, void *__hba);
-static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
- struct ufs_pa_layer_attr *desired_pwr_mode);
static int ufshcd_change_power_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *pwr_mode);
@@ -2597,7 +2595,7 @@ static int ufshcd_change_power_mode(struct ufs_hba *hba,
* @hba: per-adapter instance
* @desired_pwr_mode: desired power configuration
*/
-static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+int ufshcd_config_pwr_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *desired_pwr_mode)
{
struct ufs_pa_layer_attr final_params = { 0 };
@@ -2613,6 +2611,7 @@ static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
return ret;
}
+EXPORT_SYMBOL_GPL(ufshcd_config_pwr_mode);
/**
* ufshcd_complete_dev_init() - checks device readiness
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 045968e..13368e1 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -636,6 +636,8 @@ extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
u8 attr_set, u32 mib_val, u8 peer);
extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
u32 *mib_val, u8 peer);
+extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *desired_pwr_mode);
/* UIC command interfaces for DME primitives */
#define DME_LOCAL 0
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
